Comfort-Aire Hyper Heat Single Zone Air Handler & Condenser
Replacement Parts List
Model: A-VXP48SA-1
Exploded View
The exploded view diagram illustrates the various components of the air handler and condenser. Each part is numbered for easy identification in the replacement parts table.
Replacement Parts
| Location | Part Name | Quantity | Part No. |
|---|---|---|---|
| 1 | Left supporter | 1.0 | 12222000018386 |
| 1.1 | Small handle | 1.0 | 12100701000033 |
| 2 | Condenser assembly | 1.0 | 15823000007703 |
| 3 | Pipe temperature sensor subassembly | 1.0 | 11201007000124 |
| 4 | rear right side plate assembly | 1.0 | 12222500002932 |
| 4.1 | Handle | 1.0 | 12100702000170 |
| 5 | Cover plate subassembly | 1.0 | 12222000018396 |
| 6 | Water collector | 1.0 | 12122200002695 |
| 7 | front right side plate assembly | 1.0 | 12222000018406 |
| 7.1 | Handle | 1.0 | 12100702000170 |
| 8 | Accumulator cylinder | 1.0 | 15500508001515 |
| 9 | compressor | 1.0 | 11103020014061 |
| 10 | Partition board subassembly | 1.0 | 12222200008235 |
| 11 | Chassis assembly | 1.0 | 12222000020307 |
| 13 | Front panel | 1.0 | 12222000018392 |
| 13.1 | Air outlet grille | 1.0 | 12222000018393 |
| 14 | axial flow fan | 1.0 | 12100105001401 |
| 15 | Motor | 1.0 | 11002015018478 |
| 16 | Motor bracket assembly | 1.0 | 12222000018307 |
| 17 | Top cover assembly | 1.0 | 12222000018385 |
| 18 | Radiator | 1.0 | 15122000034103 |
| 19 | Electronic control box subassembly | 1.0 | 17222000044790 |
| 19.1 | Outdoor main control board subassembly | 1.0 | 17122000065032 |
| 20 | Electronic control box terminal board assembly | 1.0 | 17222300005000 |
| 20.1 | Terminal block | 1.0 | 17400401006516 |
| 20.2 | Electronic installing box subassembly | 1.0 | 12222000019085 |
| 20.2.1 | Holder for U-Typed Copper Pipe | 1.0 | 12122000033782 |
| 20.6 | Electronic installing box | 1.0 | 12122000035062 |
| 20.8 | Data Conversion Module Subassembly | 1.0 | 17122000064300 |
| 21 | 4-way valve assembly | 1.0 | 15422000026538 |
| 21.1 | Gas valve | 1.0 | 15500204000662 |
| 21.2 | 4-way valve | 1.0 | 15500216002483 |
| 21.3 | pressure sensor | 1.0 | 11201008001132 |
| 22 | High pressure valve assembly | 1.0 | 15422000026537 |
| 22.1 | High pressure valve | 1.0 | 15500204000665 |
| 22.2 | Valve plate | 1.0 | 12222200000611 |
| 24 | Copper nut | 1.0 | 15500406000010 |
| 24 | Copper nut | 1.0 | 15500406000008 |
| 25 | Rear Grille | 1.0 | 12222000017766 |
| 26 | Outdoor unit trademark | 1.0 | 16000201001228 |
| 28 | Cover of electronic control box | 1.0 | 12222000018405 |
| 31 | Suction pipe subassembly | 1.0 | 15122000035298 |
| 31.1 | Pressure switch | 1.0 | 17400516000848 |
| 32 | Discharge pipe subassembly | 1.0 | 15122000035341 |
| 32.1 | Pressure switch | 1.0 | 17400516000851 |
| 33 | Electronic expansion valve subassembly | 1.0 | 15422000026536 |
| 33.1 | Electronic expansion valve | 1.0 | 11501020000081 |
| 34 | Pipe temperature sensor subassembly | 1.0 | 11201007003447 |
| 38 | Crankcase electric heater | 1.0 | 17402001001059 |
| 39 | Electric heater of chassis | 1.0 | 17402002000466 |
| 47 | combination sensor | 1.0 | 11201011001107 |
| 52 | evaporator connecting pipe subassembly | 1.0 | 15123000012948 |
| 52 | evaporator connecting pipe subassembly | 1.0 | 15123000012887 |
Notes
Due to ongoing product improvements, specifications and dimensions are subject to change and correction without notice or incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer. Additionally, the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Incentive and rebate programs have precise requirements as to product performance and certification. All products meet applicable regulations in effect on date of manufacture; however, certifications are not necessarily granted for the life of a product. Therefore, it is the responsibility of the applicant to determine whether a specific model qualifies for these incentive/rebate programs.
MARS
