Infinity X1 Motion Activated Under Cabinet Light

Instructions

Motion Activated Under Cabinet Light

Switch Function:

• Single-click for adjusting color temperature.
• Long-press for dimming.

Indicator Light: The indicator is red when charging and turns green when the unit is fully charged.

Remote Control:

• Power Switch: (1) X1 is for turning on; X2 is for turning off.
• Function Switch: Long press for 3 seconds to switch to the manual random rolling code linkable mode. To exit the manual code lock mode, long press the HOLD button for 15 seconds to return to the simple and convenient fixed code linkable mode.
• Light Function Modes:
• MODE ALL: Control Zone 1 and Zone 2
• MODE 1: Control Zone 1 Only
• MODE 2: Control Zone 2 Only

Linkable Switch: OFF - ZONE 1 - Zone 2

Motion Sensing Distance Adjustment Switch: (5ft 10ft 20ft OFF) / (1.5m 3m 6m OFF)

USB-IN: For charging battery.

Magnetic Area: The magnets on the back of the wall light attract the metal plate for installation.

Installation

1. Screw the expansion screw into the wall.
2. Align the hole of the metal plate with the expansion screw.
3. Fasten the metal plate to the wall with self-tapping screws.
4. Align the magnets located on the back of the wall light to attract the metal plate. Installation completed.
5. The metal plate can be fixed on a smooth surface with 3M sticker instead of screws.

Important Information and Precautions

CAUTION: Possible hazardous optical radiation emitted from this product. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1.57 m / 5.15 ft is not expected.

WARNING:

• Do not look directly into the light or shine the light into another person's eyes when it is illuminated.
• Do not disassemble the housing. There are no internal serviceable parts.
• This unit contains a rechargeable battery. Although this product arrives partially charged from the factory, it MUST be fully charged before the first use.
• Do not dismantle or open devices to access the built-in rechargeable battery. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. The battery needs to be charged before use.
• Store and use this product at room temperature.
• Do not expose this product to rain or damp surroundings.
• Do not dismantle, repair, or modify this product on your own.
• In order to avoid any risk, do not dispose of this product inappropriately or expose it to fire as there is a built-in, non-replaceable lithium battery.
• Working Temperature: -20 °C to 54 °C / -4 °F to 129.2 °F.
• FOR INDOOR USE

FCC Declaration: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Canadian Compliance: CAN ICES-005 (B) / NMB-005 (B). This Class B digital apparatus complies with Canadian ICES-005.

Manufacturer and Support

Manufacturer: ©2021 INFINITY X1 LLC, 3525 Del Mar Heights Rd, Suite 867, San Diego, CA 92130, USA. www.infinityx1.com

Customer Service:

• USA: 1-866-544-4891
• International: 1-760-230-5611
• Hours: M-F 9AM to 5PM Pacific Time
• Web: www.infinityx1.com/support
• Email: support@infinityx1.com

Distributed by:

• Costco Wholesale Corporation (USA, Canada, Mexico, UK, France, Iceland, Japan, Australia, New Zealand, Korea, Spain, Sweden, China)