BenQ XL2546K LCD Monitor Recycle Disassemble Instruction
(Dismantled Information)
General Information
Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU on waste electrical and electronic equipment (WEEE).
Materials and components with hazardous content: LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Product Name: LCD Monitor
Model No.: XL2546K
Product Images:
Front view of the BenQ XL2546K monitor, showing the screen and stand.
Rear view of the BenQ XL2546K monitor, showing the stand and ports.
Disassembly Tools
| Tool | Picture Description |
|---|---|
| Philips Screwdriver for M3 Screw | A red-handled Philips head screwdriver. |
| Nosed Pliers | A pair of red-handled nosed pliers. |
| Diagonal Cutting Pliers | A pair of red-handled diagonal cutting pliers. |
| Slotted screwdriver | A green-handled slotted head screwdriver. |
| Six Point Sockets | A yellow-handled socket wrench with a six-point socket. |
| Philips Screwdriver for M2.5 Screw | A red-handled Philips head screwdriver. |
| Knife | A utility knife with a retractable blade. |
Disassembly Process
-
Disassembly Stand
Image shows the rear of the monitor. A finger is pressing a release button on the stand to detach it from the monitor.
-
Unscrew
Image shows the rear of the monitor with four red squares highlighting the screws that need to be removed.
-
Disassembly RC
Image shows the rear casing of the monitor being removed.
-
Disassembly Ctrl_BD Cable
Image shows a hand disconnecting a cable from a circuit board.
-
Disassembly Internal Remove All Tapes
Image shows the internal components of the monitor, with tapes needing to be removed.
-
Disassembly all PCB.
Image shows a person holding a printed circuit board (PCB) that has been removed from the monitor.
Image shows two PCBs: one is a smaller control board, and the other is a larger power supply board.
-
Remove Panel
Image shows the front panel of the monitor, likely the LCD screen itself, after internal components have been removed.
-
Disassembly RC Control BD
Image shows the rear of the remote control board (RC) with its connected components.
-
Disassembly RC Hook Headphone
Image shows the rear casing of the monitor, highlighting a hook mechanism for headphones.
-
Disassembly Column
Image shows various components of the monitor's stand column laid out separately.
-
Disassembly BASE
Image shows the base components of the monitor stand, including a metal mounting plate and a plastic base, along with screws.
Disassembly Time
Total time: 30 minutes
