Liquid Instruments Waveform Generator Datasheets
This document consolidates information from datasheets for various Liquid Instruments Waveform Generator models, providing a comprehensive overview of their capabilities.
Moku:Delta Waveform Generator
The Moku:Delta Waveform Generator offers six independent analog outputs at 10 GSa/s with up to 2 GHz bandwidth. It supports sine, square, ramp, pulse, noise, and DC waveforms with configurable frequency, amplitude, phase, and offset. Modulation options include AM, FM, PM, and PWM. Advanced triggering, multi-channel synchronization, and a GPS-disciplined clock enable precise waveform delivery for RF, quantum control, and timing-critical applications.
Key Specifications:
- Frequency Range: 1 mHz to 2 GHz
- Output Voltage Range: Up to 10 Vpp (50 Ω)
- Modulation: FM, AM, PM, PWM
- Other Modes: Burst, Sweep
- Timebase Accuracy: 1 ppb
Features:
- Six independent phase-coherent waveforms from DC to 2 GHz.
- Six built-in waveforms: sine, square, ramp, pulse, noise, and DC.
- Broadband FM, AM, PM, and PWM modulation with internal or external input.
- Versatile trigger options: from input, dedicated TTL trigger port, or another channel.
- Supported external clock reference: 10 MHz, 100 MHz, GPS.
Applications:
- Quantum control and readout
- RF system prototyping and testing
- Signal simulation
- Laser scanning microscopy
- Circuit design and characterization
- System synchronization
- Clock source
- Microwave photonics and electro-optic modulation
- Modulation scheme evaluation
Moku:Pro Waveform Generator
The Moku:Pro Waveform Generator generates four independent waveforms with a maximum bandwidth of 500 MHz. It supports sine, square, ramp, pulsed, noise, or DC waveform shapes. High-bandwidth modulation of phase, frequency, amplitude, and pulse width is possible, along with triggered bursts or sweeps from an internal or external source.
Key Specifications:
- Frequency Range: 1 mHz to 500 MHz
- Output Voltage Range: Up to 10 Vpp (50 Ω)
- Modulation: FM, AM, PM, PWM
- Other Modes: Burst, Sweep
- Timebase Accuracy: < 300 ppb
Features:
- Four independent phase-coherent waveforms from DC to 500 MHz.
- Six built-in waveforms: sine, square, ramp, pulse, noise, and DC.
- Broadband FM, AM, PM, and PWM modulation with internal or external input.
- Versatile trigger options: from input, dedicated TTL trigger port, or another channel.
- 10 MHz reference input and output.
Applications:
- Signal simulation
- Laser scanning microscopy
- Circuit design and characterization
- System synchronization
- Clock source
- DAC/Op-amp characterization
- Motor control
Moku:Lab Waveform Generator
The Moku:Lab Waveform Generator generates two independent waveforms with a sampling rate of 1 GSa/s and a maximum frequency of 250 MHz, with an output voltage range of 2 Vpp into 50 Ω. Users can select sine, square, ramp, pulsed, noise, or DC waveform shapes. It supports modulation of phase, frequency, amplitude, pulse width, and generation of triggered bursts or sweeps from an internal or external source.
Key Specifications:
- Frequency Range: DC to 250 MHz
- Sampling Rate: 500 MSa/s
- Resolution: 16 bit
- Output Voltage Range: 2 Vpp into 50 Ω
- Modulation: FM, AM, PM, PWM
- Other Modes: Burst, Sweep
Features:
- Two independent waveforms from DC to 250 MHz.
- Six built-in waveforms: sine, square, ramp, pulse, noise, and DC.
- Broadband FM, AM, PM, and PWM modulation with internal or external input.
- Versatile trigger options: from input, dedicated TTL trigger port, or the other output channel.
- 10 MHz reference input and output.
Applications:
- Signal simulation
- Laser scanning microscopy
- Circuit design and characterization
- System synchronization
- Clock source
- DAC/Op-amp characterization
- Motor control
Moku:Go Waveform Generator
The Moku:Go Waveform Generator generates two independent waveforms with a sampling rate of 125 MSa/s and a maximum frequency of 20 MHz, with an output voltage range up to 10 Vpp. It supports sine, square, ramp, pulsed, noise, or DC waveform shapes. High bandwidth modulation of phase, frequency, amplitude, and pulse width is supported, along with triggered bursts or sweeps from an internal or external source.
Key Specifications:
- Frequency Range: DC to 20 MHz
- Sampling Rate: 125 MSa/s
- Resolution: 12 bit
- Output Voltage Range: 10 Vpp
- Modulation: FM, AM, PM, PWM
- Other Modes: Burst, Sweep
Features:
- Two independent waveforms from DC to 20 MHz.
- Six built-in waveforms: sine, square, ramp, pulse, noise, and DC.
- FM, AM, PM, and PWM modulation with internal or external input.
- Versatile trigger options: from input, or the other output channel.
Applications:
- Signal simulation
- Circuit design and characterization
- System synchronization
- Clock source
- Op-amp characterization
- Motor drive
