Baseus T typed Bluetooth MP3 charger with car holder (PPS Quick Charger)

Product features

This product is a multifunctional car Bluetooth MP3 player, featured with Bluetooth 2.4G transmission and FM transmission technology. After connecting with a mobile phone via Bluetooth, it transmits mobile phone music to the car radio for playing and hands-free answering. It supports protocols such as PD3.0, PPS, QC3.0, Huawei SCP, FCP, and more for charging mobile phones. The quick charge circuit includes protection measures against overcurrent, overvoltage, and short circuits. Bluetooth can connect to two mobile phones simultaneously, allowing hands-free answering, rejection, and redialing. It supports music playback from flash drives and TF cards. The battery voltage testing function monitors the car's battery voltage in real-time, helping to avoid start-up failures due to abnormal voltage. Its simple and fashionable appearance enhances its design grade. With simple operation and practical functions, it is a necessary product for most drivers.

Product parameters

Distribution of keys and interfaces

• [1] [USB1 charging port]
• [2] [Type-C charging port]
• [3] [Flash disk/charging port]
• [4] [LED display screen]
• [5] [Multifunction keys]
• [6] [Operating status indicator light]
• [7] [Previous song key]
• [8] [Next song key]
• [9] [Microphone]
• [10] [TF card slot]
• [11] [Negative contact]
• [12] [Positive contact]

Main functions

1. Bluetooth Music Playback
2. Handsfree Call
3. USB1/Type-C Quick Charge Port
4. Flash Disk/TF Card Music Playback
5. FM Transmission
6. Battery Voltage Testing
7. Bluetooth for 2 Mobile Phones
8. Bluetooth LED Display
9. System Voice Broadcast
10. Support Lossless Music Playback

Basic operations

1. Insert the product S-13 into the cigarette lighter port of the car. The display screen will light up after power-up, showing the battery voltage for 3 seconds. If the voltage is normal, the FM frequency will display. Otherwise, the screen will continuously display the flashing battery voltage.
2. FM frequency adjustment: Turn on the car radio and select an empty channel frequency. Then, adjust the product S-13 frequency to match the car radio's frequency by pressing the [FM adjust key] ? for 2 seconds. When the screen frequency number flashes, use the [control knob] (left (-) and right (+)) to set the FM transmission frequency. The device automatically enters the set frequency.

Bluetooth connection

For the first time, connect the player to your mobile phone via Bluetooth pairing:

1. Open your phone's Bluetooth settings and search for the player device named "[S-13]". Click to connect.
2. Upon successful pairing, a system voice will announce "Bluetooth connected". The phone will automatically reconnect in the future. Music played on the mobile phone can be synchronized to the car stereo.

Note: Avoid setting the product's FM frequency to match local radio frequencies with strong FM signals. A clearer car frequency improves sound quality.

Connecting two mobile phones at the same time:

• Have both mobile phones search for "[S-13]". After the first phone connects successfully, connect the second phone. Both phones will automatically reconnect in the future.
• (Tip: If the second phone cannot find "[S-13]", disconnect the first phone's Bluetooth and try searching again with the second phone.)

Bluetooth hands-free call

• Answer call: Short press the [multifunction key] ? once for an incoming call.
• Hang up call: Short press the [multifunction key] ? once during a call.
• Reject call: Long press the [multifunction key] ? for 2 seconds for an incoming call.
• Redial last number: Short press the [multifunction key] ? twice continuously.

Music playback

• Playback priority: Bluetooth, then USB drive, then TF card. The default mode at startup is Bluetooth.
• After successful Bluetooth connection, short press the [multifunction key] ? to open the default player on the mobile phone.
• Press the [previous song key] ◀️ to play the previous song, and the [next song key] ▶️ to play the next song. Turn the [control knob] to decrease volume (left) or increase volume (right) continuously.
• Short press the [play/pause key] ⏯️ to play or pause music.
• In Bluetooth mode, if a USB drive or TF card is inserted, music from the inserted device will play automatically, and the most recently inserted device will be read first.
• Power-off memory: After power-off and restart, the FM frequency, track, and playback mode from before power-off are memorized.

