Zebra FXR90 Ultra-Rugged Fixed RFID Readers
Accessories Guide
January 2024
Power Supply Units
PWR-BGA24V90W0WW
Level VI AC/DC Power Supply Brick, IP67 Sealed. AC Input: 100-240V, 1.4A; Output: 24V, 3.75A, 90W, -40 to +65 Degrees C. Requires: Country specific grounded AC line cord.
PWR-BGA24V78W3WW
Level VI AC/DC Power Supply Brick, Unsealed. AC Input: 90-264V, 3A; Output: 24V, 3.25A, 78W, -20 TO +55 Degrees C. Requires: Country specific grounded AC line cord.
PWR-BGA24V90W1WW
DC/DC Power Supply Brick, IP67 Sealed. DC Input: 9-60V, 17.2A; Output: 24V, 3.75A, 90W, -40 TO +65 Degrees C.
PSU to Reader Power Cables
CBL-PWRD035-M12M12
M12 to M12 DC Output Line Cord, 3.5 meter. Requires PWR-BGA24V90W0WW or PWR-BGA24V90W1WW power supply.
CBL-PWRD100-M12M12
M12 to M12 DC Output Line Cord, 10 meter. Requires PWR-BGA24V90W0WW or PWR-BGA24V90W1WW power supply.
IP67 Sealed AC/DC PSU to Source Power Cables
Cables for PWR-BGA24V90W0WW
CBL-PWRA150-M1200
M12 to Flying Leads, AC Input Line Cord, 15 meter. Requires PWR-BGA24V90W0WW and either CBL-PWRD035-M12M12 or CBL-PWRD100-M12M12.
CBL-PWRA035-M12IEC
M12 to IEC Plug, AC Input Line Cord, 3.5 meter. Requires PWR-BGA24V90W0WW, either CBL-PWRD035-M12M12 or CBL-PWRD100-M12M12, and country specific grounded AC line cord.
IP67 Sealed DC/DC PSU to Source Power Cables
Cables for PWR-BGA24V90W1WW
CBL-PWRD150-M1200
M12 to Flying Leads, DC Input Line Cord, 15 meter. Requires PWR-BGA24V90W1WW. For use with 9-60VDC source.
Reader Direct to Source Power Cables (No PSU Required)
Power source must provide conditioned power.
CBL-PWRD035-M12CL
M12 to 12V Auto Auxiliary Power Outlet Adaptor (Cigarette Lighter), 3.5 meter. No power supply required.
CBL-PWRD035-M1200
M12 to Flying Leads, DC Power Cord, 3.5 meter. No power supply required. For use with 12-24VDC source.
CBL-PWRD100-M1200
M12 to Flying Leads, DC Power Cord, 10 meter. No power supply required. For use with 12-24VDC source.
Reader Accessories Diagram
The FXR90 reader features multiple ports for various accessories. The following accessories are available:
- USB Splitter: ADP-USB0010-M12 - Splits the FXR90's USB port to one M12 USB host and one USB client port. It's an M12 Male to 3x M12 Female connector, providing two USB host and one USB client port.
- M12 USB Host Cables:
- CBL-USBCHST015-M12: M12 to USB-C Female Receptacle Host Cable, 1.5 meter.
- CBL-USBCHST035-M12: M12 to USB-C Female Receptacle Host Cable, 3.5 meter.
- M12 USB Client Cables (USB-C):
- CBL-USBCCLT015-M12: M12 to USB-C Male Client Cable, 1.5 meter.
- CBL-USBCCLT035-M12: M12 to USB-C Male Client Cable, 3.5 meter.
- M12 USB Client Cables (USB-A):
- CBL-USBACLT015-M12: M12 to USB-A Male Client Cable, 1.5 meter.
- CBL-USBACLT035-M12: M12 to USB-A Male Client Cable, 3.5 meter.
- General Purpose Input/Output (GPIO) Cables:
- CBL-GP0050-M12M12A: M12 to M12 A-Coded Male GPIO Accessory Cable, 5 meter.
- CBL-GP1050-M12M12A: M12 to M12 A-Coded Male GPIO Accessory Cable, M12 GPIO Power Input, 5 meter. Requires Any FXR90 Power Supply and Supporting Cables.
