HOVERAir X1 Smart Drone

Components

• 01 Power button/take-off button
• 02 Mode toggle button
• 03 Mode indicator
• 04 Battery
• 05 Battery level indicator
• 06 Gimbal
• 07 Status indicator
• 08 Motor
• 09 Bottom visual sensor
• 10 Heat vents
• 11 Propellers
• 12 Prop guards
• 13 USB-C port

Getting Started

Step 1: Download the App

Scan the QR Code and download the Hover X1 App. The app is available for iOS and Android.

Step 2: Charging

Charge the battery by plugging the charging cable into the device. A flashing battery indicator signifies that the battery is charging. Once fully charged, the battery lights will all turn on and then turn off.

Step 3: Power on/off

Press and hold the power button until you hear the power-on sound and the status light turns green. The device will power on in approximately 3 seconds.

Step 4: Toggle between different flight modes

Place the HOVERAir X1 Smart flat in the palm of your hand. Press the [Mode button] to toggle flight modes, and then press the power button again to take off.

To take off: Place the drone in your hand and press the power button.

Step 5: Landing your HOVERAir X1 Smart

To land: Grab the HOVERAir X1 Smart from the air and short-press the power button, or flip the device 180 degrees. The propellers will stop turning.

Alternatively, place your palm 20 centimeters below the HOVERAir X1 Smart. The drone will automatically land in your palm, and the propellers will stop rotating.

Attention: Do not insert fingers or other objects into the prop guard. [prohibited action]

Step 6: Connect to the app

Use the Hover X1 app to enjoy the best flying experience.

Specifications

Main Specs

Camera

App

Disclaimer and Safety Manual

Disclaimers and Warnings

This manual contains important information for the safe and correct usage of this product. Read this handbook carefully before using the product. The HOVERAir X1 Smart is a small flying camera for taking pictures and videos. This product is not a toy and should not be operated by a person whose use of the product would create safety concerns, including but not limited to:

• Children under 14; Minors aged 15-18 should be accompanied by a parent or guardian or supervised by a professional.
• Persons affected by alcohol, illegal drugs, dizziness, tiredness, or other unpleasant physical or mental conditions.
• Avoid obstacles, people, animals, buildings, public facilities, trees, and water during flight. Pay special attention when the device's altitude rises.
• Before operating, read the entire handbook to understand product features. Improper use may cause property damage, accident, or injury. By using this product, you signify understanding and acceptance of all terms and conditions.
• The user agrees to be responsible for their actions and all derived results, using the product only for safe and lawful purposes.
• Advice or information from external policies does not apply to the company or its products unless specified.

Guidelines for safe use

Flying environment

This product must be flown in an area where general flight is permitted. Flight area restrictions include, but are not limited to:

• This product uses a bottom-facing visual sensor. It is suitable for heights between 0.5 and 15 meters.
• Avoid flying at night; vision systems may not recognize low-light ground features.
• If ground texture is unclear, the vision system may malfunction. Use caution in situations with monochrome ground, water or transparent ground, highly reflective ground, areas with frequent light changes, very dark or very bright ground, and areas with moving objects at the bottom.
• The bottom-facing visual sensor must be kept clean and unobstructed.
• Do not operate in areas with large elevation differences (e.g., flying out of tall building windows).
• Do not use the device in inclement weather: high winds (over level 4), snow, rain, dense fog, strong winds, hail, lightning, tornadoes, and typhoons.
• Do not operate below 0°C or above 40°C.
• Do not operate in no-fly areas. Refer to Local Laws and Flight Regulations for more information.
• Avoid flying above 2,000m altitude.
• When taking off in areas with solid particles (deserts, beaches), operate carefully to avoid particles entering the body or camera parts.

Use of wireless communication (Wi-Fi)

When using wireless remote control, fly where wireless communication is working properly.

Please note:

• Fly in an open area free of obstacles.
• Do not fly near areas with magnetic or radio interference, including Wi-Fi hotspots, Bluetooth devices, high voltage cables, radar stations, mobile base stations, and broadcast towers. Interference may cause malfunction or uncontrollable behavior, leading to degraded product quality and image transmission errors.

Pre-flight confirmation

Before using, understand all features, flight requirements, and government regulations, including:

• Ensure the product is fully charged.
• Check that the device and its components (prop guards, motor, batteries, propellers, gimbal) are functioning properly.
• Ensure the Hover X1 App is updated to the latest version.
• Read the product information, disclaimer, Safety Manual, and Getting Started Guide.

