CRKD ATOM User Guide

Important Safety Information

⚠️ WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years.

This product contains small parts that may be a choking hazard for young children. Please keep out of reach of children under 3 years of age.

ATOM Layout

Front View

The front of the ATOM controller features:

• Directional Pad (Dpad): Located on the left side, used for directional input.
• Home (CRKD) Button: A central button with the CRKD logo, used for system functions.
• Minus Button (-): Located below the Home button, used for various functions including screen capture on Switch.
• Plus Button (+): Located below the Home button, used for various functions including screen capture on Switch.
• Action Buttons (A, B, X, Y): Four primary buttons arranged in a diamond pattern on the right side.
• Status LED: Indicates connection status and other information.

[Diagram Description: The front of the ATOM controller shows a Dpad on the left, four action buttons (X, Y, A, B) and a central CRKD Home button on the right, with Minus and Plus buttons below the Home button. A Status LED is also visible.]

Top View

The top edge of the ATOM controller features:

• Left Bumper (L): The top-left shoulder button.
• Left Trigger (ZL): The button below the Left Bumper.
• Right Trigger (ZR): The button below the Right Bumper on the right side.
• Right Bumper (R): The top-right shoulder button.
• USB-C Port: For charging and wired connections.

[Diagram Description: The top edge of the ATOM controller displays L, ZL, ZR, and R buttons, along with the USB-C port.]

Back View

The back of the ATOM controller features:

• RFID Touchpoint: An area for NFC interaction with the CRKD app.
• Reset Button: A small button for resetting the device.
• Wrist Strap Attachment: A point to attach a wrist strap for security.

[Diagram Description: The back of the ATOM controller shows an RFID Touchpoint area, a Reset Button, and a Wrist Strap Attachment point.]

Setup

Connection Status

The ATOM status LED indicates the connection status:

• Slow Blinking: Search/Reconnection Mode.
• Fast Blinking: Pairing Mode.
• Solid: Connected.

Note: When the status LED is slow blinking, ATOM is in search mode. ATOM cannot enter pairing mode while in search mode. Power OFF the ATOM by pressing and holding the HOME (CRKD) button for 10 seconds before attempting to enter pairing mode.

[Diagram Description: A table shows Status LED states (Slow Blinking, Fast Blinking, Solid) and their corresponding descriptions (Search/Reconnection Mode, Pairing Mode, Connected). A controller diagram highlights the Status LED and buttons used for connection.]

Connecting to Nintendo Switch™

Option 1: Bluetooth® (Pro Controller)

1. On your Switch, navigate to Settings > Controllers and Sensors > Change Grip/Order.
2. Press and hold the Home (CRKD) Button for 3 seconds to enter pairing mode. The status LED will blink fast in white.
3. The ATOM will automatically connect to the Switch.
4. Upon successful connection, the controller will be highlighted on the Switch (User 1/2/3/4). The ATOM's Status LED will be RED (1st player), BLUE (2nd player), Yellow (3rd player), or Green (4th player).

Option 2: Wired USB

1. Dock your Switch console into its base/stand.
2. Connect the ATOM controller using the USB cable.
3. The controller will automatically connect to the Switch, and the Status LED will remain solid white.
4. After disconnecting from the Switch, the controller will automatically revert to a Bluetooth® connection.

Connecting to PC

Option 1: Bluetooth® (Xinput Device) - RECOMMENDED

1. Enable Bluetooth® on your computer (or use a Bluetooth® adapter).
2. Press and hold the Up Dpad + Home (CRKD) Button for 3 seconds to enter Xinput Device pairing mode. The status LED will blink fast in orange.
3. On your computer, select "Add Bluetooth® device," then select "Bluetooth®" from the dropdown.
4. Look for "Xbox Wireless Controller" in the available options, select it, and wait for Windows to set up the device.

[Diagram Description: Illustrates Windows Bluetooth pairing screen showing "Add a device" and selecting "Xbox Wireless Controller".]

Option 2: Bluetooth® (Pro Controller)

1. Enable Bluetooth® on your computer (or use a Bluetooth® adapter).
2. Press and hold the Home (CRKD) Button for 3 seconds to enter pairing mode. The status LED will blink fast in white.
3. On your computer, select "Add Device," then select "Bluetooth®" from the dropdown.
4. Select "Pro Controller" from the available device list and wait for Windows to set up the device.

