HOVERAir X1 PRO/PROMAX Quick Start Guide and User Manual

Getting Started

Please read this guide before your first flight.

Follow these steps to prepare your HOVERAir X1 PRO/PROMAX for flight:

1. Step 1: Charge the Battery

   Please charge the battery first to activate it.

   Take out the HOVERAir X1 PRO/PROMAX.

   Fold the HOVERAir X1 PRO/PROMAX.

   Connect the charger to activate the battery. The screen will display a charging animation.

   The device is fully charged when the screen shows 100% battery or is completely off.

2. Step 2: Download the App

   Scan the QR code to download and install the Hover X1 App to activate the device.

   [QR code for app download]

3. Step 3: Power On/Off

   Press and hold the power button for about 2 seconds to turn on the screen. Press and hold the power button to power off.

4. Step 4: Connect the App

   HOVERAir X1 PRO/PROMAX connects to the app via Bluetooth. Follow these steps:

   1. Turn on the HOVERAir X1 PRO/PROMAX.
   2. Open the Hover X1 App.
   3. Tap to enter the 'Hover' page, follow the prompts to enable Bluetooth. Tap 'Hover' to search for nearby HOVERAir devices, then select to connect.

   Note: Press and hold both select buttons simultaneously until the status light turns blue. This indicates the device has entered Bluetooth pairing mode and can be connected to your phone.

   [Illustration showing status light turning blue]

5. Step 5: Launch the HOVERAir X1 PRO/PROMAX

   Unfold the HOVERAir X1 PRO/PROMAX as shown in the illustration and hold it horizontally.

   Press the power button.

   Take Off: Release the device when the propellers start spinning rapidly.

6. Step 6: Land/Retrieve the HOVERAir X1 PRO/PROMAX

   Intelligent Flight Modes

   After completing intelligent flight modes, the HOVERAir X1 PRO/PROMAX will automatically return to the takeoff area. When the drone approaches, place your hand about 20 cm directly beneath it. The device will land on your palm, and the propellers will stop rotating.

   [Illustration of hand positioned under the drone for landing]

   In an emergency, grab the HOVERAir X1 PRO/PROMAX and briefly press the power button, or rotate it 180 degrees. The propellers will stop spinning immediately.

   [Illustration of pressing power button briefly]

   [Illustration of rotating the drone 180 degrees]

   Manual Control

   In manual control mode, pilot the HOVERAir X1 PRO/PROMAX to a suitable location and land it manually. Alternatively, use the one-click return function to bring the HOVERAir X1 PRO/PROMAX back near the takeoff point.

   Notice: Do not insert fingers or other objects into the prop guard. For additional safety precautions, please refer to the disclaimer and safety manual on our official website (https://hoverair.com/pages/xl-pro-and-promax-support).

   [Illustration showing a hand with a red circle and slash over the prop guard]

7. Step 7: Switch Modes and Set Parameters

   Introduction to Screen Functions

   OmniTerrain

   When the 'OmniTerrain' icon is illuminated, the flying camera can capture a broader range of scenes, including water surfaces (?), large areas of uniform-colored ground (?️), expansive monochromatic landscapes, swaying rice fields (?), flower meadows, and low-light environments (?). It is recommended not to fly in these scenes when the icon is not illuminated.

   [Illustration of drone screen showing OmniTerrain mode and environmental icons]

   Switch the Intelligent Flight Mode

   Switch flight mode by short pressing the select button.

   [Illustration of hand pressing the select button on the drone]

   Setting Parameters

   Press and hold the switch button to enter the flight path parameter settings. The parameters will start flashing, indicating that they can be adjusted. Use short presses of the switch button to cycle through the flashing flight path parameters.

   When the flight mode parameters are flashing, long-press the select button to switch between parameter settings.

   Both mode switching and parameter settings can be done through the App.

8. Step 8: Video and Photo Downloads

   After connecting via Bluetooth to the HOVERAir X1 PRO/PROMAX, you can view low-resolution thumbnails of newly captured footage on the 'Hover' page in the app. Select your preferred works for downloading.

   After downloading, you can view the downloaded content in 'Home > Moments' or in your phone's local gallery.

   [Illustration of app screen showing 'World Moments' with options to 'Tap on Hover', 'Tap on Album', 'Tap on Moments', 'Tap on Home']

   Note: To download content, please connect to the Wi-Fi of the Hover flying camera and follow the prompts until the connection is complete.

   Flight Restrictions

   1. You should use this product in accordance with local laws and regulations for safety. Ensure that both the firmware of the flying camera and the app are updated to the latest versions.
   2. Flight restricted areas include but are not limited to major airports worldwide, major cities/regions, event venues, etc. Before operating this product, please consult and comply with all local laws and regulations.

Product Specifications (HOVERAir X1 PRO/PROMAX)

HOVERAir X1 PRO/PROMAX PowerCase User Manual

This section provides details on the PowerCase for your HOVERAir drone.

