Eufy Clean X8 Pro

About Eufy Clean X8 Pro

Thank you for purchasing this product. Please read all instructions in this manual before use and keep it for future reference.

Package Contents

The package includes the following items:

• Main Unit (RoboVac)
• Mop Module
• Charging Station (for T2266)
• Self-Empty Station (with dust bag) (for T2276)
• AC Adapter
• Power Cord
• Waterproof Pad
• Cleaning Tool
• Instruction Manual and other documents

Note: Actual design and illustrations may vary slightly.

Parts Name

A. Top View

• Start/Pause Button
• Spot Mode Button
• Laser Sensor
• Charging Button
• Dust Bin
• Top Cover
• Wi-Fi Indicator
• Reset Button (Reset)

To reset the main unit: Open the top cover and press the reset button with a pointed object.

B. Side View

• Charging Terminals (x2)
• Release Button
• Water Tank
• Mop Module
• Bumper
• Air Vent

C. Bottom View

• Rolling Brush
• Rolling Wheels (x2)
• Charging Terminals (x2)
• Brush Guard
• Side Brush
• Fall Prevention Sensors (x4)

D. Charging Station (for T2266 only)

• LED Indicator
• Charging Terminals (x2)
• Power Cord Slot
• Power Cord Storage

Button Functions

• Charging Button:
  • Press once: Return to station
  • During operation, press once: Pause/End cleaning
  • Press and hold for 3 seconds: Power On/Off (if not charging)
  • Press once: Start auto-mode cleaning
  • During operation, press once: Pause/End cleaning
  • Press and hold for 3 seconds: Start auto-mode cleaning
  • During operation, press once: Pause/End cleaning
  • Press and hold for 5 seconds simultaneously: Reset Wi-Fi connection

E. Self-Empty Station (for T2276 only)

LED Indicator

• Solid White: Normal operation
• White Flashing: Connected to station (when using disposable dust bag)
• Red Flashing: Error (Refer to app notifications or voice prompts for solutions)

Components: Disposable Dust Bag, Charging Socket, Infrared Sensor (helps the unit return to the station).

F. Mop Module

Components: Mopping Cloth, Mopping Cloth Attachment Slot.

The status of the product can be checked via the LED indicator.

How to Use

Precautions for Use

A. Ensure the area is clear of power cords and small toys to prevent entanglement.

B. For rugs with fringes, tuck the fringes under the rug. Do not use on dark, high-pile, or thick carpets (over 26mm) as it may cause malfunction.

C. Place physical barriers in front of heat sources or areas that could cause damage (e.g., vents).

D. Do not vacuum large amounts of water, as this can damage the product.

E. The product can overcome obstacles up to 20mm high. Remove other obstacles where possible.

F. The product has drop and anti-tip sensors. However, these may not function optimally on highly reflective, dark, or dirty surfaces. Use physical barriers in such areas to prevent falls.

Before First Use

1. Remove any cushioning material from the bumper.
2. Place the charging station on a flat floor against a wall. Ensure at least 0.5m clearance on the sides and 1.5m in front.
3. Do not place the station on carpets, as the product may get stuck or fail to return.
4. Connect the power cord or AC adapter to the station and a power outlet. The station's LED indicator will light up solid white when connected to AC power.

Charging Method

Ensure the power cord is connected to the outlet.

Charge the unit at least once every 6 months to maintain battery health.

Automatic Charging: The product will automatically return to the station to charge when cleaning is complete or the battery is low.

Manual Charging: Press the charging button on the unit or tap the charging icon in the Eufy Clean app.

Auto-Recharge and Resume Cleaning (T2276 only): After cleaning for 15 minutes and returning to the Self-Empty Station, the product will automatically empty its dustbin. Ensure the dust bag is properly installed.

The product will automatically return to the station to charge when:

• Cleaning is complete.
• Battery level is low during cleaning. The product will resume cleaning once charged to 80%.

Operating the Product with the Eufy Clean App

It is recommended to use the Eufy Clean app to access all features.

Requirements:

• Smartphone/tablet with iOS 11 or later, or Android 8.0 or later.

Power On/Off: Press and hold the power button for 3 seconds.

Wi-Fi Connection:

1. Download the Eufy Clean app (iOS/Android).
2. Open the app and create a user account.
3. Tap the '+' icon to add your product.
4. Follow the app instructions to set up Wi-Fi.

Once connected, you can control the product via the app. Features include mode selection, scheduling, map display, setting no-go zones, and network status.

Wi-Fi Indicator:

• Slow Flashing Blue: Waiting for connection
• Fast Flashing Blue: Connected to Wi-Fi
• Solid Blue: Wi-Fi connected

Wi-Fi Reset: Press and hold the power and Wi-Fi buttons simultaneously for 5 seconds until you hear a voice prompt. Follow app instructions to reconnect.

Ensure your Wi-Fi router is broadcasting on the 2.4GHz band.

Scheduling

Use the Eufy Clean app to set cleaning schedules for specific times and days.

Auto Mode

When started, the product determines its cleaning path and cleans in parallel lines. It returns to the station upon completion.

Press the power button to start Auto Mode (default). Press again to pause.

Selecting Cleaning Mode

Spot Mode

Cleans a concentrated 1.5m x 1.5m area. Ideal for areas with accumulated dirt. Returns to the station automatically after cleaning.

Press the power button to start Spot Mode.

Suction Power Level

Select suction levels (Quiet, Standard (default), Turbo, Max) via the Eufy Clean app.

The last selected suction level will be used for the next cleaning session.

Room-Specific Mode (Available via Eufy Clean App Only)

Requires the app to generate a map of your home. Allows you to select specific rooms for cleaning. You can customize room assignments in the app. The product will only clean the selected rooms and return to the station.

