Hytronik HED6045/BT LED Driver

Bluetooth 5.0 SIG Mesh, Dimmable, Constant Current

Product Description

The HED6045/BT is a Bluetooth dimmable LED driver with a maximum power output of 45W. It features a Switch-Dim interface, controllable via a push switch (retractive switch), and a Bluetooth dimming interface. This driver is ideal for direct projects or new luminaire designs by lighting manufacturers. With Bluetooth wireless mesh networking, it facilitates easier communication between luminaires, reducing the need for time-consuming hardwiring and saving project costs. Simple device setup and commissioning can be performed using the Koolmesh™ app.

It includes a 5-year warranty and is designed for a long lifetime of up to 50,000 hours.

Certifications: CB, CE, SELV, RED, UKCA.

App Features

Quick setup mode & advanced setup mode ⚙️
Floorplan feature to simplify project planning ?️
Web app/platform for dedicated project management ??
Koolmesh Pro iPad version for on-site configuration ?
Grouping luminaires via mesh network ?
Scenes ?
Detailed motion sensor settings ?⚙️
Push switch configuration ?⚙️
Schedule to run scenes based on time and date ⏰
Astro timer (sunrise and sunset) ☀️?
Staircase function (primary & secondary) ?
Internet-of-Things (IoT) featured ☁️
Device firmware update over-the-air (OTA) ?
Device social relations check ?
Bulk commissioning (copy and paste settings) ?
Power-on status (memory against power loss) ?
Offline commissioning ??
Different permission levels via authority management ?
Network sharing via QR code or keycode ??
Remote control via gateway support HBGW01 ?
Interoperability with Hytronik Bluetooth product portfolio ?
Compatible with EnOcean switch HBES01/W & HBES01/B ⚡
Continuous development in progress... ?

Hardware Features

Switch-Dim ?
Flicker free (1-100%) ✔️
Bluetooth dimmable control ??
Insulated terminal cover with cord restraint ?
Active PFC design >0.93 ⚡
Logarithmic Dimming ?
Linear Dimming ?
Configurable constant current (CC) output via DIP switch ⚙️
Loop-in and loop-out terminals for efficient installation ?
Open-circuit Protection ?❌
Short-circuit Protection ⚡❌
Overload Protection ⚖️❌

Technical Specifications

Bluetooth Transceiver

Operation frequency	2.4 GHz - 2.483 GHz
Transmission power	4 dBm
Range (Typical indoor)	10~30m
Protocol	Bluetooth 5.0 SIG Mesh ?

Input

Mains Voltage	220~240VAC ⚡
Mains Current	0.24~0.22A
Power Factor	0.95
Max. Efficiency	89% ?
Psb/Pno	<0.5W ?

Output

Output Current	350mA~1050mA ?
Output Voltage	10-54VDC ⚡
Uout Max.	75VDC ⚡⬆️
Turn-on Time	<0.5s ⏱️
Dimming Interface	Switch-Dim ?

Environment

Operation Temp.	-20 ~ +50°C ?️
Case Temp. (Max.)	80°C ?️
IP Rating	IP20 ?️

Safety and EMC

EMC Standard	EN55015, EN61547, EN61000-3-2/-3-3, EN300328, EN301489-1/-17, EN50663 ?
Safety Standard	EN61347-1, EN61347-2-13 ✅
Dielectric strength	Input→output: 3000VAC / 5mA /1min ⚡
Abnormal protection	Output short-circuit protection, Overload Protection, Open-circuit Protection ⚠️

Max. Output Power/Current/Voltage Range

HED6045/BT supports the following ranges:

3.5-19W / 350mA / 10-54VDC

5-27W / 500mA / 10-54VDC

6-32W / 600mA / 10-54VDC

7-38W / 700mA / 10-54VDC

8-42W / 800mA / 10-52VDC

9-45W / 900mA / 10-50VDC

9.5-45W / 950mA / 10-47VDC

10-45W / 1000mA / 10-45VDC

10.5-44W / 1050mA / 10-42VDC

Mechanical Structure & Dimensions

Diagrams illustrate the physical dimensions and structure of the LED driver for both built-in and stand-alone installations. Key dimensions are provided in millimeters. Wire preparation involves using a screwdriver to push down a button on the terminal to make or release wires (0.75-1.5mm² wire gauge supported).

Wiring Diagram

Wiring diagrams show the connections for AC input (L, N), push switch terminals (P1, P2), and LED output (LED+, LED-). The diagrams also indicate LED current selection terminals. A note specifies that there is no need for hardwiring push terminals between drivers; installers only need to connect push switches to the nearest driver, saving labor and cost. Push switches can be assigned to control any Bluetooth driver through app commissioning.

Loading and In-rush Current

Model	HED6045/BT
In-rush Current (Imax.)	17.8A ⚡⬆️
Pulse Time	72 µs ⏱️

Circuit Breaker Information

The table provides recommended circuit breaker types (B16A, B10A, B13A, B20A, B25A) and their corresponding maximum number of HED6045/BT drivers that can be connected. The data is calculated based on a formula and revised to take 60% of the calculated number for reliability, using ABB S200 series as a reference. Actual values may vary based on the circuit breaker type and installation environment.