PowerCase Components

The PowerCase has the following components:

• 01 Charging Port C1: For connecting to an external power source.
• 02 Battery Display Button: Press to show the battery level.
• 03 Battery Indicator: Lights indicating battery status.
• 04 Viewing Screen: Displays battery information.
• 05 Hook: For carrying or attaching the PowerCase.
• 06 Installation Wrench: Used for adapter removal.
• 07 Charging Port C2: For charging the drone via adapter.
• 08 Charging Port C2 Adapter: Connects the drone to Port C2.

[Diagram showing the PowerCase with numbered components]

[Diagram showing the PowerCase with adapter and wrench]

Adapter Installation

Remove the Charging Port C2 Adapter, insert it into the HOVERAir X1 PRO/PROMAX, and place the HOVERAir X1 PRO/PROMAX into the PowerCase for charging.

[Illustration of inserting the adapter into the drone and then into the PowerCase]

Adapter Removal

Use the Installation Wrench to remove the charging adapter from the HOVERAir X1 PRO/PROMAX.

[Illustration of using the wrench to remove the adapter]

Charging

• When only C1 is connected to an external power source, it charges the PowerCase with a maximum power of 45W.
• When C1 is connected to an external power source and the HOVERAir X1 PRO/PROMAX is placed in the PowerCase:
  • The external power source prioritizes charging the HOVERAir X1 PRO/PROMAX with a maximum power of 30W.
  • Once the HOVERAir X1 PRO/PROMAX is fully charged, the external power source charges the PowerCase.

[Illustration of PowerCase charging the drone]

Discharging

• When only the HOVERAir X1 PRO/PROMAX is in the PowerCase, it charges the drone with a maximum power of 36W.
• When only a phone is connected to the charging case, it charges the phone with a maximum power of 45W.
• Connect your phone to the PowerCase while the HOVERAir X1 PRO/PROMAX is inside the case:
  • The PowerCase will prioritize charging the phone (maximum 45W).
  • Once the phone is fully charged or disconnected, it will charge the HOVERAir X1 PRO/PROMAX (maximum 36W).

[Illustration of PowerCase charging a phone]

Checking Battery Level

Short press the battery display button to show the battery level.

[Illustration showing the battery display button and indicator lights]

Charging Indicator Light

Discharging Indicator Light

[Note: The table above uses filled circles (●) to represent illuminated LEDs and arrows (↓) to indicate decreasing levels or specific states as depicted in the original document.]

Product Specifications (PowerCase)

• Built-in Battery Rated Voltage:
• Input: DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A
• Charging Port C1 Output: DC 5V/3A, 9V/3A, 12V/3A
• Charging Port C2 Output: DC 12V/2.5A
• Battery Capacity: 2*6000mAh/46.2Wh
• Operating Temperature: -20°C to 30°C (-4°F to 86°F)

It is recommended to use the official 65W Power Adapter to achieve the highest charging speed.

Precautions

1. When using the PowerCase to charge the HOVERAir X1 PRO/PROMAX, use the official 65W adapter or other PD fast chargers that meet FCC/CE specifications. Use the official charging cable or a cable supporting 5A or above. Using non-recommended adapters or cables may result in slow charging, inability to charge, or other risks.
2. Ensure the PowerCase is placed securely and kept dry. Use in a well-ventilated area and take care to prevent fire risks.
3. Do not touch the power interface or adapter with hands or conductors.
4. If the power interface or adapter is attached with liquid, wipe it clean with a dry cloth while unpowered.
5. Disassembling, piercing, impacting, crushing, short-circuiting, and burning the PowerCase are strictly prohibited.
6. Do not use the PowerCase if it has been submerged in water.
7. The PowerCase may become slightly warm during charging, which is normal. If the battery temperature is high, the PowerCase will wait for it to cool down before charging.

Disclaimer

Before using the HOVERAir X1 PRO/PROMAX PowerCase, read the User Manual carefully. Understanding and following instructions helps prevent harm and product damage.

By using this product, you agree to the terms and conditions. You take full responsibility for product use and outcomes. Zero Zero Technology is not responsible for damage, injury, or legal issues from improper use.

Battery Safety Instructions

Before charging and using the battery, please read this "HOVERAir X1 Pro/HOVERAir XI Pro Max Battery Safety Manual" carefully and follow the instructions strictly.

Disclaimer: Shenzhen Zero Zero Infinity Technology Co., Ltd. is not responsible for any accidents caused by using the battery under conditions beyond those specified in this manual.

Warning

1. Lithium batteries contain highly reactive chemicals. Improper use (e.g., exposure to water, high temperatures, or physical damage) can cause fires, property damage, or personal injury.
2. The liquid inside the battery is highly corrosive. In case of leakage, avoid contact. If the liquid contacts skin or eyes, rinse immediately with water and seek medical attention.
3. Never leave the battery in a vehicle, especially if exposed to direct sunlight.
4. Do not expose the battery or the flying camera with the battery to high-temperature environments or hot objects (e.g., barbecue grills, microwaves, gas stoves, campfires, or recently used lighters).
5. Prevent the battery from coming into contact with any liquids. Do not use the battery in rain or humid environments. Water exposure can cause short circuits, circuit damage, or malfunctions, resulting in fire or explosion.
6. The battery is temperature-sensitive. Always use and store it within the specified temperature range for safety and optimal performance.

