HD10C Barcode Reader User Manual

Published by HDWR

Introduction

This manual provides instructions for the HD10C Barcode Reader with Stand.

Specifications

Light Source: 620nm LED
Sensor Type: CMOS
Scanning method: manual (on the button) / automatically (after bringing the code closer)
Scan Acknowledgement: Light and Sound Signal
Read Rate: 200 times/second
Interface: USB
Cord length: 140 cm
Ingress protection: IP54
Device dimensions: 16 x 9.5 x 6.5 cm
Stand dimensions: 24 x 12 x 12 cm
Package dimensions: 18.5 x 12 x 8.5 cm
Device weight: 300 g
Weight with packaging: 370 g
Operating temperature: – 20 – 50°C
Storage temperature: -40 – 60°C
Readable 1D codes: EAN-8, EAN-13, UPC-A, UPC-E, CODE 128, CODE 39, CODE 93, CODE 11, CHINESE 2 of 5, CODABAR, MSI, Interleaved 2 of 5 (ITF), other one-dimensional

What's Included

Barcode Reader
Self-assembly reader stand
Built-in USB communication cable
Manual

Features

Wired reader for scanning standard barcodes
Ability to scan codes displayed on LCD and LED/OLED screens as well as mobile device displays
Barcode scanning in automatic mode
Any character before or after the code can be programmed

Configuration

Factory Reset

Scan the barcode below to restore default settings.

[Barcode for 'Restore default settings']

Code Scan Modes

Manual mode

[Barcode for 'Manual mode']

Auto mode

[Barcode for 'Auto mode']

Beep Settings

Sound On (Default)

[Barcode for 'Sound On (Default)']

Sound off

[Barcode for 'Sound off']

Setting End Characters

CR [Barcode for 'CR']	No signs [Barcode for 'No signs']
TAB [Barcode for 'TAB']	LF+CR [Barcode for 'LF+CR']

Case Settings

Uppercase and lowercase letters [Barcode for 'Uppercase and lowercase letters']	No case conversion [Barcode for 'No case conversion']
Uppercase letters only [Barcode for 'Uppercase letters only']	Lowercase only [Barcode for 'Lowercase only']

Reading Inverted Codes (on black background)

Enabled

[Barcode for 'Enabled']

Disabled (default)

[Barcode for 'Disabled (default)']

Adding a Prefix and Suffix

Add a prefix [Barcode for 'Add a prefix']	Add a suffix [Barcode for 'Add a suffix']
Cancel prefix [Barcode for 'Cancel prefix']	Cancel Suffix [Barcode for 'Cancel Suffix']

To set a prefix or suffix, first scan the 'Add prefix' or 'Add suffix' code, then scan the corresponding character from the Character Table, and finally scan the 'Save settings' code.

Hiding Barcode Characters

Hiding leading characters

[Barcode for 'Hiding leading characters']

Hide trailing characters

[Barcode for 'Hide trailing characters']

To hide individual characters, first scan the 'Hide initial characters' or 'Hide end characters' code, and then use the scanner to read the code at the end of this manual, corresponding to the number of digits to be hidden.

For example, if you want to hide the first two characters of a barcode, first scan the 'Hide initial characters' code, then scan the '0' and '2' codes from the table.

Character Table

The following tables list barcodes for various characters and control codes.

Control Codes & Special Characters (Page 1)

SOH [Barcode for 'SOH']	STX [Barcode for 'STX']	ETX [Barcode for 'ETX']
EOT [Barcode for 'EOT']	ENQ [Barcode for 'ENQ']	ACK [Barcode for 'ACK']
BEL [Barcode for 'BEL']	Backspace [Barcode for 'Backspace']	TAB [Barcode for 'TAB']
LF [Barcode for 'LF']	VT [Barcode for 'VT']	FF [Barcode for 'FF']
CR [Barcode for 'CR']	SO [Barcode for 'SO']	SI [Barcode for 'SI']
DLE [Barcode for 'DLE']	DC1 [Barcode for 'DC1']	DC2 [Barcode for 'DC2']
DC3 [Barcode for 'DC3']	DC4 [Barcode for 'DC4']	NAK [Barcode for 'NAK']

Control Codes & Special Characters (Page 2)

SON [Barcode for 'SON']	ETB [Barcode for 'ETB']	CAN [Barcode for 'CAN']
EM [Barcode for 'EM']	SUB [Barcode for 'SUB']	ESC [Barcode for 'ESC']
FS [Barcode for 'FS']	GS [Barcode for 'GS']	RS [Barcode for 'RS']
U.S. [Barcode for 'U.S.']	SPACE [Barcode for 'SPACE']	! [Barcode for '!']
" [Barcode for '"']	# [Barcode for '#']	$ [Barcode for '$']
% [Barcode for '%']	& [Barcode for '&']	' [Barcode for ''']
( [Barcode for '(']	) [Barcode for ')']	* [Barcode for '*']
+ [Barcode for '+']	, [Barcode for ',']	- [Barcode for '-']

Numbers & Punctuation (Page 3)

