Moku Data Logger Series
Instrument Datasheets
Moku:Delta Data Logger
The Moku:Delta Data Logger features eight analog input channels with ultra-low noise performance (< 10 nV/√Hz). Data can be logged directly to the integrated 1 TB SSD or streamed to network storage via API at a rate of up to 10 MSa/s, making it ideal for high-speed, long-duration measurements. With GPS-disciplined timing and support for external 10 MHz and 100 MHz clock references, Moku:Delta delivers a flexible and precise solution for applications such as multi-channel sensor monitoring, quantum optics, and real-time experimental control.
Key Specifications:
- Number of Inputs: 8
- Acquisition Rate: 10 MSa/s to SSD
- Input Range: Up to 40 Vpp
- Onboard Storage: 1 TB SSD
- External Clock Reference Options: 10 MHz, 100 MHz, GPS
- Waveform Generator: 4 Channels Integrated
Features
- Log voltage data on eight independent channels to the internal 1 TB SSD
- Built-in four-channel signal generator, up to 2 GHz
- Onboard GPS receiver for GPS-disciplined oscillator capability
- Easily export data to computer, Dropbox, and other cloud-based services
- Schedule the log to start with a delay of up to 10 days, or by external triggered start
- Stream data directly to your computer using Moku APIs, including Python and MATLAB
Specifications
- Input ranges: 100 mVpp, 1 Vpp, 10 Vpp, or 40 Vpp
- Input Impedance: 50 Ω / 1 MΩ
- Input coupling: AC / DC
- Maximum acquisition rate: 10 MSa/s for 1 channel, 5 MSa/s for 2 channels, 2.5 MSa/s for 4 channels, 1.25 MSa/s for 8 channels
- Minimum acquisition rate: 10 Sa/s
- Acquisition mode: Normal (direct downsampling), Precision (improves resolution by averaging), Peak detect (captures high and low amplitude samples)
Applications
- Quantum optics
- Vibration analysis
- Environment monitoring
- Time-Correlated Single-Photon Counting (TCSPC)
- High-Frequency RF Signal Logging
Moku:Pro Data Logger
The Moku:Pro Data Logger enables you to log data to its 240 GB internal solid-state drive with sampling rates of up to 10 MSa/s. All four inputs are equipped with dual 10-bit and 18-bit ADCs which, with blended ADC technology, lowers input noise to 30 nV/√Hz at 100 Hz providing ultra-low noise data logging from acoustic to RF frequencies. Moku:Pro is also equipped with a 10 MHz clock synchronization I/O and four 500 MHz outputs, allowing flexible integration with other electronics. Data can be streamed live or downloaded for analysis once the measurement is complete.
Key Specifications:
- Number of Inputs: 4
- Acquisition Rate: 10 MSa/s to SSD
- Input Range: Up to 40 Vpp
- Input Coupling: AC or DC
- Input Impedance: 50 Ω / 1 MΩ
- Waveform Generator: Integrated
Features
- Log voltage data on four independent channels to its 240 GB SSD
- Built-in four-channel waveform generator, up to 500 MHz
- 10 MHz clock synchronization ports
- Easily export data to computer, Dropbox, and other cloud-based services
- Schedule your log to start with a delay of up to 10 days, or by external triggered start
- Stream data directly to your computer using Moku APIs, including for Python, MATLAB, and LabVIEW
Specifications
- Input ranges: 0.4 Vpp, 4 Vpp or 40 Vpp
- Input Impedance: 50 Ω / 1 MΩ
- Input coupling: AC/DC
- Maximum sampling rate: 10 MSa/s for 1 channel, 5 MSa/s for 2 channels, 2.5 MSa/s for 4 channels
- Minimum sampling rate: 10 Sa/s
- Acquisition mode: Normal (direct downsampling), Precision (improves resolution by averaging), Peak detect (displays high and low amplitude samples)
Applications
- Temperature monitoring
- Vibration analysis
- Environment monitoring
- Sensor logging
Moku:Lab Data Logger
The Moku:Lab Data Logger lets you log data directly to an SD card for long-term measurements at rates of up to 250 kSa/s, where the duration is limited only by the capacity of the SD card. Data saved to Moku:Lab can be uploaded to the cloud for analysis once the measurement is complete.
Key Specifications:
- Number of Inputs: 2
- Acquisition Rate: Up to 250 kSa/s
- Input Range: -5 V to 5 V
- Input Coupling: AC or DC
- Input Impedance: 50 Ω / 1 MΩ
- Waveform Generator: Integrated
Features
- Log voltage data on two independent channels to an SD card for long-term measurements
- Built-in two-channel 250 MHz waveform generators
- Easily export data to a computer, Dropbox, email, iCloud, or the iPad "My Files" folder
- Schedule a log to start after a delay of up to 10 days, or by external triggered start
- Stream data directly to your computer using Moku APIs, including Python, MATLAB, and LabVIEW
Specifications
- Input range: 1 Vpp or 10 Vpp
- Input impedance: 50 Ω or 1 MΩ
- Input coupling: AC/DC
- Maximum sampling rate to SD card: One channel: 250 kSa/s, Two channels: 125 kSa/s
- Minimum sampling rate: 10 Sa/s
- Acquisition mode: Normal (direct digitization at the acquisition rate), Precision mode (downsampling from 500 MSa/s by averaging)
Applications
- Environment monitoring
- Sensor logging
- Temperature monitoring
- Vibration analysis
Moku:Go 2-Channel Data Logger
The Moku:Go Data Logger enables you to log data up to 1 MSa/s directly to its internal memory. The versatile front ends allows the user to select between AC / DC couplings, and ± 5 V or ± 25 V input ranges based on the experiment. It also provides a user-configurable sampling rate along with duration and delay start options. Data can be streamed live or downloaded for analysis once the measurement is complete.
Key Specifications:
- Number of Inputs: 2
- Acquisition Rate: Up to 1 MSa/s
- Input Range: ± 5 V to ± 25 V
- Input Coupling: AC or DC
- Input Impedance: 1 MΩ
- Waveform Generator: Integrated
Features
- Log voltage data on two independent channels directly to the device
- Built-in two-channel 20 MHz waveform generator
- Easily download log files to your computer for analysis. Built-in conversion tool to convert the binary data to .csv, .mat, NumPy format
- Schedule your log to start on a delay of up to 10 days, or by external triggered start
- Stream data directly to your computer using Moku APIs, including for Python, MATLAB, and LabVIEW
Specifications
- Input range: 10 Vpp, or 50 Vpp
- Input Impedance: 1 MΩ
- Input coupling: AC/DC
- Maximum sampling rate: 1 MSa/s with 1 channel enabled, 500 kSa/s with 2 channels enabled
- Minimum sampling rate: 10 Sa/s
- Acquisition modes: Normal (direct digitization at the acquisition rate), Precision mode (downsampling from maximum sampling rate by averaging), Peak detect (displays high and low amplitude samples)
Applications
- Temperature monitoring
- Vibration analysis
- Environment monitoring
- Other sensor data recording