Pre-Charging Inspection

1. Inspect the charging port for liquids, debris, or foreign objects. Check for signs of corrosion, damage, or if the battery is excessively hot.
2. Inspect the battery's exterior. Do not charge if you notice damage, swelling, or leakage.
3. Regularly inspect the charging cable and battery's exterior. Do not use damaged charging cables.
4. Only use batteries and charging equipment provided by Zero Zero Technology. Issues from non-official equipment are the user's responsibility.

Charging Precautions

1. Do not charge the battery immediately after a flight if it is still hot, as this reduces lifespan and activates high-temperature protection, leading to extended charging times.
2. If the battery is very low, charge it within the permissible temperature range. Delaying charging a low battery can result in over-discharge and damage.
3. After flight, remove the battery and place it in a well-ventilated area (not in bags or pockets, which hinder heat dissipation). Charge once it has cooled to the permissible temperature range.
4. Do not charge the battery near flammable or combustible materials.
5. Monitor the battery's condition during charging to prevent accidents.
6. In case of fire, cut off all power sources. Submerge the burning battery in water or move it to an area free of flammable materials and douse it with water.
7. The battery supports charging within 5°C to 40°C (41°F to 104°F). Charging is longer at lower temperatures (5°C-15°C) and shorter at normal temperatures (15°C-40°C), extending lifespan.

Storage and Transportation

1. Do not store batteries in environments with seawater, moisture, leakage, sand, dust, or dirt.
2. Avoid proximity to flammable or explosive materials, heat sources, and direct sunlight.
3. Battery storage conditions:
   • Recommended state of charge: 40%-60%.
   • Recommended storage temperature: 15°C-25°C.
   • Humidity: 45%RH-75%RH.
4. If batteries are stored for more than two months, recharge them every two months to maintain cell activity.
5. If the battery is severely depleted and remains idle for an extended period, it will enter sleep mode and require recharging to activate.

Warranty Information

If you experience issues with your product during the warranty period, please follow these steps to request service.

Warranty Service Request

The warranty period begins on the date of purchase. If proof of purchase is unavailable, the warranty start date is 90 days after the manufacturing date. If the last day falls on a holiday, it extends to the next business day.

Zero Zero Technology provides free repairs for confirmed defects in materials or workmanship within the warranty period. For issues outside the warranty or not due to component quality, paid repair services are available. Zero Zero Technology covers return shipping costs for free repairs.

Situations Not Covered by Free Warranty:

• Faults or damage caused by transportation or handling after purchase.
• Unauthorized modifications, disassembly, or repairs.
• Damage from accidental factors or human actions (liquid ingress, drops, incorrect voltage, excessive pressure, motherboard deformation, etc.).
• Faults or damage from improper installation, use, maintenance, or storage not per the user manual.
• Damage from flight/filming activities not conducted per the product manual.
• Inability to provide valid proof of purchase or altered documents.
• Torn, altered, or illegible labels, serial numbers, or tamper-evident marks.
• Faults or damage from force majeure (fire, earthquake, flood, etc.).
• Accidents like collisions, burns, or loss caused by non-quality-related human factors.
• Damage from operating in complex electromagnetic environments or areas with strong interference sources.
• Damage from interference from other wireless devices.
• Damage from taking off with a weight exceeding the safe takeoff limit.
• Damage from forced flight with aged or damaged components.
• Reliability and compatibility issues with non-Zero Zero Technology certified third-party components.
• Damage from insufficient discharge due to low battery power or using a battery with quality issues.
• Batteries not charged or discharged for over three months.
• Evidence of tampering or alteration on serial numbers, factory labels, or markings.
• Failure to follow official guidelines for lost product certification.
• Failure to send relevant items within 7 calendar days after contacting Zero Zero Technology for warranty service confirmation.
• Other performance issues not caused by product quality problems.

Additional Information

• Product repair may result in data loss; back up data before sending for repair. Zero Zero Technology is not responsible for data loss during repair.
• The customer is responsible for losses due to incorrect delivery addresses or refusal to accept packages.
• Water damage can severely affect performance. Zero Zero Technology may offer replacement for irreparable products.
• Before sending for repair, remove personalized items or decorations. Zero Zero Technology is not responsible for damage or loss of these items.
• Inspect the product for damage (including shipping damage) upon receipt. Notify within 7 days of receipt. Otherwise, the product is assumed to be in good condition.
• Replaced components (including paid repairs) are owned by Zero Zero Technology.
• For products beyond warranty or free repair scope, Zero Zero Technology will provide a quote. Users are responsible for settling fees for chargeable services.