Hotpoint AH12H09D3B PTAC Heat Pump Unit
with Electric Heat Backup, 20 amps, 230/208 Volt
Dimensions and Installation Information
Electrical Wiring
All wiring, including the installation of the receptacle, must be made in accordance with local electrical codes and regulations.
Note: Aluminum wiring may pose special problems; consult a qualified electrician.
Grille Options
- Stamped Aluminum Grille – RAG70
Electrical Connection
230/208 volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
The power cord is permanently attached on all Hotpoint chassis.
Wall Case Dimensions
Refer to the following diagram for wall case dimensions:
Diagram Description: A diagram showing a rectangular opening with dimensions labeled A, B, and C.
Wall Sleeve: RAB80 Wall Sleeve
Description: Heavy-gauge galvanized steel with insulation for quick self-assembly.
Dimensions: A – 42 inches, B – 13-3/4 inches, C – 16 inches.
Maximum Cord Extension
Diagram Description: A diagram illustrating cord extension, showing a 30-inch and a 70-inch measurement.
Wall Opening Dimensions
Add 1/4 inch to A and C dimensions for all cut-outs.
For RAB80 sleeve: Minimum Height 16-1/4 inches x Minimum Width 42-1/4 inches.
Electrical Specifications
AH12 Electric Heater (230/208 Volt Line Cord Connected Units)
| Specification | Value |
|---|---|
| Heater Watts | 3,500 / 2,897 |
| Heater BTU | 10,900 / 8,900 |
| Heater Amps | 15.3 / 13.7 |
| Min Circuit | 20 |
| Recommended Protective Device | 20 amp time-delay fuse or breaker |
AH12 Heat Pump
| Specification | Value |
|---|---|
| Heat Pump Watts | 720 / 690 |
| Heat Pump BTU | 8,400 / 8,200 |
| COP | 3.4 |
Features and Benefits
- 9,500 / 9,500 cooling BTU
- 11.4 EER
- 8,400 / 8,200 heating BTU
- 3.4 COP
- R32 Refrigerant: Environmentally friendly, low GWP (Global Warming Potential).
- 3-Speed Fan: Allows guests to control comfort with three fan speeds.
- 4-Temperature Limiting Options: Easily select one of four temperature ranges for peak efficiency and total customer comfort.
- Intuitive Display: Enables guests to easily customize preferred settings, reducing maintenance calls with an easy-to-use control panel.
- Power Cord (LCDI) Included: Hotpoint PTACs include everything needed for quick and easy installation.
- Automatic Emergency Heat: Provides a heating option using electric resistance heat in heat pump mode to keep guests comfortable.
- Freeze and Frost Protection: Automatic freeze and indoor frost control systems keep units operating in peak condition.
- Auto Power Recovery: Units automatically resume operation after power failures, reducing maintenance calls.
- Self Diagnostics: Quickly and easily identify service needs with a nine-point diagnostic code system.
- Backed by an Industry Leader: Hotpoint is a trusted PTAC brand, known for creating durable products at an affordable price.
Product Illustration Description: An image of the Hotpoint PTAC unit, typically a rectangular appliance designed for through-the-wall installation.
Preliminary Specifications – Subject to Change