Automatic circuit breaker type	B16A	B10A	B13A	B20A	B25A
HED6045/BT	43	27	35	54	67

Performance Characteristics

Graphs illustrate the product's performance:

Typical Efficiency vs Load: Shows efficiency across different load percentages for 500mA, 700mA, and 1000mA settings.
Typical Power Factor vs Load: Displays power factor across load percentages for 220V, 230V, and 240V.
Dimming Characteristics: Power output percentage is plotted against dim level.

Dimming Interface Operation Notes

Switch-Dim

The Switch-Dim interface allows for simple dimming using commercially available non-latching (momentary) wall switches. Up to 64 LED drivers can be connected to a single switch. Detailed push switch configurations can be set via the Koolmesh app.

Switch Function	Action	Descriptions
Push switch	Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid.	- Turn on/off - Recall a scene
Push switch	Double push	- Turn on only - Exit manual mode - Do nothing
	Long press (≥1 second)	- Dimming - Colour tuning - Do nothing
Simulate sensor	/	- Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information / Documents

For further details, please refer to the following resources on www.hytronik.com:

Regarding precautions for LED driver installation and operation: www.hytronik.com/download->knowledge->LED Drivers - Precautions for Product Installation and Operation
To learn more about detailed product features/functions: www.hytronik.com/download->knowledge->Introduction of App Scenes and Product Functions
Regarding precautions for Bluetooth product installation and operation: www.hytronik.com/download->knowledge->Bluetooth Products - Precautions for Product Installation and Operation
Data sheet subject to change without notice. Please always refer to the most recent release on: www.hytronik.com/products/bluetooth technology->Bluetooth Drivers
Regarding Hytronik standard guarantee policy: www.hytronik.com/download->knowledge->Hytronik Standard Guarantee Policy

	Hytronik HED8025/BT, HED8030/BT, HED8040/BT Bluetooth LED Drivers Datasheet Datasheet for Hytronik HED8025/BT, HED8030/BT, and HED8040/BT constant current Bluetooth 5.0 SIG Mesh LED drivers. Features include Switch-Dim, tunable white, app control via Koolmesh, and various protection mechanisms.
	Hytronik HED8025V/BT Bluetooth LED Driver Datasheet Technical specifications, features, and application notes for the Hytronik HED8025V/BT, a 25W Constant Voltage Bluetooth 5.0 SIG Mesh LED driver, designed for smart lighting applications.
	Hytronik HBTD8200VFC Bluetooth Voltage-free Contact Switch - Technical Specifications Detailed technical specifications, features, and installation information for the Hytronik HBTD8200VFC Bluetooth 5.0 SIG Mesh Voltage-free Contact Switch. Learn about its app and hardware features, electrical specifications, safety certifications, and wiring diagrams.
	Hytronik HC038V/BT & HCD038/BT Bluetooth Motion Sensors - Datasheet Detailed datasheet for Hytronik HC038V/BT (0/1-10V) and HCD038/BT (DALI) Bluetooth 5.0 SIG Mesh motion sensor control bases. Features include app control, various sensor head compatibility, and technical specifications for indoor lighting applications.
	Hytronik HBIR28/2CH Series PIR Motion Sensor Datasheet Detailed technical specifications, features, and detection patterns for the Hytronik HBIR28/2CH series of Bluetooth 5.0 SIG Mesh PIR standalone motion sensors, including low-bay and high-bay models.
	Hytronik DALI LED Drivers (With System Feedback) - HED Series Technical Overview This document provides a comprehensive technical overview of Hytronik's HED series DALI LED drivers, including models HED4030-A, HED6030-A, HED2075-A, and HED3075-A. It details their applications in various lighting scenarios, key features such as DALI feedback, 1-10V, and Switch-Dim control, technical specifications, dimensions, wiring diagrams, and performance characteristics like efficiency, power factor, and dimming curves.
	Hytronik HBIR29 Series PIR Standalone Motion Sensor with Bluetooth 5.0 SIG Mesh Detailed technical specifications, features, and installation guide for the Hytronik HBIR29 series of PIR standalone motion sensors. Covers various models including HBIR29, HBIR29/R, HBIR29/W, HBIR29/H, HBIR29/RH, and HBIR29/UH, highlighting their applications in low-bay, high-bay, and reinforced high-bay environments. Includes information on Bluetooth 5.0 SIG Mesh connectivity, DALI control, app features, hardware specifications, detection patterns, and installation accessories.
	Hytronik HC005S/BT Built-in Microwave Motion Sensor Installation Manual Comprehensive installation and instruction manual for the Hytronik HC005S/BT, a built-in microwave motion sensor with Bluetooth 5.0 SIG Mesh for ON/OFF control. Features technical specifications, app download, installation guide, and detection patterns.