- General Purpose Input/Output (GPIO) Breakout Box:
- BLOK-M12PN-01: GPIO NPN Breakout Block for use with FXR90. Features 12-Pin M12 GPIO/DC Power Input CONNECTOR, 4x M8 3-Pin GP Inputs, 4x M8 3-Pin GP Outputs.
- FWP-IOPLUGM-M8: Field-Wireable M8 I/O Plug 3-Pin Male for use with BLOK-M12PN-01 Breakout Box.
- Ethernet Cables:
- CBL-ENT00101-M1200: M12X to RJ45 Ethernet Cable, 1m.
- CBL-ENT00301-M1200: M12X to RJ45 Ethernet Cable, 3m.
- CBL-ENT00500-M1200: M12X to RJ45 Ethernet Cable, 5m.
- CBL-ENT01501-M1200: M12X to RJ45 Ethernet Cable, 15m.
- RP-TNC to SMA RF Antenna Cables:
- CBLRD-1C4000600R: 60" LMR-240, RP-TNC STR Plug to SMA STR Plug, IP67 Sealed.
- CBLRD-1C4001200R: 120" LMR-240, RP-TNC STR Plug to SMA STR Plug, IP67 Sealed.
- CBLRD-1C4001800R: 180" LMR-240, RP-TNC STR Plug to SMA STR Plug, IP67 Sealed.
- CBLRD-1C4002400R: 240" LMR-240, RP-TNC STR Plug to SMA STR Plug, IP67 Sealed.
- CBLRD-1C4003600R: 360" LMR-240, RP-TNC STR Plug to SMA STR Plug, IP67 Sealed.
- RP-TNC to Type N RF Antenna Cables:
- CBLRD-1B4000680R: 68" LMR-240, RP-TNC STR Plug to N 90 Degree Plug.
- CBLRD-1B4001800R: 180" (15') LMR-240, RP-TNC STR Plug to N 90 Degree Plug.
- CBLRD-1B4002400R: 240" (20') LMR-240, RP-TNC STR Plug to N 90 Degree Plug.
- CBLRD-1B4003600R: 360" (30') LMR-240, RP-TNC STR Plug to N 90 Degree Plug.
- RP-TNC to Type N RF Antenna Cables (IP67 Sealed):
- CBLRD-3B4000680R: 68" LMR-240, RP-TNC STR Plug to N STR Plug, IP67 Sealed.
- CBLRD-3B4001800R: 180" (15') LMR-240, RP-TNC STR Plug to N STR Plug, IP67 Sealed.
- CBLRD-3B4002400R: 240" (20') LMR-240, RP-TNC STR Plug to N STR Plug, IP67 Sealed.
- CBLRD-3B4003600R: 360" (30') LMR-240, RP-TNC STR Plug to N STR Plug, IP67 Sealed.
- Wi-Fi and Cellular/GPS Antennas:
- ANT-WLANIP6-90SMA: Articulating Outdoor IP67 Sealed WLAN Antenna, 124 mm, SMA Connector.
- ANT-WLANIP0-90SMA: Articulating Indoor WLAN Antenna, 109 mm, SMA Connector.
- ANT-4G5GGPS010-SMA: FXR90 4G/5G/GPS Antenna, 1 Meter Cable, 4x SMA Male Connectors, Black. *Required for Cellular and/or GPS operation.
Reader Power Supply Diagram
The diagram illustrates the connectivity between various power supply units and the FXR90 reader. It shows that the PWR-BGA24V90W0WW can be connected via CBL-PWRD035-M12M12 or CBL-PWRD100-M12M12, and also via CBL-PWRA150-M1200 or CBL-PWRA035-M12IEC (which requires a country-specific line cord). The PWR-BGA24V90W1WW can be connected via CBL-PWRD035-M12M12 or CBL-PWRD100-M12M12, and also via CBL-PWRD150-M1200. Additionally, direct-to-source cables like CBL-PWRD035-M12CL, CBL-PWRD035-M1200, and CBL-PWRD100-M1200 are shown connecting directly to the reader, bypassing a PSU.
Mounting Hardware and Adaptor Plate
MNT-100100MM-01
Heavy Duty 100 x 100mm VESA Mount (Wall or Pole).
ADP-200100MM-01
Heavy Duty Adaptor Plate. Converts 100 x 100mm VESA Mount to 200 x 100mm. For use with MNT-100100MM-01.
