About This Manual
This document serves as the owner's manual and replacement parts list for the COMFORT-AIRE CMA30SB-1 Horizontal/Side Discharge Condensing Unit.
For genuine replacement parts, visit Appliance Factory Parts or search for COMFORT-AIRE CMA30SB-1 parts.
You can also find COMFORT-AIRE HVAC parts for over 1486 models.
Exploded View
The following diagram illustrates the assembly of the COMFORT-AIRE CMA30SB-1 Inverter Mini-Splits condensing unit. Numbers correspond to the parts listed below.
The exploded view diagram shows the internal components of the COMFORT-AIRE CMA30SB-1 Horizontal/Side Discharge Condensing Unit. It is a detailed illustration with numbered parts that correspond to the replacement parts list. Key components visible include the front net assembly (11), front panel (12), axial flow fan (16) driven by an asynchronous motor (17), condenser assembly (3) with a rear net (2), top cover assembly (15), electronic control box assembly (23) containing an AC contactor (23.2) and capacitors (23.8, 23.9), compressor (28), liquid valve assembly (24), gas valve assembly (26), and discharge pipe assembly (27). Various supporting structures, panels, and fasteners are also depicted.
Replacement Parts List
This section details the replacement parts for the COMFORT-AIRE CMA30SB-1, manufactured by HEAT CONTROLLER.
Location | Part Name | Quantity | Part No. |
---|---|---|---|
2 | Rear net | 1 | 2011487G0001 |
3 | Condenser assembly | 1 | 201538190030 |
5 | Big handle assembly | 1 | 201237390104 |
6 | Rear right clapboard assembly | 1 | 201248700256 |
7 | Water collector | 1 | 201148790000 |
8 | Front right clapboard assembly | 1 | 201248700056 |
9 | Valve plate | 1 | 201248790014 |
10 | Chassis | 1 | 201275490085 |
11 | Front net assembly | 1 | 201248700055 |
12 | Front panel | 1 | 201248700072 |
13 | Clamp of front net | 10 | 201135110801 |
14 | Rear supporter | 1 | 2012487G0011 |
15 | Top cover assembly | 1 | 201257190096 |
16 | Axial flow fan | 1 | 201100300145 |
17 | Asynchronous motor | 1 | 202400401142 |
18 | Supporter assembly of fan motor | 1 | 201275590020 |
19 | Rear-left supporting board | 1 | 201248700262 |
20 | Partition board assembly | 1 | 201248700070 |
23 | Electronic control box assembly | 1 | 203338190119 |
23.2 | AC contactor | 1 | 202300850015 |
23.3 | Wire joint | 1 | 202301400063 |
23.3 | Wire joint | 1 | 202301450117 |
23.6 | Electronic installing plate | 1 | 201275590077 |
23.8 | Capacitor of compressor | 1 | 202401000075 |
23.8 | Capacitor of compressor | 1 | 202401000006 |
23.9 | Capacitor clip | 1 | 201200101040 |
23.9 | Capacitor clip | 1 | 201200100011 |
24 | Liquid valve assembly | 1 | 201638190568 |
24.1 | Liquid valve | 1 | 201600740704 |
26 | Gas valve assembly | 1 | 201638190569 |
26.1 | Gas valve | 1 | 201600720425 |
27 | Discharge pipe assembly | 1 | 201638190566 |
27.1 | Pressure switch | 1 | 202301820504 |
28 | Compressor | 1 | 201400600140 |
32 | Copper nut | 1 | 201600320004 |
32 | Copper nut | 1 | 201600320001 |
Important Information and Disclaimer
Due to ongoing product improvements, specifications and dimensions are subject to change and correction without notice or incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer. Additionally, the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Incentive and rebate programs have precise requirements as to product performance and certification. All products meet applicable regulations in effect on date of manufacture; however, certifications are not necessarily granted for the life of a product. Therefore, it is the responsibility of the applicant to determine whether a specific model qualifies for these incentive/rebate programs.