Features
- Class-II design
- Design to meet IEC 60950-1, IEC 60065-1, IEC 62368-1, and EN 61558-1 safety standards
- Compact dimension: 3"x5"x1.126"
- No load power consumption less than 0.21W
- EN 55032 Class B radiated emission compliant
- High altitude 5000 meters operation
- OTP (Over Temperature Protection), Brown out protection
Description
This AC-DC switching power supply is a Class-II PSU, offering 65 watts of continuous power at convection cooling and 50°C operation temperature. It features low no-load power consumption (less than 0.21W) and is suitable for audio & video, display, household (Europe), information, and networking applications.
Safety Standard Approval
Design to meet IEC 60950-1, IEC 60065-1, IEC 62368-1, and EN 61558-1 safety standards. Approvals include CE, CB, UL, and CSA.
Specifications
Input Specifications
| Parameter | Value |
| Input voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input current | 1.7 A (rms) for 115 VAC, 0.8 A (rms) for 230 VAC |
| No load power consumption | ≤0.21A |
| Touch current | 250 µA max. @ 264 VAC, 63 Hz |
Output Specifications
| Model | Output Voltage | Min. Load | Max. Current | Tolerance | Ripple & Noise | Max. Power | Efficiency (115/230 Vac) |
| FSP065-P35-A05 | 5 V | 0 A | 13.0 A | ±3% | 100 mV | 65W | 84/86% |
| FSP065-P35-A12 | 12 V | 0 A | 5.42 A | ±3% | 120 mV | 65W | 87/88% |
| FSP065-P35-A24 | 24 V | 0 A | 2.71 A | ±3% | 240 mV | 65W | 87/88% |
General Specifications
| Parameter | Value |
| Efficiency | See rating chart |
| Power turn on time | 1.0 Sec maxi. |
| Hold-up time | 10 mS minimum @ 100% load & 115 VAC, 20 mS minimum @ 100% load & 230 VAC |
| Line regulation | ±0.5% maximum at full load |
| Inrush current | 55A @ 115VAC @ 25°C cold start, 100A @ 230 VAC @ 25°C cold start |
| Operating altitude | 5000 meters above sea level |
| Withstand voltage | 3000 VAC from input to output |
| Isolation Resistance | Input to output 100M ohm @ 500Vdc, 25°C |
| MTBF | 400,000 hours minimum at full load at 25°C ambient, calculated per BELL CORE SR-332 |
Environmental Specifications
| Parameter | Value |
| Operating temperature | -20°C~+70°C |
| Storage temperature | -40°C~+85°C |
| Operating humidity | 5% to 95% non-condensing |
| Derating | Derate from 100% at +50°C linearly to 50% at +70°C, applicable to convection cooling condition |
EMC Performance
| Standard | Compliance |
| EN55032 | Class B conducted, Class B radiated |
| FCC | Class B conducted, Class B radiated |
| VCCI | Class B conducted, Class B radiated |
| EN61000-3-2 | Harmonic distortion, class A |
| EN61000-3-3 | Line flicker |
| EN61000-4-2 | ESD, ±8 KV air and ±4 KV contact |
| EN61000-4-3 | Radiated immunity, 3 V/m |
| EN61000-4-4 | Fast transient/burst, ±1 KV |
| EN61000-4-5 | Surge, ±1 KV diff, ±2 KV com |
| EN61000-4-6 | Conducted immunity, 3 Vrms |
| EN61000-4-8 | Magnetic field immunity, 3 A/m |
| EN61000-4-11 | Voltage dip immunity, 240Vac: 30% reduction for 500 ms (criteria A), >95% reduction for 10 ms (criteria A), >95% reduction for 5000 mS (criteria B) |
Performance Curves
Input Voltage Derating Curve
The Input Voltage Derating Curve illustrates that the output power capability remains at 100% for input voltages ranging from approximately 90 VAC to 264 VAC.
Output Power Derating Curve
The Output Power Derating Curve shows that the power supply can operate at 100% of its rated load up to an ambient temperature of 50°C. Beyond 50°C, the output power capacity derates linearly, reaching approximately 50% at 70°C. The curve covers operating temperatures from -20°C to 70°C.
Mechanical Specifications
Dimensions
The power supply features compact dimensions of 3 inches (width) x 5 inches (length) x 1.126 inches (height). The mechanical diagrams provide a detailed layout, component placement, and mounting hole specifications.
Connector Pin Assignments
Input Connector (IN1)
| Pin No. | Function | Wafer |
| 1 | Line | MOLEX 09-65-2029 or equivalent |
| 2 | N/A | |
| 3 | Neutral |
Matting connector: MOLEX housing 09-91-0300, Crimp PIN 08-50-0105
Output Connector (CN200)
| Pin No. | Function | Wafer |
| 1, 2, 3 | Return | MOLEX 09-65-2068 or equivalent |
| 4, 5, 6 | V+ |
Matting connector: MOLEX housing 09-91-0600, Crimp PIN 08-50-0105
FG Pad Connector
FG pad matting connector: Tyco housing SPS-21T-250
