Assembly Instructions for Aminalife Side Board SB003
SKU Codes: N709P288888K, N709P288888D
Contact Email: hdteam@aminalife.com
Part List
| Part No. | Description (English) | Description (French) | Quantity |
|---|---|---|---|
| 1 | Top panel | Panneau supérieur | 1 pc |
| 2 | Bottom panel | Panneau inférieur | 1 pc |
| 3 | Side rail left | Rail latéral gauche | 1 pc |
| 4 | Side rail right | Rail latéral droit | 1 pc |
| 5 | Center panel small l | Panneau central petit l | 1 pc |
| 6 | Center leg | Pied central | 2 pcs |
| 7 | Bottom support front or back | Support inférieur avant ou arrière | 2 pcs |
| 8 | Center base c | Base centrale c | 1 pc |
| 9 | Center base l or r | Base centrale gauche ou droite | 2 pcs |
| 10 | Center panel small r | Panneau central petit r | 1 pc |
| 11 | Center panel | Panneau central | 1 pc |
| 12 | Front support right | Support avant droit | 2 pcs |
| 13 | Front support left | Support avant gauche | 2 pcs |
| 14 | Drawer side left | Côté tiroir gauche | 9 pcs |
| 15 | Drawer back | Face du tiroir | 6 pcs |
| 16 | Drawer bottom | Fond de tiroir | 6 pcs |
| 17 | Drawer bottom support | Support de fond de tiroir | 6 pcs |
| 18 | Drawer side r | Côté tiroir r | 9 pcs |
| 19 | Drawer face | Face du tiroir | 6 pcs |
| 20 | Small drawer back | Petit dos de tiroir | 3 pcs |
| 21 | Small drawer bottom | Petit fond de tiroir | 3 pcs |
| 22 | Drawer face | Face du tiroir | 3 pcs |
| 23 | Back panel l | Panneau arrière l | 1 pc |
| 25 | Back panel r | Panneau arrière r | 1 pc |
| 26 | Center back panel | Panneau arrière central | 2 pcs |
Hardware List
| Hardware ID | Description (English) | Description (French) | Quantity |
|---|---|---|---|
| A | Minifix bolt (24mm) | Boulon Minifix | 78 pcs |
| B | Housing (Ø 12mm x 10mm) | Boîtier | 78 pcs |
| C | Dowel (M6 x 30mm) | Goujon | 47 pcs |
| D | CSK Screw (M3.5 x 14mm) | VIS CSK | 112 pcs |
| E | CSK Screw (M4 x 38mm) | VIS CSK | 52 pcs |
| F | Drawer slide 2 way (300mm) | Glissière de tiroir | 9 SET |
| G | Unita screw (6x40mm) | Vis Unita | 2 pcs |
| H | Handle | Poignée | 9 pcs |
| I | Pan head screw (M4x8mm) | Vis à tête cylindrique | 9 pcs |
| J | STEEL NAIL (2x20mm) | Clou en acier | 42 pcs |
| K | Ameriwood anti tipping | Ameriwood anti-basculement | 2 set |
| L | Allen key (M4) | Clé Allen M4 | 1 pc |
Assembly Tools Required (Not included): Screwdriver, Hammer.
Assembly Steps
Step 1
Connect side rails (3, 4) to bottom panel (2) and bottom supports (7). Attach center legs (6) to the bottom panel (2). Connect center base pieces (8, 9, 10, 11) and center panel (13) to the side rails and bottom supports. Hardware A (Minifix bolts ?), B (Housing ⚙️), C (Dowels ?), and K (Allen key ?) are used.
Diagram shows the initial assembly of the main frame components, indicating where bolts and dowels are inserted to connect panels.
Step 2
Attach drawer slides (F ➡️) to the inner sides of side rails (3, 4) and center panels (11, 5, 10) using screws (D ?). Note the PUSH (▶️) / PULL (◀️) indicators on the slides.
Diagram shows attaching drawer slides to panels using screws, with close-ups highlighting the slide mechanism and orientation.
Step 3
Attach dowels (B ⚙️) to the ends of bottom supports (7). Insert these into corresponding holes on the bottom panel (2).
Diagram shows inserting dowels into the ends of bottom support pieces before connecting them to the main bottom panel.
Step 4
Attach center legs (6) to the bottom panel (2) using screws (G ?) and Allen key (L ?). Attach bottom supports (7) to the side panels (2) using screws (G ?) and Allen key (L ?).
