Edimax EW-7438RPn Mini WLAN Signal Extender User Manual
Table of Contents
I. Product Information
1. Package Contents
The package includes:
- Edimax EW-7438RPn Mini WLAN Signal Extender
- Multilingual Quick Installation Guide CD with User Manual
- Quick Installation Guide
- Access Key Card
2. System Requirements
WLAN Signal Extender/Wireless Bridge Mode:
- Existing 2.4 GHz wireless network
Access Point Mode:
- Cable router or DSL modem
For Configuration:
- A computer with a 2.4 GHz WLAN adapter supporting 802.11/b/g/n
- Web browser (Internet Explorer 8 or later, latest Google Chrome, Firefox, or Safari)
- Smartphone with iOS 4.3 or Android 4.x and later
3. Status LEDs
| LED | Color | Status | Description |
|---|---|---|---|
| Signal Strength | Green | Solid | Excellent Signal: 60–100% signal strength |
| Yellow | Slow Blinking | Good Signal: 40–60% signal strength | |
| Fast Blinking | Weak Signal: 0–40% signal strength | ||
| Not Lit | Signal not detected, disconnected, or LED is off | ||
| 2.4 GHz | Green | Solid | WLAN is active |
| Blinking | Data Transmission | ||
| Not Lit | WLAN is inactive or LED is off | ||
| Power | Green | Solid | WLAN Signal Extender is powered on |
| Blinking | Powering up or restoring to factory default settings | ||
| Not Lit | WLAN Signal Extender is powered off or LED is off | ||
| WPS | Green | Solid | WPS connection established (LED stays on for 5 minutes to indicate successful connection) |
| Blinking | WPS connection in progress (waiting for WPS device) | ||
| Not Lit | WPS is not active or LED is off | ||
| LAN | Green | Solid | LAN connection is established |
| Blinking | LAN activity (data sending or receiving) | ||
| Not Lit | LAN connection is not established |
Note: LEDs can be deactivated via the "Schedule" option in the browser-based configuration interface. When LEDs are deactivated, none will light up regardless of the extender's status.
II. Installation
The Edimax EW-7438RPn Mini supports three operating modes:
1. WLAN Signal Extender (Wi-Fi Extender)
The device wirelessly connects to your existing network and repeats the WLAN signal.
- Placement: For optimal performance, place the extender approximately halfway between your existing wireless router/access point and the area with poor reception. The extender must receive a good Wi-Fi signal from the router/access point.
2. WLAN Adapter/Wireless Bridge (Wi-Fi Adapter/Wi-Fi Bridge)
Connect an Ethernet device (e.g., game console, smart TV) to the extender via an Ethernet cable, and provide wireless internet access to that device.
- Placement: Place the device within WLAN coverage, near the wired network device.
3. WLAN Access Point (Wi-Fi Access Point)
Connect the device via Ethernet cable to your existing router, and provide wireless internet access to your network devices.
- Placement: Connect the device via Ethernet cable to your router.
Installation Steps:
- Plug the Edimax EW-7438RPn Mini into an electrical outlet.
- The green Power LED will blink while the extender is starting up. Once the green Power LED is solid, the device is ready for use.
- Connect your WLAN device to the SSID "EdimaxEXT.Setup**". The last two characters (**) are unique to your device. Ensure all Ethernet cables are disconnected from your computer if you are using one for setup.
- Open a web browser. If you are not automatically directed to the "Get Started" screen, enter the URL http://edimaxext.setup and click "Get Started" to begin the setup process.
- Select the operating mode for your Edimax EW-7438RPn Mini.
- Follow the on-screen instructions for your chosen mode to complete the installation.
- After installation, you can download the EdiRange app by scanning the QR code below or the one on the Access Key card. This app allows you to manage functions like scheduling WLAN activation/deactivation or enabling/disabling guest network access in Extender mode.
For advanced configuration, use the browser-based configuration interface at http://edimaxext.setup (refer to the user manual for detailed information).
QR Codes for EdiRange App:
- Android: [QR Code for Android App]
- iOS: [QR Code for iOS App]
If you cannot access http://edimaxext.setup, please ensure your computer is set to obtain an IP address dynamically. Refer to the user manual for more information.
III. Resetting the WLAN Signal Extender
If you encounter issues with your WLAN signal extender or wish to change its operating mode, you can restore it to factory default settings. This will reset all settings to their default values.
- Press and hold the WPS/Reset button for at least 10 seconds, until the green Power LED starts blinking. Then release the button.
- Wait for the WLAN signal extender to reboot. When the green Power LED is solid, the extender is ready for setup.
IV. WPS
If your wireless router/access point supports WPS (Wi-Fi Protected Setup), you can use this method to set up your WLAN signal extender.
- Activate the WPS function by pressing the WPS button on your wireless router/access point. (Please consult your wireless router/access point manual for instructions on how long to press the WPS button.)
- Within two minutes, press and hold the WPS button on the WLAN signal extender for two seconds. The green WPS LED on the extender should blink, indicating that WPS is active.
- The devices will establish a connection. The connection is successful when the green WPS LED stays lit for 5 minutes.
Declarations and Disposal
Declaration of Conformity
This device complies with directives 1995/95/EC and 2011/65/EC.
WEEE Directive and Product Disposal
At the end of its service life, this product should not be treated as household or other waste. It must be handed over to a collection point for the recycling of waste electrical and electronic equipment, or returned to the supplier for proper disposal.
Edimax Technology Co., Ltd.
No.3, Wu-Chuan 3rd Road, Wu-Gu, New Taipei City 24891, Taiwan
Email: support@edimax.com.tw
Warranty Card
Product: Edimax WLAN Signal Extender EW-7438RPn Mini
Item No.: 12 73 805
Warranty Statement:
The manufacturer guarantees the quality and flawless operation of the product for the warranty period, which begins upon delivery of the goods to the consumer. The warranty is valid within the territory of the Republic of Slovenia.
The warranty period for the product is 1 year.
Products sent for warranty claims will be returned repaired or replaced with an identical, new, and flawless product within a maximum of 45 days. Defects due to failure to follow the provided instructions, improper use, negligent handling of the product, and mechanical damage are excluded from the warranty conditions. The warranty does not exclude consumer rights arising from the seller's liability for product defects.
The manufacturer guarantees the availability of maintenance and spare parts for 3 years after the warranty expires.
Servicing is carried out by the manufacturer at the CONRAD ELECTRONIC SE headquarters, Klaus-Conrad-Strasse 1, Germany.
Send defective products to: Conrad Electronic d.o.o. k.d., Ljubljanska cesta 66, 1290 Grosuplje, along with the completed warranty card.
Seller:
Date of delivery and seller's stamp:
The warranty is valid from the date of product delivery, as proven by the attached, correctly completed warranty card.
Conrad Electronic d.o.o. k.d.
Ljubljanska c. 66, 1290 Grosuplje
Fax: 01/78 11 250, Tel: 01/78 11 248
www.conrad.si, info@conrad.si
