FEJKA Artificial Plant

Important Information

⚠️ Note on Wall Mounting Hardware:

As wall materials vary, screws and appropriate wall plugs for fixing the FEJKA plant to the wall are not included in the package. For advice on suitable screw systems and fasteners, please consult your local specialised dealer or hardware store.

The diagrams illustrate how to attach the plant, but the specific screws and wall plugs must be chosen based on your wall type (e.g., drywall, plaster, concrete).

Assembly Steps

Step 1: Connecting FEJKA Panels

The FEJKA artificial plant consists of modular panels that can be interconnected to create larger displays. To connect panels, align the interlocking tabs of one panel with the slots of another and press them together until they click securely. This process can be repeated to form the desired arrangement (e.g., a 2x2 grid, as shown on page 6).

Step 2: Mounting Small Sections

Once the panels are assembled into the desired configuration, they can be mounted to the wall. For a single panel or a small section (e.g., a 2x2 grid shown on page 7), use the provided mounting brackets. Position the bracket against the wall and align it with the designated mounting points on the FEJKA panel. Secure the bracket to the wall using appropriate screws and wall plugs (not included). The diagram on page 5 shows a single panel being mounted with a bracket secured by 2 screws. The diagram on page 7, step 2, shows a 2x2 section being mounted with 4 brackets, each secured by screws.

[Icon Explanation: The diagram includes a symbol of a fastener and a symbol indicating 'use appropriate hardware', signifying that specific wall-mounting hardware is required and not provided.]

Step 3: Mounting Larger Arrangements

For larger or more complex arrangements, continue connecting panels and then proceed with wall mounting. Distribute the mounting brackets evenly across the back of the assembled unit to ensure secure attachment. The diagrams on pages 7 and 8 illustrate mounting larger configurations, showing multiple attachment points.

[The diagram on page 7, step 3, shows a section being mounted with 2 brackets, each secured by screws.]

Step 4: Final Installation

Ensure all panels are securely connected and all mounting brackets are firmly attached to both the FEJKA unit and the wall. The "i" icon (ℹ️) on page 8 signifies important information or a final check.