FEJKA Artificial Potted Plant
Assembly Overview
This guide details the assembly of the FEJKA artificial potted plant. It includes identifying parts and following step-by-step instructions.
Initial diagrams show a person contemplating the parts [question mark] and then proceeding with assembly, referencing the IKEA brand.
Parts Included:
- 2x Artificial Leaf Sets
- 4x Artificial Leaf Sets
- 1x Base Trunk Section
- 1x Upper Trunk Section
Assembly Instructions
Step 1: Assemble Trunk
Connect the base trunk section (1x) with the upper trunk section (1x). The diagram shows the upper section being inserted into the lower section [arrow pointing down]. A close-up illustrates the connector mechanism.
Step 2: Attach Upper Leaf Branches
Attach two sets of artificial leaves (2x) to the top of the assembled trunk. Curved arrows [curved arrow] indicate attachment points.
Step 3: Attach Main Leaf Branches
Attach the remaining four sets of artificial leaves (4x) to the main trunk. Curved arrows [curved arrow] show these branches being connected to the lower and middle sections.
Step 4: Arrange Leaves
Gently arrange and shape the artificial leaves for a natural look. Arrows [curved arrow] indicate outward and upward movements to spread the foliage.
Important Information
Placement
The FEJKA artificial potted plant is suitable for indoor and outdoor use. A diagram shows a person placing the potted plant on a surface, with an upward arrow [arrow pointing up] indicating placement.
Handling Precautions
Important information is highlighted with an information symbol [information]. A diagram shows a person holding the plant with a prohibition symbol [prohibited] superimposed, indicating caution.
Manufacturer Details
Design and Quality IKEA of Sweden.
© Inter IKEA Systems B.V. 2020
Product Code: AA-2224422-2