BoostIQ™ Feature

When enabled, BoostIQ™ automatically increases suction power when it detects a need for stronger cleaning (e.g., on carpets or heavily soiled areas). This may increase noise and cleaning time but improves cleaning performance.

Mopping Mode

To start mopping:

1. Attach the waterproof pad sticker to the bottom of the station and place the pad under the station to protect floors from moisture. Ensure it is securely attached.
2. Remove the water tank from the main unit. Open the water inlet cover, fill with water, and close the cover.
3. Reinsert the water tank into the main unit.
4. Attach the mop module to the bottom of the main unit until it clicks into place.
5. Remove the mopping cloth from the mop module. Wet and wring out the cloth. Insert it into the mop module slots and attach securely.

Do not add detergent to the water tank, as this may damage the product.

Operating the Product with Amazon Alexa or Google Assistant

You can control the Eufy Clean X8 Pro using voice commands with Amazon Alexa or Google Assistant devices.

Requirements:

• The product must be connected to the station and fully charged.
• The product must be connected to the Eufy Clean app.
• An Amazon Echo or Google Home device (sold separately).
• Amazon Alexa app or Google Home app installed and account created on your smartphone.

To set up:

1. Open the Eufy Clean app and find "Smart Link" in the top left corner.
2. Follow the on-screen instructions to complete the setup.

Setting Up Virtual Walls (Available via Eufy Clean App Only)

Use the Eufy Clean app to set "No-go Zones" and "Virtual Walls" to restrict the robot's movement. This can eliminate the need for physical barriers in most cases.

Note: It is still recommended to use physical barriers for heat sources or areas that could damage the robot (e.g., vents).

• No-go Zone: The robot will not enter this area to clean.
• Virtual Wall: The robot will not cross this boundary.
• Water-Mopping Restricted Zone: The robot will not enter this zone when mopping.

To set these zones, you must first allow the robot to generate a map of your home.

Important: Even with restricted zones set, the robot may occasionally enter them due to position correction errors, sensor malfunctions, or environmental changes. Moving the robot or changing its surroundings may require re-mapping.

Main Unit Cleaning and Maintenance

Before cleaning, turn off the main unit and unplug the charging station/self-empty station.

Follow these steps for regular cleaning and maintenance to ensure optimal performance.

Recommended Cleaning/Replacement Frequency

Note: These are general guidelines; adjust based on usage.

Dust Bin and Filter Cleaning Method

1. Open the top cover and remove the dust bin.
2. Press the release button on the side of the dust bin, open it, remove the filter, and empty the contents.
3. Wash the dust bin and filter with water. Do not use hot water or detergent on the filter.
4. Completely air dry the dust bin and filter. Do not use the filter if it is not completely dry, as it may affect cleaning performance.
5. Reattach the filter to the dust bin.
6. Reinstall the dust bin into the main unit.

Main Brush Cleaning Method

It is recommended to use the self-cleaning function of the main brush.

1. Press the tabs and remove the brush guard.
2. Remove the main brush. If hair is tangled, carefully cut it with scissors. Be careful not to cut the brush itself.
3. Reinsert the main brush, aligning the end with the roller first.
4. Close the brush guard by pressing it until it clicks. Ensure the main brush is not caught while closing.

Side Brush Cleaning Method

Hair and debris can easily get tangled around the side brush. Clean regularly.

1. Loosen the screw on the side brush with a screwdriver and remove the side brush. Screwdriver not included.
2. Carefully remove any hair or debris tangled between the main unit and the side brush.
3. Wash the side brush with water.

Sensor and Charging Terminal Cleaning Method

For optimal performance, regularly clean the fall prevention sensors and charging terminals.

• Use a dry cloth or cleaning brush to remove dust from sensors and charging terminals.
• If the product fails to return to the station, clean the charging terminals.

Rolling Wheel Cleaning Method

Hair and dust can easily get tangled around the rolling wheels. Clean them regularly.

1. Insert a tool under the rolling wheel and remove it. Screwdriver not included.
2. Remove any hair or dust tangled around the rolling wheel and its internal components.
3. Reinstall the rolling wheel and push until it clicks into place. The rolling wheel cannot be washed with water.

Mopping Cloth Cleaning Method

1. After each use, remove the mopping cloth and water tank.
2. Wash the mopping cloth thoroughly with water.
3. Air dry the mopping cloth completely to prevent mold and odors.

Dust Bag Replacement (for T2276 only)

1. Lift and open the top cover.
2. Grasp the handle and pull out the dust bag.
3. Dispose of the used dust bag.
4. Insert the new dust bag by aligning its handle with the slot and pushing down until it clicks.

Troubleshooting

If problems persist, please contact customer support.

Product Specifications

(Diagram showing T2276 unit)

(Diagram showing T2266 unit)

Customer Support

Contact Us:

• Email: support@anker.com
• Phone: 03-4455-7823 (Weekdays 9:00-17:00, excluding year-end/new-year holidays)

For FAQs, please visit the support page on the Anker Japan official website: www.ankerjapan.com

Warranty Information

Up to 24 Months Warranty: For products purchased, Anker Japan offers a 18-month warranty against defects. This warranty is automatically extended to 24 months for registered members of the Anker Japan official website. This warranty covers repair or replacement of the product at Anker's discretion. Shipping costs for warranty service are covered by Anker. (Note: This warranty does not apply to pre-ordered items; the warranty period starts from the shipping date for pre-orders.)

In cases where replacement or repair with the same product is not possible due to stock issues or discontinuation, Anker may offer an equivalent product or a refund. Please understand that warranty does not cover damage caused by customer negligence.

Follow us:

• Facebook: @Anker Japan
• Twitter: @Anker_JP
• Instagram: @Eufy_JP
• Twitter: @eufy_by_anker