Paulmann URail Track Spot Socket Installation and Safety Guide
Model Numbers: 952.00, 949.73, 949.74, 949.75
Product Overview
This document provides installation instructions and safety information for the Paulmann URail track spot socket. It is designed for use with the URail track system and accommodates an E27 lamp up to 20W.
Safety Instructions
Please read and follow all safety instructions carefully before installation and use.
- 1. Read these instructions carefully before assembly.
- 2. Keep these instructions for future reference.
- 3. Observe all safety instructions.
- 4. Observe all instructions.
- 5. Do not use the product if it is damaged.
- 6. Observe the safety instructions for the track system.
- 8. Ensure that the product is switched off before assembly.
- 15. The product must be installed by a qualified electrician.
- 16. The product must be installed according to the applicable regulations.
- 33. The maximum wattage of the lamp must not be exceeded.
- 34. The product is suitable for indoor use only.
For a comprehensive list of safety symbols and their meanings, please visit www.paulmann.com/symbols.
Installation Guide
Follow these steps for proper installation:
Step A: Mounting Bracket
Attach the mounting bracket to the URail track system. Slide the bracket into the track and secure it in place. [Upward arrow indicating insertion into track, then slide motion].
Step B: Electrical Connection
Ensure the power supply is switched OFF [Power symbol crossed out]. Connect the wires to the appropriate terminals (e.g., L for Live, N for Neutral, Ground symbol). Verify correct polarity and voltage [Information symbol with equals sign, Light bulb symbol with equals sign].
Step C: Attach Fixture Body
Connect the main body of the spotlight to the mounted bracket. [Upward arrow indicating attachment].
Step D: Secure Fixture
Secure the spotlight to the bracket using the locking mechanism.
Step E: Insert Lamp
Insert the E27 lamp into the socket provided within the fixture.
Step F: Attach Cover
Place and secure the glass cover or shade onto the spotlight. [Upward arrow indicating attachment].
Step G: Assembled Fixture
The assembled spotlight is now correctly mounted on the URail track.
Step H: Install Bulb
Screw the light bulb into the E27 socket. [Circular arrow indicating screwing motion].