Aobosi Wine & Beverage Cooler
Instruction Manual
Model: YC120-2D
A line drawing depicts a dual-door wine and beverage cooler with glass doors and visible shelving.
Important Safegides
Thanks for choosing our products, hope that our products can bring you different feelings. Please read the following safety and operating instructions carefully before using the wine cooler.
- Plug into a grounded 3-prong outlet; do not remove the grounding prong, do not use an adapter, and do not use an extension cord.
- Read all instructions before using the wine chiller.
- Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous.
- Before you throw away your old wine chiller, take off the door but leave the shelves in place so that children may not easily climb inside.
- Never allow children to operate, play with, or crawl inside the appliance.
- Replace all panels before operating.
- It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
- Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
- Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
- Do not connect or disconnect the electric plug when your hands are wet.
- Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
- Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.
- Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
- To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 16°C (60.8°F) and below 32°C (89.6°F). This unit must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
- The appliance should not be located next to ovens, grills or other sources of high heat.
- The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply, properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
- Do not kink or pinch the power supply cord of appliance.
- The fuse (or circuit breaker) size should be 13 amperes.
- Never allow children to operate, play with or crawl inside the appliance.
- Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.
- Do not use this apparatus for other than its intended purpose.
- Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance.
⚠️ Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance.
- It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
- Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
- Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
- Do not connect or disconnect the electric plug when your hands are wet.
- Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
- DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing.
- To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.
- Consult repair manual / owner's guide before attempting to service this product. All safety precautions must be followed.
- To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of the cooler.
? WARNING To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:
- Read all instructions before using the wine chiller.
- DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous.
- Before you throw away your old wine chiller, take off the door but leave the shelves in place so that children may not easily climb inside.
- Never allow children to operate, play with, or crawl inside the appliance.
- Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
- Do not store or use gasoline or any other flammable vapours and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
-Save these instructions-
Extension Cord: Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Product Features
- Dual cooling zones for storing different beverages and wines together.
- Beverage Refrigerator (Left Zone) Capacity: 57 standard 12oz cans
- Wine Refrigerator (Right Zone) Capacity: 18 standard 750ml wine bottles
- Stainless steel glass doors with sleek black cabinet
- Stainless steel handle
- Tempered double-layered glass door with stainless steel frame
- Adjustable temperature for both zones
- Soft Blue Interior Lights
- Fahrenheit and Celsius degree optional temperature indicators
- 3 removable wire shelves - Beverage Refrigerator (Left Zone)
- 6 removable wooden shelves - Wine Refrigerator (Right Zone)
Installation
Before the first use
- Remove the exterior and interior packing materials.
- It is important for the appliance to be leveled in order to work properly. You may need to adjust the feet to make it level.
- Let the appliance stand upright for approximately 24 hours before connecting it to the power source, which helps to reduce the possibility of a cooling-system malfunction from handling during transportation.
- Use a soft cloth to clean the interior surface with lukewarm water.
Door handle installation
Describe the door handle installation process:
1. Pull away the sealing gasket where the handle is to be installed. The gasket is easily displaced by hand; no tools are necessary.
2. Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver until the handle sets both flush and secured tightly against the door frame. Do not overtighten as this will cause damage to the handle assembly.
3. Install the sealing gasket to its original position.
Diagrams show the handle attachment points and the use of screws and a Phillips screwdriver.
Built-in installation
These appliances are designed for both built-in or free-standing installation. For built-in installation, ensure proper service access and ventilation, allow at least 1¼" (6.35mm) space on each side and at the top.
Diagrams show the appliance dimensions: Front view (width 615mm, height 870mm, depth 595mm), Side view (height 575mm, clearance 30mm), and Top view (height 575mm, clearance 15mm).
Operating the Appliance
Control Panel
The control panel features the following:
- 1: Lighting button: Turns the interior LED lighting on or off.
- 2: Temperature up: Increases the temperature setting for the selected zone.
- 3: Display window: Shows the current temperature.
- 4: Fahrenheit and Celsius indicate light: Indicates the selected temperature unit (°F or °C).
- 5: Temperature down: Decreases the temperature setting for the selected zone.
- 6: Fahrenheit & Celsius switch button: Toggles between Fahrenheit and Celsius temperature units.
- 7: Power button: Turns the appliance on or off.
Power On/Off
- When the appliance is plugged into a power outlet, it powers on automatically.
- Touch the power button to turn on the appliance. Press and hold the power button for 3 seconds to turn off the appliance if needed.
Light Control
- Touch the lighting button to turn on (or turn off) the interior cool LED lighting.
- The light will automatically turn off 10 minutes later for energy saving.
- Note: To keep the light staying on always, press the lighting button until you hear 2 "beeps".
Set Temperature
Touch the ▲ (Temperature Up) or ▼ (Temperature Down) button to increase or decrease the temperature of the selected zone. The temperature will increase 1°F or 1°C if you touch the button once; conversely, the temperature will decrease 1°F or 1°C if you touch the button once.
