Paulmann Micro-Line Domomat LED Fixture Installation Guide
Brand: Paulmann
Article Numbers: 935.55, 935.56, 935.57
Info Hotline: +49 (0) 5041 998 389 (Monday-Thursday 7:00-20:00, Friday 7:00-17:00)
Manufacturer: Paulmann Licht GmbH, Quezinger Feld 2, 31832 Springe, Germany
Website: www.paulmann.com
Safety Instructions
Please observe the following safety instructions:
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 13
- 15, 16, 17, 18, 19, 20, 21, 22
- 24, 25, 26, 27, 28, 33, 34
CE Certified
Product Overview and Components
This section details the components included and the general installation layout.
Included Components:
- 1x LED Driver/Transformer
- 1x Light Fixture
- 1x Connection Cable (included)
Installation Layout:
The fixture is designed for ceiling or wall mounting. Ensure the following minimum clearances:
- Minimum 50mm clearance from adjacent surfaces.
- Minimum 300mm clearance from the driver to the fixture.
- The fixture housing thickness is between 3-20mm.
- Minimum 50mm clearance from the driver to adjacent surfaces.
- Minimum 30mm clearance from the fixture to the mounting surface (e.g., ceiling).
Important Warning: A warning symbol ⚠️ indicates potential hazards during installation. Ensure proper wiring and handling.
Installation Steps
Section A: Wiring Connections
This section illustrates the electrical connections required.
Step 1: Wire Preparation
Prepare the wires by stripping 14mm of insulation from the mains supply cable and 7mm from the fixture cable.
Step 2: Connecting to Mains Power
Connect the mains supply (230V~) to the appropriate terminals. Observe safety instructions Nr. 4, 5, 6. A warning symbol ⚡ is shown, indicating the need for caution with mains voltage.
Diagram Description: Shows a junction box with terminals labeled L (Live), N (Neutral), and Earth. Wires from the mains supply and the fixture are connected to these terminals. Includes symbols indicating correct connection ✔️ and incorrect connection ❌.
Section B: Mounting the Fixture Base
This section shows how to securely attach the fixture base to the mounting surface.
Procedure: Use screws to fix the fixture base to the ceiling or wall. Observe safety instructions Nr. 4, 5, 6.
Diagram Description: Illustrates screwing the fixture's mounting bracket or base onto the ceiling.
Section C: Fixture Dimensions and Safety
Details the physical dimensions of the fixture and highlights safety considerations.
Fixture Diameter: Approximately 54mm.
Safety Instructions: Refer to Nr. 4, 6, 7. A warning symbol ⚠️ is present.
Section D: Connecting and Testing the Fixture
This section covers connecting the fixture to the driver and testing its operation.
Connecting Fixture: Connect the fixture cable to the driver. Observe safety instructions Nr. 19, 20.
Testing: After connecting power, test the fixture. A correct connection is indicated by a ✔️ symbol, and an incorrect connection by a ❌ symbol. A ⚡ symbol is shown.
Operation: The fixture can be turned ON and OFF using a standard switch.
Diagram Description: Shows the fixture being connected to the driver, then power being supplied. Includes symbols for ON/OFF states and electrical safety.
Section E: Final Installation and Placement
This section shows the completed installation and options for multiple fixtures.
Final Attachment: The fixture is attached to the mounted base.
Multiple Fixtures: Shows examples of multiple fixtures (labeled A, B, C, D, E) installed in a ceiling.
Illumination: Depicts the fixture illuminated (ON) and emitting light.
Diagram Description: Illustrates the final mounting of the light fixture and shows a ceiling with several installed units, some illuminated.