. [Barcode for '.']	/ [Barcode for '/']	0 [Barcode for '0']
1 [Barcode for '1']	2 [Barcode for '2']	3 [Barcode for '3']
4 [Barcode for '4']	5 [Barcode for '5']	6 [Barcode for '6']
7 [Barcode for '7']	8 [Barcode for '8']	9 [Barcode for '9']
: [Barcode for ':']	; [Barcode for ';']	< [Barcode for '<']
= [Barcode for '=']	> [Barcode for '>']	? [Barcode for '?']
@ [Barcode for '@']	A [Barcode for 'A']	B [Barcode for 'B']
C [Barcode for 'C']	D [Barcode for 'D']	E [Barcode for 'E']

Letters (Page 4)

F [Barcode for 'F']	G [Barcode for 'G']	H [Barcode for 'H']
And [Barcode for 'And']	J [Barcode for 'J']	K [Barcode for 'K']
L [Barcode for 'L']	M [Barcode for 'M']	N [Barcode for 'N']
About [Barcode for 'About']	P [Barcode for 'P']	Q [Barcode for 'Q']
R [Barcode for 'R']	S [Barcode for 'S']	T [Barcode for 'T']
At [Barcode for 'At']	V [Barcode for 'V']	In [Barcode for 'In']

Letters & Symbols (Page 5)

X [Barcode for 'X']	Y [Barcode for 'Y']	With [Barcode for 'With']
[ [Barcode for '[']	\ [Barcode for '\']	] [Barcode for ']']
^ [Barcode for '^']	- [Barcode for '-']	' [Barcode for ''']
a [Barcode for 'a']	b [Barcode for 'b']	c [Barcode for 'c']
d [Barcode for 'd']	e [Barcode for 'e']	f [Barcode for 'f']
g [Barcode for 'g']	h [Barcode for 'h']	and [Barcode for 'and']
j [Barcode for 'j']	k [Barcode for 'k']	l [Barcode for 'l']
m [Barcode for 'm']	n [Barcode for 'n']	about [Barcode for 'about']

Letters & Symbols (Page 6)

p [Barcode for 'p']	q [Barcode for 'q']	R [Barcode for 'R']
s [Barcode for 's']	t [Barcode for 't']	at [Barcode for 'at']
v [Barcode for 'v']	in [Barcode for 'in']	x [Barcode for 'x']
y [Barcode for 'y']	with [Barcode for 'with']	{ [Barcode for '{']
\| [Barcode for '\|']	} [Barcode for '}']	~ [Barcode for '~']
Delete [Barcode for 'Delete']	F1 [Barcode for 'F1']	F2 [Barcode for 'F2']
F3 [Barcode for 'F3']	F4 [Barcode for 'F4']	F5 [Barcode for 'F5']

Function Keys & Navigation (Page 7)

F6 [Barcode for 'F6']	F7 [Barcode for 'F7']	F8 [Barcode for 'F8']
F9 [Barcode for 'F9']	F10 [Barcode for 'F10']	F11 [Barcode for 'F11']
F12 [Barcode for 'F12']	INSERT(insert) [Barcode for 'INSERT(insert)']	HOME [Barcode for 'HOME']
Page Up [Barcode for 'Page Up']	Delete [Barcode for 'Delete']	END [Barcode for 'END']
Page Down [Barcode for 'Page Down']	Right arrow [Barcode for 'Right arrow']	Left arrow [Barcode for 'Left arrow']
Bottom arrow [Barcode for 'Bottom arrow']	Top arrow [Barcode for 'Top arrow']

	User Manual for HD10C Wired Barcode Scanner with Stand Comprehensive user manual for the HD10C wired barcode scanner, detailing specifications, setup, scanning modes, and advanced configuration options. Includes a character table for programming.
	HD43 Wireless Barcode Scanner User Manual User manual for the HDWR HD43 wireless barcode scanner. This guide provides detailed information on specifications, package contents, factory reset, USB pairing, scanning modes (real-time, storage), transmission and sending speeds, power and sleep settings, audio feedback, end-of-line characters, case conversion, barcode reading options, duplicate code handling, and detailed parameter settings for various barcode types including UPCA, UPCE, EAN13, EAN8, Code 39, Code 128, and GS1 DataBar.
	HD340 Stationary Barcode Scanner - Specifications and Features Detailed information about the HD340 stationary barcode scanner by HDWR, including its technical specifications, supported 1D and 2D codes, scanning speed, and connectivity options (USB/RS232). Ideal for built-in applications.
	HDWR HD42A Barcode Reader: Programming '#' Suffix Instructions for setting the '#' character as a suffix on the HDWR HD42A barcode scanner by scanning a specific configuration barcode.
	HD6700B Wireless Barcode Scanner: Features and Specifications Explore the features and technical specifications of the HD6700B wireless barcode scanner, including its 1D/2D scanning capabilities, Bluetooth and radio communication, large memory capacity, and ergonomic design.
	HDWR HD1100 Wireless 1D/2D Barcode Scanner with CMOS Sensor Detailed specifications and features of the HDWR HD1100 wireless 1D/2D barcode scanner, including its applications in various business environments.
	HD3900 2D Code Reader User Manual - HDWR Comprehensive user manual for the HD3900 2D Code Reader by HDWR, detailing specifications, features, setup, and configuration options for barcode scanning.
	Programming Vertical Bar and Hash as Suffixes for HD42A Reader Guide on programming the vertical bar (\|) and hash (#) characters as suffixes for the HD42A barcode scanner by scanning a specific programming barcode.