Cooling Zone | Temperature Range |
---|---|
Beverage Refrigerator (Left Zone) | 2°C-10°C (35.6°F-50°F) |
Wine Refrigerator (Right Zone) | 5°C-18°C (41°F-64.4°F) |
Note:
- If the appliance loses power suddenly, please turn it on again after 3-5 minutes. The temperature setting has an automatic memory function.
- This wine cooler is suitable for an ambient temperature of 5-32°C (41-89.6°F). If the ambient temperature is higher or lower than this range, the performance may be affected.
- If it is the first time to use this appliance, it is normal for the preset temperature and display temperature to differ initially. The display will return to normal after a few hours of operation.
Shelf Removal
- To avoid damage to the door sealing, please open the door fully when sliding out the shelves.
- For convenience, you can pull out a shelf by 1/3. The product is designed with shelf holders to prevent the shelf from tipping over and falling out of the cabinet.
- If you need to remove a shelf completely, pull the shelf out to the position where the notch of the shelf is exactly under the plastic post, then lift it up and out. A diagram illustrates this process.
Storage
Diagrams illustrate the arrangement of bottles and cans on shelves.
Beverage Cooler Zone
- Shelf one to two: 18 standard 12oz cans per shelf
- Shelf Three: 9 standard 12oz cans per shelf
- Bottom Section: 12 standard 12oz cans
Wine Cooler Zone
- Shelf One to Five: 3 standard 750ml bottles per shelf
- Bottom Section: 3 standard 750ml bottles
Care and Maintenance
Cleaning your wine cooler
- Turn off the power, unplug the appliance, and remove all items including shelves.
- Wash the inside surfaces with a warm water and soft cloth.
- Wash the shelves with a mild detergent solution.
- Wring excess water out of the sponge or cloth when cleaning the area of the controls, or any electrical parts.
- Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. Do not use steel wool or steel brush on the stainless steel, as these can contaminate the stainless steel with steel particles and cause rusting.
Power failure
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.
Moving your wine chiller
- Remove all items (bottles).
- Tape down securely all loose items (shelves) inside your appliance.
- Turn the adjustable leg up to the base to avoid damage.
- Tape the door shut. Be sure the appliance stays secure in the upright position during transportation. If you absolutely need to transport the chiller horizontally, transport the chiller on its back (door on top). Also protect the outside of the appliance with a blanket, or similar item.
Energy saving tips
- The wine chiller should be located in the coolest area of the room, away from heat-producing appliances, and out of direct sunlight.
Troubleshooting Guide
You can solve many common wine chiller problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service.
PROBLEM | POSSIBLE CAUSE |
---|---|
Wine cooler does not operate. | Not plugged in. The appliance is turned off. The circuit breaker tripped or a blown fuse. |
Wine cooler is not cold enough. | External environment may require a higher setting. The door is opened too often. The door is not closed completely. The door gasket does not seal properly. |
The compressor turns on and off frequently. | The room temperature is hotter than normal. A lot of bottles has been added to the chiller. The door is opened too often. The door is not closed completely. The temperature control is not set correctly. The door gasket does not seal properly. |
The light does not work | Not plugged in. The circuit breaker tripped or a blown fuse. The light button is "OFF". |
Vibrations. | The chiller is not leveled. The bottles are vibrating. There is an object under the chiller. |
The chiller seems to make too much noise. | The flow of refrigerant is normal. The circulation of the refrigeration. The chiller is not level. |
The door will not close properly. | The chiller is not level. The door was reversed and not properly installed. The gasket is dirty. The shelves are out of position. |
Technical Specification
Wine & Beverage Cooler | YC120-2D |
Total Volume | 4.24Cu.Ft. |
Power | 115V~60Hz |
Amps | 1A |
Start-Up Amps | 10A |
Power Input | 100W |
Pressure High Side | 105 PSI |
Pressure Low Side | 55 PSI |
Refrigerant | R600a |
Amount | 1.06 oz. |
Dimensions(HxWxD) | 34.25"x23.43"x22.64" |
Warranty
Thank you for choosing AOBOSI product. We sincerely hope that you are satisfied with it.
The manufacturer's warranty covers the product for a period of 12 months from the date of purchase against manufacturing faults. All warranties are automatically kept track of in our system, so there is no need to register your product.
Agent/Distributor is welcome to contact us. Email: info@iaobosi.com.
For any help or questions during use, please contact us via website www.iaobosi.com, send an email to info@iaobosi.com, or scan our related QR Codes herein for quick service. We will service you within 24 hours. We suggest providing a warranty card, a photo, or a video if there is a broken spare part or a non-working machine, so that we can better understand your problems and offer the best solution.
Please fill in the warranty card table and email it within 10 days from the date of purchase.
A template for the Aobosi Warranty Card is provided, including fields for Item name, Model, Serial No., Store name, Purchase date, Buyer's name, Email, Address, and Tel.