DELTA M520 Micro Camera User Manual
Code: M520
MICRO CAMERA M520 STANDARD: PAL, SCREW 540 TVL 3.7 mm
Warning!
Please read the user manual included in this work as it contains important information related to the safety of installation and use of the device.
Only persons who have read the user manual may use the device. The user manual must be kept as it may be required in the future. The device is to be used exclusively for purposes specified in this user manual.
The device must be unpacked prior to starting up. After removing the packaging, ensure the device is in working order. If the product has defects, it should not be used until it is repaired.
The product is intended for use at home and for commercial purposes and may not be used for other than its intended use.
The manufacturer is not liable for damages resulting from not adhering to the rules contained in the user manual. Therefore, we recommend following the aforementioned safety rules for operation and maintenance of the device. In this way, you will ensure your own safety and avoid causing damage to the device.
The manufacturer and the supplier are not liable for losses or damages arising from the product, including financial or intangible losses, loss of profits, income, data, or pleasure from the use of the product or other products related to it – indirect, incidental, or consequential loss or damage. The above provisions apply whether the loss or damage concerns:
- Deterioration of quality or the lack of operation of the products or products related to it due to damage, as well as the lack of access to the product when it is undergoing repair, which results in stoppage, loss of user's time, or a break in business activity.
- Improper results of operation of the product or products related to it.
- Losses and damages according to any legal category, including negligence and other losses, termination of a contract, expressed or implied guarantee, and strict liability (even if the manufacturer or the supplier was notified about the possibility of occurrence of such damages).
Safety Measures
Particular attention during design was directed to quality standards of the device, where ensuring the safety of operation is the most important factor.
The device must be secured against contact with caustic, staining, and viscous fluids.
The device is designed to restart operation when power supply is restored after a break.
Attention! We recommend using protections to further protect the device from possible overvoltages in installations. Surge protectors are effective protection against accidental voltage surges to the device higher than the rated voltage. Damages caused by voltages higher than specified in the manual are not covered by warranty.
Turn off the device before transporting it.
Prior to connecting the device to a power source, check whether the supplied voltage is consistent with the rated voltage specified in the user manual.
Proper Product Disposal
A marking of a crossed-out waste bin ?️ indicates that the product may not be disposed of with other household waste in the entire EU. To avoid possible damage to the environment or health due to uncontrolled waste disposal, it should be handed over for recycling, thereby promoting the sustainable use of natural resources.
To return a worn-out product, use a collection and disposal system for this type of equipment or contact the seller from whom it was purchased. It will then be recycled in an environmentally friendly way.
Product Description
This is a color micro camera designed to imitate a real screw, equipped with an external microphone on the cable. The camera features a PINHOLE type lens, requiring only a very small hole to achieve the desired field of view. It can be discreetly mounted on a surface to monitor an object imperceptibly to people.
Image Description: A small, black, screw-shaped camera module with a thin cable extending from it. The cable has an external microphone attached. The camera is shown next to a standard screw for scale.
Specifications
| Feature | Details |
|---|---|
| Standard | PAL |
| Sensor | 1/3" Sony CCD |
| Resolution | 540 TVL |
| Lens | 3.7 mm |
| Audio | External microphone input |
| View angle | 66° |
| Min. illumination | 0.5 Lux / F1.2 |
| Length of camera / microphone cables | 0.5 m / 0.45 m |
| Power supply | 12 V DC / 140 mA |
| Application | The camera is designed for indoor use, due to the possibility of steam condensation. |
| Housing | Mini, Metal |
| Color | Black |
| Operation temp | -20 °C ... 50 °C |
| Weight | 0.08 kg |
| Dimensions | 18 x 15 x 15 mm |
| Guarantee | 2 years |
Description of Images: The document shows two small images. The first is a close-up of the camera module and its attached microphone. The second image shows the camera module mounted discreetly, appearing as a screw head on a wooden surface.
Package
Dimensions (L x W x H): 0x0x0 mm
Gross Weight: 0 kg