Key operation

• Answer call: Short press the [multifunction key] ? once for incoming calls.
• Hang up call: Short press the [multifunction key] ? once during dialing or calling.
• Reject call: Press the [multifunction key] ? for 2 seconds when there's an incoming call.
• Redial last number: Short press the [multifunction key] ? twice to dial the last outgoing number.
• Music Playback: Priority is Bluetooth, USB drive, TF card. Default is Bluetooth on startup.
• Select previous and next songs: Press the [previous song key] ◀️ to select the previous song, and press the [next song key] ▶️ to select the next song.
• Volume Up and Down: Turn the [control knob] left to reduce volume continuously, and right to increase volume continuously.
• FM Frequency Adjustment: Long press the [FM adjust key] ? for 2 seconds. The FM state activates when frequencies flash. Use the [control knob] left/right to adjust frequency up/down.
• Mode Switch: In working state, press the [mode switch key] ⚙️ for 5 seconds to switch between Bluetooth, USB drive, and TF Card modes.

Indication of status light

• Blue-green alternative quick flash: Bluetooth not connected.
• Solid blue light: Bluetooth connected/Bluetooth music paused.
• Blue light flashing slowly: Playing Bluetooth music.
• Green light flashing slowly: Playing music from USB drive/TF card.
• Solid green light: During a phone call, music from USB drive/TF card will be paused.

Car charging function

• USB1/Type-C ports: Quick charge ports for mobile phones supporting protocols like PD3.0, PPS, QC3.0, Huawei SCP, FCP. Use a compatible charging cable.
• Quick charging is not supported when USB1 and Type-C ports are used simultaneously. USB1 supports DC5V/2.5A maximum, and Type-C port supports DC5V/2.5A maximum.
• USB2 port: Ordinary charging port, also supports music playback from USB drive.

Battery voltage testing function

When the battery voltage is lower than 11.6V or higher than 14.8V for a 12V vehicle battery, the LED digital tube will display the abnormal voltage and flash. For a 24V vehicle battery, if the voltage is lower than 23.2V or higher than 27.2V, the LED digital tube will display the abnormal voltage and flash. This voltage warning function helps users monitor battery health in real time.

Note: In case of abnormal voltage and screen flashing, it is recommended to replace the car battery or perform maintenance. The S-13 function can still be used normally during this period.

Important Notice

• Do not allow children to unplug and play with the product and charging cable.
• The input voltage is DC12V/24V. Exceeding the specified voltage range may cause abnormality and damage.
• If the product is not used for a long time, please unplug it from the car's cigarette lighter socket.

Usage and Troubleshooting

• When setting FM frequency, avoid using frequencies of local stations with strong FM signals to prevent interference with music playback.
• Do not use this product in areas with high voltage lines and strong magnetic fields.
• Do not disassemble the product.

Q&A

Q: Can I change the FM transmit frequency?

A: Yes, the product remembers the last used frequency. To adjust, press and hold the [FM adjust key] ? for 2 seconds, then use the [control knob] to adjust the frequency.

Q: Why doesn't the phone support quick charging?

A: Confirm that your mobile phone supports the product's charging protocols and that the charging cable used also supports quick charging for your phone.

Q: The mobile phone can find [S-13] device, but the connection was unsuccessful?

A: Check if another mobile phone is connected. If so, disconnect it first, then try connecting again. Ensure Bluetooth is enabled on your phone.

Q: Is it safe to charge the mobile phone?

A: Yes. The product is designed with conventional protection circuits and operates according to standards.

Q: Does it support navigation broadcasting?

A: Yes, after successful Bluetooth connection, it supports voice navigation broadcasts from the mobile phone.

Q: Is there any noise in the music when playing in the car?

A: It is recommended to use an empty local frequency or a frequency with a weak radio signal.

Q: The device music can't be played from the car radio?

A: Confirm that the player is connected to the mobile phone via Bluetooth and that the player's frequency matches the car radio's frequency.

Q: The voltage value displayed on the screen is flashing all the time?

A: This indicates the car battery voltage is outside the standard range. It is recommended to visit a car repair station for battery maintenance.

Q: Why is the Bluetooth connection of the second mobile phone failed?

A: Check if the first mobile phone is connected successfully. If so, disconnect the first phone's Bluetooth. Then, search with the second phone for connection, and finally, turn on the Bluetooth of the first mobile phone again.

FCC Compliance and RF Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Declarations and Compliance

It is declared that CCTM-A01, CCTM-B01, product models of Shenzhen Times Innovation Technology Co., Ltd., comply with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: [website address not provided in PDF]

This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center capable of recycling electronic and electrical equipment. [WEEE symbol description]

Compliance Marks: CE, FC, UK CA

Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.

Address: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen

Executive Standard: Q/SSCZ 012-2020

Hotline: +86-4000-712-711

Website: www.baseus.com

Designed by Baseus

Made in China

Model Number: PB2065Z_P0A1