FAKRO ARF/ARP NE WIFI TUYA Electric Roller Blind
Brand: FAKRO
Product Models: ARF NE WIFI TUYA, ARP NE WIFI TUYA
Product Overview
The FAKRO ARF, ARP NE WIFI TUYA electric roller blind offers maximum comfort for attic living spaces. It can be controlled via a smartphone application, either locally or from anywhere in the world. Users can set preferred positions, create operating schedules, and monitor the device's status. The system allows for sharing access with other household members.
Technical Parameters
| Parameter | Value |
|---|---|
| Power Supply | 15V DC |
| Rated Power | 10W |
| Operating Temperature | 0-80°C |
| Sound Pressure Emission Level | Lpa ≤ 70dB |
| Radio Protocol | WiFi |
| Radio Frequency | 2.4 GHz |
| Range | up to 20m indoors |
Important Information & Safety
Please read this manual carefully before installation to prevent electric shock, injury, or other hazards.
- Upon unpacking, verify the device's correct operation. Connect the device to a 15VDC power supply (sold separately). Operate the device using the manual control button.
- Install the device according to the installation instructions.
- Connect the device to a low-voltage installation following the provided diagram. Installation should be performed by a qualified person according to the manufacturer's instructions. Verify correct operation with a single cycle using the manual control button.
- Add the device to the application following the programming instructions (see page 5).
- The device should be used as intended.
- The device is equipped with mechanical limit stops and overload protection to prevent damage if it encounters an obstacle. The mechanical limit stops are factory-set.
- The product operates on the 2.4 GHz frequency. 2.4 GHz and 5 GHz networks cannot be broadcast under the same name.
Wiring Diagram and Connection
Connect the roller blind to a ZZ60h or ZZ60 power supply. A single power supply can connect up to 4 ARF, ARP NE WIFI TUYA roller blinds. The power supply must be purchased separately. For ARF, ARP NE WIFI TUYA blinds, the AKZ connection set is also required.
[Diagram Description: The diagram illustrates the connection of the roller blind to a ZZ60h or ZZ60 power supply unit. It shows AC input terminals (Live, Neutral) and DC output terminals (Positive, Negative) connecting to the blind. Color coding for wires is indicated: Blue for Neutral, Brown for Live, Red for DC Positive, and Black for DC Negative.]
Control Panel and Functions
The control panel features a single button for operation.
Basic Functions:
Press button once (x1): Manual control.
Hold button for 5 seconds (5s): Enter AP (Access Point) programming mode.
Signaling:
Red LED blinks 1 time (x1): Reached upper limit position.
Red LED blinks 3 times (x3): Reached lower limit position. Overload.
Blind lights up after power reset: Unconfirmed upper limit position. The LED blinks until the reference position is reached.
Manual Control
Operate the device by pressing the button:
- Start: Press button.
- Stop: Press button again.
- Start in reverse direction: Press button again.
[Diagram Description: Depicts manual operation: a single button press initiates 'Start', a subsequent press stops it ('Stop'), and another press starts it in the reverse direction.]
WiFi Compatibility
WiFi enables integration of various smart home devices such as lighting, heating, and automation systems. This product can be operated on any WiFi network, provided a router with internet access is available. For information on adding devices to WiFi networks, refer to the respective device manuals. This product is compatible with the Tuya Smart and Smart Life applications.
Declaration of Conformity (DoC)
FAKRO Sp. z o.o. hereby declares that the radio equipment type ARF NE WIFI TUYA, ARP NE WIFI TUYA complies with Directive RED 2014/53/UE. The full text of the EU declaration of conformity is available at: https://www.fakro.com/ce-declarations/search/
WEEE Compliance
The symbol [WEEE Recycling Symbol] indicates that this device should not be disposed of with household waste. Users are obligated to deliver their used devices to designated recycling points.
Quick Start Guide
Download FAKRO smartHome App
Download the FAKRO smartHome application using the QR code or install it from the Google Play Store or App Store.
[QR Code for Android App] [QR Code for iOS App]
Follow the installer's instructions. The app shortcut will be added to your home screen.
FAKRO smartHome Instructions
Scan the QR code to access the FAKRO smartHome application instructions.
[QR Code for FAKRO smartHome Instructions]
Note: The ARF, ARP NE WIFI TUYA roller blind is factory calibrated. Recalibration can be performed from the application settings.
Warranty
Warranty Information:
Device:
Model:
Serial Number:
Seller:
Address:
Date of Purchase:
Invoice Number:
Installer's Signature (Stamp):
For warranty and service information, please visit:
FAKRO Sp. z o.o.
ul. Węgierska 144A, 33-300 Nowy Sącz, Poland
Tel: +48 18 4440444, Fax: +48 18 4440333
Website: www.fakro.com
