Label Printer User Manual

Document Layout and Cover Page Specifications

The document is structured as a manual, with content divided into numbered sections covering tips, FAQs, status indicators, button operations, specifications, safety, and regulatory information. A visual representation of the cover page for a "Maintenance Guide" is presented, detailing printing specifications:

• Color: Black and white printing.
• Pantone Values: C(0%), M(0%), Y(0%), K(85%).
• Material: 80g writing paper.
• Process: Double-sided printing / folding.
• Page Size: 105 × 148mm.
• Printing Requirement: Cover on top.

01 Pro Tips

• Run the automatic label identification each time you change the label.
• Press the feeder button on the printer to skip a blank label.
• To run a self-test, press and hold the feeder button until the blue light flashes once.
• Avoid poor quality labels as they can damage the printer.
• Regularly clean the print head.
• If the paper is jammed and the blue light is flashing slowly, run the automatic label identification.
• Insert Label Printer into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system.

02 FAQ

Please visit our official website to check the FAQ file.

03 LED Status

04 Feeder Button Instruction

05 Specifications

06 Safety Notices

• The print head may be very hot after printing labels. Do not touch the print head.
• Do not bend the power cord excessively or place objects on the cord.
• Do not use the printer if you find any irregularities as these could result in fire or electrocution.
• Keep the printer out of reach of children.
• Use only approved accessories and do not try to disassemble or repair the unit yourself.
• Keep the printer away from water and other objects that could penetrate the components.
• Please unplug the printer when it is not in use for a long time.

Regulatory Compliance

ISED Warnings (Canada)

English

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

French

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.

ISED RF Exposure Statement (Canada)

English

This equipment complies with ISED Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body.

French

L'équipement est conforme à la limite d'exposition aux radiations de la ISED établie pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

FCC Warnings (United States)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC RF Exposure Statement (United States)

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body.