User Manual
HD3900 2D Code Reader
Brand: HDWR
Website: hdwrglobal.com
Specifications
- Sensor: 640*480 CMOS
- Scanning method: manual (on the button) / automatically (after bringing the code closer)
- Scan acknowledgement: sound and light signal
- Scan Angle: Swivel ±360°, Horizontal ±60°, Slant ±70°
- Internal memory capacity: store up to 120K scanned codes
- Operating time on a single charge: 15 hours
- Full charge time: 4 hours
- Interface: USB
- Compatible with operating system: Linux, Android, Windows XP, 7, 8, 10, MacOS
- Device dimensions: 16.5 x 8.6 x 6.6 cm
- Package dimensions: 18.5 x 11 x 8.3 cm
- Device weight: 173 g
- Package weight: 312 g
- Operating temperature: 10 to 45°C
- Storage temperature: -20 to 40°C
- Operating Humidity: 5 to 95%
- Storage Humidity: 5 to 95%
Readable Codes
1D Codes:
- Airline 2 of 5, Codabar, Codablock A, Code 128, Code 11, Code 32, Code 39, Code 93, EAN/UPC, EAN-8, EAN-13, Full ASCII Code 39, GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, HongKong 2 of 5 (China post), Interleaved 2 of 5, RSS-14, RSS-LIMITED, RSS-EXPANDED, Straight 2 of 5 Industrial, Telepen, Trioptic Code, UPC-A, UPC-E, MSI, Pharmacode, Matrix 2 of 5, Codablock F
2D Codes:
- Data Matrix Code, HANXIN, Maxicode, MicroPDF417, QR Code, Aztec Code, Composite, DOT_CODE
Set Contents
- Code reader
- USB cable
- USB microreceiver
- Manual
Features
- Scanning: manual (push-on) / automatic (when the code is brought closer)
- Available interfaces: USB
- Types of barcodes scanned: 1D and 2D barcodes, including QR and Aztec from paper labels and phone screens
- Internal memory capacity: store up to 120K scanned codes
Configuration Codes
Basic Configuration Codes
- Factory reset
- Battery Status
- Manual mode
- Auto mode
Audio Settings
- Turn on the sound
- Low volume
- Medium volume
- High volume
Backlight Settings
- Enable the crosshair
- Disable the crosshair
- Turn on the backlight
- Turn off the backlight
Wireless Settings
- Pairing with the receiver
- Real-world mode
- Stock mode
- Transfer
- Memory Cleanup
Standby Settings
- After 30 seconds
- After 1 minute
- After 5 minutes
- After 30 minutes
- Permanently off
- Sleep