Hotpoint AH12E12D3B PTAC with Electric Heat
Model: AH12E12D3B
Description: Hotpoint® PTAC with Electric Heat, 20 amps, 230/208 Volt
Dimensions and Installation Information (in Inches)
Electrical Wiring
All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
Note: Aluminum wiring may pose special problems – consult a qualified electrician.
Grille Options
- Stamped Aluminum Grille – RAG70
Electrical Connection
- 230/208 volt units must be plugged into a receptacle.
- Installation must comply with local electrical codes and regulations.
- Power cord is permanently attached on all Hotpoint chassis.
Wall Case Dimensions
Diagram showing wall case dimensions for a PTAC unit. Labeled A, B, C.
RAB80 Wall Sleeve: Heavy-gauge galvanized steel, with insulation, for quick self-assembly.
- A – 42 inches
- B – 13-3/4 inches
- C – 16 inches
Maximum Cord Extension
Diagram indicating maximum cord extension lengths, showing 30 inches and 70 inches.
Wall Opening Dimensions
Add 1/4 inch to A and C dimensions for all cut-outs.
RAB80: 16-1/4 inches Minimum Height x 42-1/4 inches Minimum Width.
AH12 Electric Heater Specifications (230/208 Volt)
| Specification | Value (230/208 Volt) |
|---|---|
| Heater Watts | 3,500 / 2,897 |
| Heater BTU | 10,900 / 8,900 |
| Heater Amps | 15.3 / 13.7 |
| Min Circuit | 20 |
| Recommended Protective Device | 20 amp time-delay fuse or breaker |
Feature and Benefits
Diagram of a Hotpoint PTAC unit.
- 12,000 / 11,800 cooling BTU
- 10.7 EER
- R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential).
- 3-Speed Fan – Guests can control comfort with three fan speeds.
- 4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort.
- Intuitive Display – Allows guests to easily customize preferred settings and reduce maintenance calls with an easy-to-use control panel.
- Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation.
- Automatic Emergency Heat – Keeps guests comfortable with a heating option that uses electric resistance heat in heat pump mode.
- Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition.
- Auto Power Recovery – In case of power failures, units automatically resume operation when power restores, reducing maintenance calls.
- Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system.
- Backed by an Industry Leader – Hotpoint has a long history of creating durable products at an affordable price.