[Diagram Description: Illustrates Windows Bluetooth pairing screen showing "Add a device" and selecting "Pro Controller".]

Option 3: Wired USB

1. Connect the controller directly to your PC via the USB connection.

Note on Xinput Mode: When connecting the ATOM as an Xinput Device, the button mappings for X/Y and A/B will be switched (Y functions as X, B functions as A, and vice versa). To switch the X/Y and A/B layout mappings, press and hold the Down Dpad + Minus Button (-) for 5 seconds. The status LED will blink and then turn solid. To revert, press and hold the Down Dpad + Minus Button (-) for 5 seconds.

[Diagram Description: Shows controller buttons highlighted for the Xinput mapping change.]

Connecting to iOS / macOS

Option 1: Bluetooth® (Xinput Device) - RECOMMENDED

1. Enable Bluetooth® on your iOS or macOS device.
2. Press and hold the Up Dpad + Home (CRKD) Button for 3 seconds to enter Xinput Device pairing mode. The status LED will blink fast in orange.
3. On your device, select "Xbox Wireless Controller" from the available device list. The ATOM will connect.

[Diagram Description: Illustrates iOS/macOS Bluetooth settings showing available devices including "Xbox Wireless Controller".]

Option 2: Bluetooth® (Pro Controller)

1. Enable Bluetooth® on your iOS or macOS device.
2. Press and hold the Home (CRKD) Button for 3 seconds to enter pairing mode. The status LED will blink fast in white.
3. On your device, select "Pro Controller" from the available device list. The ATOM will connect.

[Diagram Description: Illustrates iOS/macOS Bluetooth settings showing available devices including "Pro Controller".]

Option 3: Wired USB (macOS)

1. Connect the controller directly to your macOS device via the USB connection.

Connecting to Android

Option 1: Bluetooth®

1. Enable Bluetooth® on your Android device.
2. Press and hold the Down Dpad + Home (CRKD) Button for 3 seconds to enter pairing mode. The status LED will blink CYAN.
3. On your device, select "Gamepad" from the available device list and press PAIR. The ATOM will pair with your Android device.

[Diagram Description: Illustrates Android Bluetooth settings showing "Pair new device" and selecting "Gamepad".]

Connecting to Multiple Devices & Switching

The ATOM can be connected to multiple devices. Follow the setup instructions for each device.

Note: ATOM cannot be connected to multiple devices using the same connection method (e.g., cannot connect to two PCs via Bluetooth simultaneously). Power OFF the ATOM before connecting it to a new device.

Switching Between Devices

If the ATOM is paired to multiple devices, you can switch between them using the following button combinations:

• Switch (Pro Controller): Press and hold Right Dpad + Home (CRKD) button.
• Xinput Device (PC / iOS / macOS): Press and hold Up Dpad + Home (CRKD) button.
• Android: Press and hold Down Dpad + Home (CRKD) button.

Note: The device the ATOM is switched to becomes the main device. Pressing the Home (CRKD) button will wake up the ATOM to the main device from an OFF status.

[Diagram Description: Shows controller Dpad and Home button combinations for switching between Switch, Xinput, and Android modes.]

Special Functions

The ATOM controller offers several special functions:

• Change Dpad to Function as Left Stick: Press and hold Left Dpad + Minus Button (-) for 5 seconds. The status LED will blink and then turn solid.
• Change Dpad to Function as Right Stick: Press and hold Right Dpad + Minus Button (-) for 5 seconds. The status LED will blink and then turn solid.
• Reset Dpad Function Back to Default: Press and hold Up Dpad + Minus Button (-) for 5 seconds. The status LED will blink and then turn solid.
• Switching X/Y and A/B Mapping: When connected as an Xinput Device, X/Y and A/B mappings are swapped. To switch these mappings, press and hold Down Dpad + Minus Button (-) for 5 seconds. The status LED will blink and then turn solid. To revert, press and hold Down Dpad + Minus Button (-) for 5 seconds.
• Screen Capture: Press the Minus (-) and Plus (+) buttons simultaneously for screen capture function on Switch.

Note: Any special function settings will reset to default after any power cycle.

[Diagram Description: Shows controller buttons highlighted for activating special functions like Dpad to stick mapping and X/Y A/B mapping.]

Play & Charge

The ATOM supports playing games while charging. Use the USB-C port to charge the controller. The Status LED will blink slowly while charging.

