JBL Vibe Beam Quick Start Guide
Your guide to wireless audio freedom.
What's in the Box
- JBL Vibe Beam Earbuds ?
- Charging Case ?
- Ear Tips (S/M/L) ?
- USB Charging Cable ?
- Quick Start Guide
JBL Headphones App
Get even more control and personalization of your listening experience with this free app. Available on Google Play and the App Store.
[Link to Google Play] [Link to App Store]
How to Wear
Try different ear tip sizes (S/M/L) for a perfect fit and optimal audio performance. Ensure a secure fit for best results.
First Time Use
Follow these steps for initial setup and connection.
Power On & Connect
- Open the charging case to power on the earbuds.
- On your device, navigate to Bluetooth settings ?.
- Select "JBL VIBE BEAM" to connect.
- For Android 6.0+, tap to pair; the device will be linked to your Google Account (Fast Pair).
Dual Connect
Stereo Mode: Use both Left (L) and Right (R) earbuds for immersive sound.
Mono Mode: Use either the Left (L) or Right (R) earbud independently.
Controls
Control your audio and calls with intuitive touch gestures:
Left Earbud (L):
- Tap x1: Volume Up ?➕
- Tap x2: Previous Track ⏪
- Tap x3: [Function varies by app/setting]
- Hold (2s): Activate Bixby/Siri/Others ?️
Right Earbud (R):
- Tap x1: Play/Pause ▶️⏸️, Answer/End Call ?
- Tap x2: Next Track ⏩
- Tap x3: [Function varies by app/setting]
- Hold (2s): Activate Bixby/Siri/Others ?️
* Enable advanced controls and customize gestures by connecting your JBL VIBE BEAM to the JBL Headphones App.
VoiceAware
Adjust the level of ambient sound you hear while using the earbuds.
Power Off
Place the earbuds back into the charging case ? to power them off.
Manual Setup
Connect to a new Bluetooth device: Follow the standard Bluetooth pairing procedure ?.
Factory Reset: Reset your earbuds to factory default settings.
Do More With The App
Explore features like Ambient Sound Control (Ambient Aware, TalkThru), customizable gestures, and equalizer settings within the JBL Headphones App.
Charging
Earbuds: Place earbuds in the charging case ?. The case LED will indicate charging status.
Charging Case: Connect the case to a power source using the USB cable ?.
Quick Charge: 10 minutes of charging provides approximately 2 hours of playback.
LED Behaviors
Earbuds:
- White (Solid): Charging
- White (Off): Fully Charged
Bluetooth Connection:
- Blue (Flashing): BT Connecting
- Blue (Solid): BT Connected
- Blue (Off): BT Not Connected
Charging Case Battery Level:
- Red: Low
- Orange: Mid
- Green: High
Case Charging Status: Red-Orange-Green (Charging), Off (Fully Charged).
Technical Specifications
| Model: | VIBE BEAM |
| Driver size: | 8 mm/ 0.315" Dynamic Driver |
| Power supply: | 5V 1A |
| Earbud: | 4.4 g per pc (8.8 g combined)/ 0.0097 lbs per pc (0.0194 lbs combined) |
| Charging case: | 39.5 g/0.0871 lbs |
| Earbud battery type: | Lithium-ion polymer (48 mAh/ 3.85 V) |
| Charging case battery type: | Lithium-ion polymer (530 mAh/ 3.7 V) |
| Charging time: | <2 hrs from empty |
| Music playtime with BT on: | 8 hrs |
| Talk time: | 4.5 hrs |
| Frequency response: | 20 Hz 20 kHz |
| Impedance: | 16 ohm |
| Sensitivity: | 100 dB SPL@1 kHz |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | -38 dBV/Pa@1 kHz |
| Bluetooth version: | 5.2 |
| Bluetooth profile version: | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Bluetooth transmitter frequency range: | 2.4 GHz - 2.4835 GHz |
| Bluetooth transmitter power: | <15 dBm |
| Bluetooth transmitter modulation: | GFSK, π/4-DQPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
Battery Care
To prolong battery lifespan, fully charge at least once every 3 months. Battery life varies by use and settings.
Compliance & Safety
This equipment complies with Directive 2014/53/EU radiation exposure limits. The portable device meets radio wave exposure requirements set by the European Union. Use only the supplied or approved antenna.
Warning ⚠️: Do not attempt to open, service, or disassemble the battery. Do not short circuit. May explode if disposed of in fire. Risk of explosion if battery is replaced by an incorrect type. Dispose or recycle used batteries according to instructions.
FCC ID: APIJBLVBEAM, HVIN: VBEAML, VBEAMR
IC: 6132A-JBLVBEAM
Manufacturer Information
Manufacturer: Harman International Industries, Incorporated, USA.
Importer: ООО “ХАРМАН РУС СиАйЭс“, Russia.
Warranty Period: 1 year. Service Life: 2 years.
For service centers and technical support, visit www.harman.com/ru or call 8 (800) 700 0467.
