Product Overview
The CRAVOT MagRack X2 MAX is a robust and reliable hitch bike rack designed to securely transport up to two bicycles. This manual provides comprehensive instructions for assembly, installation, usage, and maintenance, ensuring a safe and enjoyable experience for your cycling adventures.
Parts List
Diagram showing individual parts with their corresponding numbers.
| Part# | Description | Qty | Required Tools (Not included) | ||
|---|---|---|---|---|---|
| Name | Imperial | Metric | |||
| 1 | Rotating Base | 1 | |||
| 2 | Bolt Assembly | 1 | Monkey Wrench | 24mm | |
| 3 | U-shaped Shock Absorption | 1 | Open Wrench | 11/16" | 17mm |
| 4 | Pin Lock | 1 | Open Wrench | 1/2" | 13mm |
| 5 | Front Wheel Holder | 2 | Hex Wrench | 6mm | |
| 6 | Tray | 2 | Adjustment Lever |
Installation Instructions
Diagram illustrating how to press the Adjustment Button to unfold the Bent Arm.
Folding Arm Operation: Press the Adjustment Button to unfold the Bent Arm in the direction shown in the picture. Note: No need to press the Adjustment Button when folding the bent arm assembly.
Step 1: Install Bent Arm and Rotating Base
Diagram showing the Bent Arm and Rotating Base being attached with the Bolt Assembly.
Install the Bent Arm and Rotating Base using the Bolt Assembly (Part 2).
Step 2: Adjust Angle and Assemble Front Wheel Holder
Diagram depicting the adjustment of the angle and the assembly of the Front Wheel Holder.
Adjust the angle and assemble the Front Wheel Holder (Part 5).
Step 3: Insert into Vehicle Receiver and Secure
Diagram showing the bike rack being inserted into a vehicle's hitch receiver and secured with a Pin Lock.
Insert the Bike Rack into the vehicle receiver. Place the Pin Lock (Part 4), through the Spring Washer and Flat Washer (if applicable) and the aligned holes. Insert the lock head and ensure it is securely fastened.
Folding Steps
Diagram illustrating holding the Handle Assembly and lowering the bike rack.
Step 1: Hold the Handle Assembly and lower the bike rack to the lowest position, making sure the gear is correct.
Usage Steps
Diagram illustrating the tightening of the U-shaped shock absorption mechanism.
Step 1: Reduce Vibrations
Tighten the nut on the U-shaped shock absorption (Part 3) mechanism to reduce vibrations.
Diagram showing the Adjustment Lever and indicating its adjustment mechanism (loosen counterclockwise, tighten clockwise).
Step 2: Adjust Adjustment Lever Position
The position of the Adjustment Lever can be adjusted according to your needs. Loosen it counterclockwise and tighten it clockwise.
Diagram showing a bicycle being mounted on the rack, with the front wheel against the holder and bent arms securing the wheels.
Step 3: Install Bicycle
Install the bicycle on the Bike Rack. Place the front wheel against the Front Wheel Holder (Part 5), and tighten the Bent Arms on both sides to ensure that the front and rear wheels of the bicycle are firmly fixed.
Diagram illustrating the three optional positions for the Front Wheel Holder.
The position of the Front Wheel Holder can be adjusted according to your needs. There are three optional positions.
Dimension and Technical Specifications
Diagram showing the overall dimensions of the bike rack.
Dimensions: 57.1 inches (height), 13 inches (width), 41.1 inches (depth).
| Technical Specification | Details |
|---|---|
| Maximum Load | Bikes under 200 lbs (90.7 kg) |
| Maximum bike wheelbase | 53 inches (134.6 cm) |
| Applicable Types of Hitched Bike | Electric Bike / Regular Bike |
| Exclusions | Not intended for use with mopeds, motorcycles, or 3-wheel bikes. |
| Applicable for tires width within | 5 inches (12.7 cm) |
| Model Name | CRAVOT MagRack X2 MAX |
| Description | 2" Hitch 2-Bike Rack |
| Material | Aluminum & Steel |
| Maximum Weight Capacity | 200 lbs (90.7 kg) |
| Applicable Vehicles | Vehicles with 2" receiver |
| Package Size | 59.3" x 15.8" x 14" (150.6 cm x 40.1 cm x 35.6 cm) |
| Package Weight | 105.8 LBS (47.99 kg) |
| Net weight | 89.3 LBS (40.5 kg) |
Warnings
- ⚠️ Do not overload beyond the bike rack's weight capacity of 200 lbs.
- ⚠️ Do not carry more than 2 bikes on the carrier.
- ⚠️ The bike rack is not intended for transporting humans or animals.
- ⚠️ If you are planning to load only one bike, it is recommended to place it in the position closest to the vehicle.
- ⚠️ All bikes must be secured properly before operating the vehicle.
- ⚠️ Make sure the front of the bike(s), when mounted, are at or above the bottom of the bumper to avoid damage to the bike(s).
- ⚠️ Do not carry flammable items on the bike rack.
- ⚠️ If using the bike rack to transport electric bikes, please remove the batteries from the bikes prior to transporting them. This will help reduce the weight supported by the carrier.
- ⚠️ During long trips, frequently check the straps and bike position, especially if traveling on rough terrain.
- ⚠️ Please do not make alterations to the product, as it can pose potential hazards to your safety.
CRAVOT Warranty Policy
Thank you for choosing CRAVOT. We are committed to providing you with quality products and exceptional service. This Limited Warranty Policy outlines the terms and conditions of our warranty support.
- Warranty Period: Each product is covered by a 1-year warranty from the date of purchase. Specific warranty details can be found in the product manual or on the CRAVOT website.
- Coverage: This warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty claims.
- Exclusions from Warranty: This warranty does not cover damages resulting from improper use, accidents, unauthorized repair or modifications, or normal wear and tear. Products outside the warranty period or not covered by this warranty may be repaired at a reasonable cost.
- Claiming Warranty Service: To claim warranty service, please contact CRAVOT customer service with your proof of purchase and a description of the issue.
- Repair/Replacement Policy: Qualifying products damaged due to non-human factors will be repaired or replaced free of charge within the warranty period. Replacement parts or products will function like new.
- State Law Considerations: This warranty provides specific legal rights, and you may have other rights that vary by state. Some states do not allow limitations on implied warranties or incidental/consequential damages.
- Disclaimer of Liability: CRAVOT is not responsible for any damages or losses resulting from improper operation or handling of the product. This includes personal injury, damage to property, or other losses due to non-compliance with instructions. The warranty does not apply to products resold as second-hand items.
Customer Support
Our customer support team is always ready to assist with any questions or concerns regarding CRAVOT products or services.
Please contact us through our provided contact methods:
- Website: cravot.com
- Email: support@cravot.com
Thank you for your support and trust in CRAVOT. We are committed to delivering high-quality products and ensuring your satisfaction with our services.
Thank You
THANK YOU FOR CHOOSING A CRAVOT HITCH BIKE RACK!
Version number at the bottom of the page.
Version: BRA4182250427
