KICKER KXMA800.8 Amplifier
Product Overview
Thank you for purchasing the KICKER KXMA Amplifier. The KXMA-series is engineered for demanding outdoor and marine audio applications. Key features include a UV-treated aluminum chassis, conformal coated PCBs, thick gasketing for protection, and terminals meeting rigorous ABYC/NMMA standards. Combined with KICKER's audiophile-grade components, DSP features, and signature power, this amplifier ensures a memorable audio experience on the water or patio. For maximum aquatic audio performance, consider integrating the KICKER Marine product family.
Sincerely,
Steve Irby
President/CEO
Mounting Instructions
Choose a dry, structurally sound location to mount your KICKER amplifier. Ensure no obstructions are behind the mounting area. Allow at least 4 inches (10 cm) of open ventilation around the amplifier. Drill four holes using a 7/64" (3mm) bit and secure the amplifier with the supplied #8 screws. Avoid drilling through the bottom of the boat.
Installation Note: KICKER recommends professional installation by licensed providers. Ensure safe mounting and wiring. Cap unused wires and prevent electrical shorts.
Wiring Information
Refer to the owner's manual for detailed information on using amplifier features such as gain, crossover, and bass boost.
Model | External Fuse (sold separately) | Power/Ground Wire | KICKER Wiring Kit |
---|---|---|---|
KXMA800.8 | 1 x 125 Ampere | 4 Gauge | KMPK4, PK4, CK4 |