Manuals+

Keepsmile

User Manual

RGB Car LED Strip Lights

Package Includes

Item Quantity
Car Cigarette Lighter 1
LED Strip Light 4
Remote Control 1
Controller Box 1
Fuse/Screws/Cable Ties 1/8/8
Hook and Loop Tape 2
User Manual 1

Specifications

Voltage 12V
LED Chipset 5050 SMD
Light Color RGB
Length 4 X 23cm (4 X 0.75ft)
Power Supply Car Cigarette Lighter
Control Method App&Remote Control Box
Working Temperature -10°C -45°C (14°F- 113°F)

Installation

Installation Introduction

1. Preparation Before Installing

  • Unpack the box and check all items listed in the packing list.
  • Power on the strip lights and check whether they light up.

2. Installing Steps

  1. Wipe the installing surface to make sure it's clean and smooth.
  2. Install the cigarette lighter and control box in the central console.
  3. Peel off the protective film and stick the strip lights as indicated in the picture.
  4. Firmly press the strip from end to end and reinforce ends of the strip with zip ties and screws.
  5. Insert the cigarette lighter into the socket and press the button on it. The button will light on, indicating the strip light is powered on.
Diagram shows a car interior with two front seats. The driver's side depicts the steering wheel, foot rest area, and seat bottom. The passenger side shows the foot rest area and seat bottom. A central console area is depicted between the seats, where the cigarette lighter and control box are installed. Labels include: Foot Rest Area, Screw Fixing Hole, Steering wheel, Cigarette lighter, Main Driver, Passenger, Seat Bottom.

Installation Tips

Please clean the installation surface before installation. If the installation method of steps 2 to 3 cannot be installed firmly well, it is recommended to take the following method for reinforcement installation.

  1. Reinforcement with Screws: The mounting surfaces of hard plastic can be fixed with accessory screws.
    Diagram shows an LED strip with screw holes along its length. Two screws are shown positioned to attach the strip to a surface.
  2. Reinforcement with Velcro: We can use the velcro to stick to the surface of the wool material to make it stronger. (Glue the adhesive surface of the Velcro and the adhesive surface of the light strip together, and then glue the hook surface of the Velcro to the surface of the wool).
    Diagram illustrates attaching an LED strip using velcro. A mounting surface is shown. Numbered steps indicate attachment points: 1 on the left side of the LED strip, 2 on the right side, and 3 pointing upwards towards the mounting surface, suggesting the velcro attachment process. The LED strip is labeled.

Controller Box

Diagram of the controller box showing its top surface with several buttons and indicators. Labels point to: ON/OFF button, Static color button, Dynamic mode button, and Music mode button.

Remote Control

Diagram of the remote control with numbered buttons from 1 to 14. Key buttons include: Power (ON/OFF), Color selection (R, G, B, W, and a color wheel with 20 static colors), Mode selection (JUMP3, JUMP7, FADE3, FADE7, FLASH, AUTO), Speed/Brightness adjustment (V+, V-, QUICK, SLOW), and Timing buttons (1H, 2H, 3H, 4H). A note indicates to take it out before use.

Functions:

  1. Turn on
  2. Turn off
  3. Enhance (Brightness/Effect)
  4. Decreased mic sensitivity
  5. 20 static colors
  6. Timing button
  7. Adjust brightness button
  8. JUMP 3/ 7: 3/7 Colors Jump Change
  9. FADE3/ 7: 3/7 Colors Gradient
  10. Under These Modes (JUMP3, JUMP7, FADE3, FADES7, FLASH, and AUTO): Can Speed Up The Change (8 levels)
  11. Under These Modes (JUMP3, JUMP7, FADE3, FADES7, FLASH, and AUTO): Can Slow Down The Change (8 levels)
  12. JUMP3, JUMP7, FADE3, FADES7

Smart APP

To use the smart app:

  1. Scan the QR code or search "Keepsmile" to download the smart app.
  2. Open your phone Bluetooth to search for led lights devices. Device name format: KSxx-xxxxxx.
  3. Do not click the led lights device name directly; they will be connected automatically when you enter the APP.
  4. Enter the smart APP, click 'car light' to start your technology journey.

[Download on the App Store] [Get it on Google Play]

Customer Service

Models: KS-1213, RGB Car LED Strip Light, KS-1213 RGB Car LED Strip Light, LED Strip Light, Strip Light, Light

File Info : application/pdf, 6 Pages, 2.37MB

PDF preview unavailable. Download the PDF instead.

B1wo--GU9lL

References

Adobe PDF library 15.00 Adobe Illustrator(R) 17.0

Related Documents

Preview Keepsmile Modern Double Side Lighting Floor Lamp User Manual
User manual for the Keepsmile Modern Double Side Lighting Floor Lamp, covering installation, troubleshooting, control methods, specifications, and FCC compliance.
Preview keepsmile Smart LED Bulb User's Manual
Comprehensive user manual for the keepsmile Smart LED Bulb (A19 E26), detailing specifications, app control instructions, various lighting functions (color, scene, timer, group control), important safety warnings, and FCC compliance information. Optimize your smart home lighting experience.
Preview LED Ceiling Light User Manual and Installation Guide
Comprehensive user manual for the Keepsmile LED Ceiling Light (Model HX-XDD01), covering installation, troubleshooting, app control, and remote operation. Learn about product features, safety instructions, and technical specifications.