Assembly Instructions
This guide provides step-by-step instructions for assembling the IKEA FEJKA artificial plant.
Components Included:
- 1x Potted plant base
- 1x Stem section
- 4x Artificial plant tops/branches
Assembly Steps
Step 1: Attach Stem
Take the potted plant base and the single stem section.
Diagram Description: The stem section has a connecting peg at its base. This peg is inserted into a hole at the top of the main trunk emerging from the pot. Two hands are shown holding the pieces steady during insertion.
Action: Insert the stem section into the potted base.
Step 2: Attach First Plant Top
Take one of the artificial plant tops.
Diagram Description: The plant top has a connecting peg. This peg is inserted into the top of the assembled stem. Two hands are shown holding the pieces steady.
Action: Attach the first plant top to the stem.
Step 3: Attach Second Plant Top
Take another artificial plant top.
Diagram Description: Similar to Step 2, this plant top is attached to the next available connection point on the main stem/trunk.
Action: Attach the second plant top.
Step 4: Attach Remaining Plant Tops
Take the remaining two artificial plant tops.
Diagram Description: Two plant tops are shown being attached to the upper part of the main trunk. The diagram indicates that two connection points are used, suggesting multiple branches are attached here.
Action: Attach the remaining two plant tops.
