MADESJÖ Self-Adhesive Mirror

Important Note: The surface may be damaged when removing the mirror from the wall.

General Fixing Guidelines:

• The mirror adheres to most even surfaces.
• Fixing mirrors to ceilings and sloping ceilings is not recommended.
• The mirror can be used in bathrooms, but should not be fixed where it comes into direct contact with water, as water may damage the adhesive.

Surface Preparation and Adhesion Improvement:

• On porous surfaces like plywood and fibreboard, adhesion can be improved if the surface is first coated with high-gloss lacquer.
• Wipe the wall surface so that it is clean and dry before fixing the mirror.
• Wipe the back of the mirror so that it is clean and dry before sticking the tape on it.

Application and Removal:

• Position and fix the tape according to the illustration in the assembly instruction.
• Remember to position and fix the mirror correctly from the start, since the tape cannot be reused.
• The mirror may break when removing it from the wall. Be careful.