Quick Start Guide

1. Connect to PC

Connect the webcam to your computer via USB.

Diagram: Shows a webcam connected to a laptop via a USB cable.

2. Setting up the webcam

Follow the on-screen instructions or the diagrams to set up the webcam.

Diagram: Two diagrams showing how to position the webcam on a monitor or other surface.

3. Remove the privacy cover

Remove the protective cover from the webcam lens.

Diagram: Two diagrams illustrating the removal of the privacy cover.

4. Mount to tripod

Mount the webcam to a tripod for stable positioning. (Tripod sold separately)

Diagram: Shows the webcam being attached to a tripod.

5. eMeetLink (Windows & macOS)

Download and install the eMeetLink software from www.emeet.com for image adjustment and other features.

Diagram: A computer screen displaying the eMeetLink software interface.

Website: www.emeet.com

Safety Guide

Caution:

• Do not open the housing of the product to avoid electrical shock.
• Do not use the product's internal parts.
• For repairs, contact qualified maintenance personnel or the after-sales department.
• Read and keep this guide.
• Observe all warnings and follow all instructions.
• Clean the product with a dry cloth only.
• Choking hazard: Contains small parts. Not suitable for children under 3 years old.
• Do not place near heat sources.
• Do not use while alertness is required (e.g., driving, cycling).
• Do not submerge in water or expose to damp environments. Do not use during water sports.
• Protect the USB cable; do not step on it, apply pressure, or pull it.
• Use only specified accessories.
• When not in use, unplug the device and turn off the power.
• Contact professional maintenance personnel for repairs. If the product is damaged (e.g., damaged cable, liquid ingress, object inside, water/moisture exposure, drops), it needs to be repaired.

EU/UKCA Compliance

SHENZHEN EMEET TECHNOLOGY CO., LTD. declares that the equipment complies with Directive 2014/30/EU / EMCR 2016 (S.I. 2016/1091).

• Suitable temperature for product and accessories: 0~40 ℃.
• Product shall only be connected to a USB Interface of version 2.0 or higher.

ISED Canada compliance:

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC Compliance:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.

Warranty Information

EMEET offers a limited two (2) year warranty with proof of purchase. The warranty does not cover normal wear and tear or damage caused by accidents or misuse. Keep your proof of purchase for service.

RoHS Statement

This table indicates the presence of restricted substances in the product's components. The symbols indicate compliance with RoHS regulations.

Table: Lists components and their compliance status for Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). 'O' indicates compliance, '-' indicates exemption.