Note: The status LED will blink fast in red when the battery is low.

[Diagram Description: Shows the USB-C port on the controller being connected to a power source, with an arrow indicating charging.]

Tap and Collect

The ATOM features an RFID touchpoint. Use the CRKD app and an NFC-enabled smartphone to add the ATOM to your collection. The CRKD app provides detailed instructions and videos on how to use this feature. Scan the QR code to download the CRKD app.

[QR Code Description: A QR code is provided for downloading the CRKD app from the Apple App Store or Google Play Store.]

Download on the Apple Store

Get it on Google Play

Specifications

• USB Charging Cable: 125mm (4.9 inches)
• Wireless Connection: Bluetooth® 5.0
• Battery Type: Li-ion
• Battery Capacity: 180mAh
• Charging Time: Approximately 2 hours
• Play Hours: 8-10 hours
• Power Rating: DC 3.7V/10mA
• Input Voltage: 5.0V +/-0.2V
• Operating Temperature: -10°C to 60°C
• Radio Frequency: ISM 2.4G
• Frequency Band: 2402-2480MHz (1MHz bandwidth)
• Maximum Radio-Frequency Power: 0 dBm
• Mass: Approximately 19g

Design and specifications are subject to change without notice.

Customer Support & Warranty

For setup or usage questions, contact CRKD directly. The CRKD App offers informational support videos. Visit support online at crkd.gg/support.

For further assistance, contact the support team at support@crkd.gg.

Limited Warranty

CRKD warrants the product to the original consumer purchaser to be free from defects in materials and workmanship for 2 Years from the date of purchase. Details available at www.crkd.gg/warranty.

Australian Warranty

This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. If purchased in Australia or New Zealand, this product includes a one-year (12 months) warranty from the date of purchase. All warranty claims must be facilitated through the retailer of purchase.

Bluemouth Interactive:

• Address: Level 2, 2 Darling Street, South Yarra, VIC 3141, Australia
• Phone: (03) 9867 2666
• Email: Support@bluemouth.com.au
• Website: www.bluemouth.com.au

Use and Handling

• Ensure sufficient space around you before use.
• Grip the controller firmly to prevent it from slipping.
• If using a wired connection, ensure the cable does not obstruct people or objects and avoid pulling the cable from the console.

Exterior Protection

To prevent deterioration or discoloration:

• Avoid placing rubber or vinyl materials on the product exterior for extended periods.
• Clean the product with a soft, dry cloth. Do not use solvents or other chemicals.

Safety Precautions

• Do not handle damaged or leaking lithium-ion batteries.
• If battery material contacts eyes: Do not rub; flush immediately with clean water and seek medical attention.
• If battery material contacts skin or clothes: Rinse affected area with clean water. Consult a physician if inflammation or soreness develops.
• Avoid prolonged use. Take breaks approximately every 30 minutes.
• Stop use immediately if you experience discomfort or pain in your hands or arms. Consult a doctor if symptoms persist.
• This product is intended for use with hands only. Do not bring it into close contact with your head, face, or body.
• Never disassemble or modify the product.
• Do not expose the product to high temperatures, high humidity, or direct sunlight.
• Do not allow the product to come into contact with liquids.
• Do not place heavy objects on the product.
• Do not throw or drop the product, or subject it to strong physical shock.
• Do not touch ports or insert foreign objects into them.

Compliance Statements

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation.

ISED Statement (Canada)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.

EU Declaration of Conformity

Freemode Go LLC declares that this product follows the essential requirements and other provisions of EMC Directive 2014/30/EU and RED directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.crkd.gg/docs.

UKCA Mark

The UKCA mark is a declaration that the product meets applicable UK regulations for health, safety, and environmental protection.

WEEE Symbol

The crossed-out wheeled bin symbol indicates that this product must not be disposed of with regular household waste and needs to be taken to an appropriate collection point.

Regulatory Compliance Mark (Australia)

This mark indicates compliance with applicable ACMA regulatory arrangements, including electrical safety and electromagnetic compatibility (EMC).

© 2024 Freemode Go, LLC. All rights reserved. CRKD, ATOM, and the CRKD logos are trademarks of Freemode Go, LLC. All other trademarks are owned by their respective owners. THIS PRODUCT IS NOT ENDORSED OR LICENSED BY NINTENDO.