BIGBIG WON Rainbow Lite Controller
User Manual
Package Contents
- BIGBIG WON RAINBOW LITE*1
- User Manual*1
- Qualified Certification*1
- 1.8m Ultra-light soft braided data cable*1
Supported Platform
win10/11 / Switch
Name of Each Part
Front View:
- Indicator
- View button
- Menu button
- LT
- RT
- LB
- RB
- LS (Left Joystick)
- A/B/X/Y Buttons
- Left Joystick
- A Button
- LED4
- LED1
- LED3
- LED2
- Triangle button
- D-pad
- HOME button
- Right Joystick
- RS (Right Joystick)
Bottom View:
- M2 Remappable button
- M1 Remappable button
- FN button
- 3.5mm headphone jack
- USB port
- Type-C data cable
Connection
This controller is a wired controller, requiring a Type-C data cable to connect to the console.
Note: This controller supports Xinput and Switch modes. Ensure the correct mode is selected after connecting to the console. The default setting is Xinput.
- Steam: To connect to Steam, enable "Xbox Configuration Support" in Steam's "Settings - Controller - GENERAL CONTROLLER SETTINGS". Failure to do so may result in unrecognized issues within the game.
- Switch: After connecting to the Switch, enable "System Settings - Controllers and Sensors - Pro Controller Wired Communication".
Mode Switch
The controller supports two modes: Xinput and Switch. Switch to the corresponding mode for normal use.
- To Xinput mode: Hold the B + HOME button for 3 seconds until the indicator turns green.
- To Switch mode: Hold the A + HOME button for 3 seconds until the indicator turns red.
Light Effect
The controller features various built-in lighting effects. Double-click the FN button to switch or turn off the lights.
Remap
The controller has two remappable back buttons (M1/M2) that support changing key values.
- Remap: Press FN + (M1/M2). The indicator will breathe green, indicating remapping mode. Press the desired front button to map; the indicator will flash green twice upon successful mapping.
- Clear Key Value: Press and hold the button to cancel key mapping (M1/M2), then double-click FN. The indicator will flash green twice, confirming cancellation.
Turbo
The controller supports Turbo functionality for the following buttons: A/B/X/Y, LT/RT, LB/RB.
- Set TURBO: Hold FN + the button to be set. The indicator will flash orange, signifying activation. When Turbo is active, the 2nd and 3rd LEDs will flash according to the Turbo frequency.
- Cancel TURBO: Hold the button to cancel Turbo, then double-click FN. The indicator will flash orange twice, confirming cancellation.
- Turbo Frequency: Hold FN + ← to cycle through frequencies: 5/s, 10/s, and 20/s (default is 5/s).
Macro Recording
This controller supports macro recording. Each macro must be bound to a remappable back button (M1/M2) as the trigger. Supported buttons for recording include: A/B/X/Y, ↑/↓/←/→, LT/RT/LB/RB, RS/LS, and the eight directions of the joystick.
- MACRO Recording: Hold FN + (M1/M2) for 3 seconds. The indicator will breathe red, indicating macro recording mode. Press controller buttons to record the macro. Press FN once to end recording; the indicator will flash red twice. During macro execution, the four LEDs will flash from left to right until the macro finishes.
- Clear MACRO: Hold the button to cancel the macro (M1/M2), then double-click. The indicator will flash red twice, confirming cancellation.
Deadzones of Joystick
This controller is designed for competitive play with a default joystick deadzone of 0 for greater control accuracy. To accommodate more players, deadzones can be set to 0/10.
- Change Deadzone: Hold FN + the left or right joystick down (LS/RS) to switch between 0/10 for the deadzone of the respective joystick.
Hair Trigger
The hair trigger setting enhances linear trigger operation by providing a quicker response. A quick trigger loses its "linear" feel. Press the trigger to activate "on"; lift it for "off". You can press the trigger again without fully lifting it to the original position, optimizing operation speed.
- On/Off Hair Trigger: Hold the Triangle button + Trigger (LT/RT). The indicator will flash cyan twice, indicating the Hair Trigger is successfully turned on. Holding the Triangle button + Trigger (LT/RT) again will flash cyan twice, indicating the Hair Trigger is successfully turned off.
Screenshot
The controller supports one-click screenshots in Xinput and Switch modes. Clicking the Triangle button acts as the screenshot button. On PC, screenshot files are saved in "This computer - Pictures - Screenshot".
Audio
The controller supports audio input/output. Connect a headset with a microphone to the 3.5mm audio port at the bottom of the controller. Volume can be adjusted by pressing FN + ↑ / ↓ (PC only).
Vibration Adjustment
The controller supports four-speed vibration adjustment.
- Adjust Vibration: Press FN + →. The vibration motor can be cyclically switched between strong, medium, weak, and off.
Detailed Functional Operation Instructions
Please visit the BIGBIG WON Official Website > Support to access detailed instructions: https://www.bigbigwon.com/support/
Support and Community
Video Tutorial: Scan the QR code to watch a video tutorial or visit www.bigbigwon.com/support.
Support Request: For questions or issues, submit a request via the Amazon product page ("Ask a question" on the seller profile) or contact Customer Service at support@bigbigwon.com.
BIGBIG WON Community: Join the Discord server and follow social channels for the latest offerings, event coverage, and opportunities to win BIGBIG WON hardware.