How to safely operate

Always pay attention to safety regulations. The user is responsible for personal or property injury caused by improper usage. Proper operating procedures include:

• Stay away from rotating propellers and motors.
• Confirm an appropriate flying environment. Avoid flying over water or snow for proper visual system function.
• Ensure the product is used in an environment without obstructions. Pay attention to surroundings during flight.
• Ensure sufficient battery for normal operation. Low battery power-off may damage or prevent saving of video/images. The Company is not liable for data loss due to user error.
• Do not tamper with the gimbal.
• The Company is not liable for malfunctions, injury, or accidents caused by using non-qualified accessories.
• Do not modify or disassemble the product. The user is responsible for consequences of modification or disassembly.

Other precautions

• Do not use under the influence of alcohol, illegal drugs, medication, anesthesia, or conditions causing physical/cognitive impairment (dizziness, fatigue, nausea).
• Do not drop, throw, or load the product with hazardous materials. Do not use near buildings, people, or animals, as this may cause injury or property damage.
• Do not use a damaged or abnormally performing product.
• Respect others' privacy. Do not take images or record videos without consent.
• Comply with local drone flight rules and regulations. Do not use for illegal or improper activities (espionage, military operations).
• To ensure safety, do not insert fingers or foreign objects into the protective frame. User is responsible for any damage/injury caused.

Product Maintenance

Maintenance and Storage

• Store in a protective case in a cool, dry place, protected from direct sunlight. Avoid shocks, severe electric shock, or prolonged sunlight.
• Do not expose to rain or liquids. If contact occurs, dry with a soft, absorbent cloth. Opening a water-damaged unit may cause irreparable damage. Do not use alcohol, benzene, diluted liquids, or flammable substances for cleaning or storage. Do not store in wet or dirty places.
• Store the battery in a suitable place when not in use. Recommended battery storage temperatures: Short-term (within 3 months): -10°C ~ 30°C. Long-term (3 months or more): 25±3°C.
• Address any battery abnormalities immediately by replacing the battery. Refer to the "Battery Safety Guide" for details.

Precautions for transportation

• Suitable temperature for transporting the battery: 23±5°C.
• Refer to local airport regulations before carrying batteries on board. Do not transport damaged or faulty batteries.

Local Laws and Flight Regulations

Local laws and flight regulations related to flying

Local laws and policies vary by country and region. For more information, contact your local authority.

Legal flight restrictions

• Do not fly in or around no-fly zones designated by local laws and regulations.
• Do not fly in areas with crowds (public performances, events).
• Fly within the operator's line of sight.
• Do not use to transport illegal or dangerous goods or cargo.
• Before flying, understand flight activity types and comply with local regulations.
• Do not participate in unauthorized or unpermitted flights, or flights violating legal rights (privacy, publicity), or illegal flights.

Flight Restrictions

• Use the product safely according to local laws and regulations. Update the App to the latest version.
• Restricted areas include major airports, major cities/regions, and event venues. Consult and comply with local regulations before flying.
• Be aware of surroundings and avoid obstacles like buildings, roofs, power lines, and trees.

HOVERAir X1 Smart Product Warranty

Product name: HOVERAir X1 Smart

Warranty Period:

The product warranty is based on the purchase receipt. If manufacturing defects are discovered during the warranty period, the Company will repair the product free of charge. If the product is not covered or is damaged due to user error, a repair service fee will apply. Transportation costs for free repairs are borne by the company.

The warranty does not cover the following:

• Damage from misuse (transportation, dropping, etc.).
• Product covered, repaired, disassembled, or with non-company parts replaced.
• Accidental or indirect damage, or obvious human damage (liquid infiltration, drop damage, improper voltage, motherboard damage).
• Malfunction or damage from non-compliance with the manual, incorrect installation, neglect, modification, or disassembly.
• Lost, falsified, or tampered proof of purchase or shipping receipt.
• Damaged, falsified, or tampered product labels, serial numbers, or waterproof markings.
• Damage from uncontrolled external factors (fire, flood, strong wind, lightning).
• Products without manufacturing or quality defects.

Notes on Use

• Data Backup: Back up all data before sending for repair. The Company is not responsible for data loss.
• Ownership of Repaired Parts: Ownership of removed parts belongs to the Company.
• Maintenance Costs: For products not covered by warranty, customers pay pre-established fees for paid services. Refusal to pay may result in temporary service suspension. Customers are responsible for any consequences.

For the latest Warranty Conditions and After-Sales Service Policies, refer to the company website or assistance support center.

Regulatory Information

FCC Caution

§ 15.19 Labeling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Information to user.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

§ 15.105 Information to the user.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

ISED Caution

English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

French:

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf. Les utilisateurs peuvent obtenir l'information canadienne sur l'exposition et la conformité de rf.

Cet émetteur ne doit pas être co-placé ou fonctionner en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.