Diagram illustrates attaching legs and bottom supports to the base panel using screws and an Allen key.
Step 5
Connect center base pieces (5, 8, 10) using dowels (E ?).
Diagram shows joining three central base components using dowels.
Step 6
Attach center base pieces (9) to the assembly from Step 5, connecting to parts 5, 8, and 10 using dowels (B ⚙️).
Diagram shows adding side base components to the central base assembly using dowels.
Step 7
Connect center panel (11) and center base pieces (9) using dowels (E ?).
Diagram shows connecting a central panel and side base pieces using dowels.
Step 8
Attach center base pieces (9) to the structure using dowels (E ?). Note that height is adjustable.
Diagram illustrates attaching more side base pieces to the main structure using dowels, indicating adjustable height.
Step 9
Attach center panel (13) to the assembly using dowels (E ?), connecting to parts 2, 7, and 9.
Diagram shows attaching a central support panel to the base and side components using dowels.
Step 10
Attach side panels (3) to the bottom panel (2) and center base pieces (9) using dowels (B ⚙️).
Diagram shows connecting a side panel to the base and central structure using dowels.
Step 11
Attach side panel (2) to the structure using dowels (B ⚙️).
Diagram shows attaching another side panel to the main assembly using dowels.
Step 12
Attach side panel (4) to the structure using dowels (B ⚙️).
Diagram shows attaching the final side panel to the main assembly using dowels.
Step 13
Attach the top panel (1) to the assembled frame using dowels (B ⚙️).
Diagram shows placing and securing the top panel onto the completed frame using dowels.
Step 14
Attach back panels (23, 25, 26) to the rear of the unit using steel nails (J ?) and screws (D ?).
Diagram illustrates attaching the back panels to the rear of the unit, showing the use of nails and screws.
Step 15
Assemble drawer sides (14) and drawer faces (22) using hardware A (Minifix bolts ?) and B (Housing ⚙️). Attach drawer back (17) to drawer sides (14) using hardware B (Housing ⚙️).
Diagram shows the initial assembly of drawer components, connecting sides to fronts and backs using specific hardware.
Step 16
Attach drawer slides (F ➡️) to the assembled drawer sides (14) and drawer bottoms (18) using hardware B (Housing ⚙️), C (Dowels ?), and D (CSK Screws ?). Note PUSH (▶️) / PULL (◀️) indicators.
Diagram shows attaching drawer slides to the drawer box components, indicating the correct orientation and hardware.
Step 17
Assemble drawer boxes. Connect drawer sides (14) to drawer faces (22) and drawer backs (20) using hardware E (CSK Screws ?), H (Handles), and I (Pan head screws ?).
Diagram shows the assembly of drawer boxes, connecting sides, fronts, and backs with handles and screws.
Step 18
Assemble drawer boxes. Connect drawer sides (14) to drawer backs (17) and drawer bottoms (19) using hardware B (Housing ⚙️), E (CSK Screws ?), H (Handles), and I (Pan head screws ?). Attach drawer fronts (15) to the drawer assembly.
Diagram shows the final assembly of drawer boxes, connecting all sides, bottoms, and fronts with appropriate hardware.
Step 19
Insert the assembled drawers into the main unit.
Diagram shows the completed side board with all drawers inserted.
Furniture Anti-Tipping Installation
This anti-tipping hardware (K) must be attached to a wall stud using the enclosed screws.
- After assembling the unit, place it against the wall where it will be permanently positioned.
- Place the bracket on top of the wardrobe as shown in the diagram.
- Use a pencil to mark through the screw hole in the bracket, where the bracket has to be attached to the wall.
- Move the cabinet away from the wall and secure the bracket to the wall at the marked position using a wall plug (?) that suits your wall surface.
- With the wall brackets in position, move the cabinet back to the wall.
- Then, using the supplied screws, secure the horizontal arm of the brackets to the top of the wardrobe.
Diagrams illustrate attaching brackets to the wall using screws and wall plugs, and then securing the furniture to the brackets. Text indicates "TIGHTEN THE SCREWS".
Manufacturer Information
Manufacturer: T.A. FURNITURE & PROJECTS SDN BHD
Address: Lot 267, Kawasan Perindustrian Bukit Pasir, Mukim Sungai Raya, 84300 Bukit Pasir, Muar, Johor Darul Takzim, Malaysia.
Manufacturing Date: October 2024
Meets ASTM F3096-23
