Edimax Wireless LAN Adapter Series

Product Information

Main Features

• Complies with 802.11n, 802.11g, and 802.11b standards.
• Provides extended coverage, reduced dead spots, and high throughput (up to 300Mbps with MIMO technology for 11n adapters).
• Supports WMM and WMM-PS (IEEE 802.11e QoS standard).
• Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), and WPA2 (AES with IEEE 802.1x) for enhanced security.
• Supports operating systems: Windows OS 2000/XP/Vista, MAC OS 10.4.x/10.5.x, and Linux.
• Supports WPS configuration button (EW-7717Un, EW-7727In only).
• Supports USB 2.0/1.1 interface (EW-7717Un, EW-7718Un, EW-7318Ug, EW-7318USg only).

Package Contents

Before using your wireless network card, please check if all items are present. Contact your dealer if any items are missing.

EW-7717Un / EW-7718Un

• Wireless USB Adapter x1
• USB Cable with Stand x1
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7318Ug

• Wireless USB Adapter x1
• USB Cable x1
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7318USg

• Wireless USB Adapter x1
• USB Cable x1
• 4dBi Antenna x1
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7108PCg / EW-7708Pn

• Wireless Cardbus Adapter x1
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7128g

• Wireless PCI Adapter x1
• Antenna with cable x1
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7727In

• Wireless PCI Adapter x1
• 3dBi Antenna x2
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7728In

• Wireless PCI Adapter x1
• 3dBi Antennas x3
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7738Pn

• Wireless ExpressCard x1
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

EW-7748In

• Wireless PCI Express Adapter x1
• 3dBi Antenna x3
• Quick Installation Guide x1
• CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1

Network Card Installation

Hardware Installation

For EW-7318Ug / EW-7318USg / EW-7717Un / EW-7718Un (USB Adapters):

1. Fasten the antennas to the antenna connectors on the network card by turning them clockwise. (This step is for EW-7318USg only).
2. Insert the USB wireless network card into an empty USB 2.0 port on your computer while the computer is switched on. If the card feels stuck, do not force it; flip the card over and try again.
3. When the 'Found New Hardware Wizard' appears, click 'Cancel'.

For EW-7128g / EW-7727In / EW-7728In / EW-7748In (PCI/PCI Express Adapters):

1. Turn off your computer, remove the case cover, and insert the wireless network card into an empty PCI slot (for EW-7128g/EW-7728In/EW-7727In) or PCI Express slot (for EW-7748In).
2. Fasten the antennas to the antenna connectors on the network card by turning them clockwise.
3. The antenna can be bent to suit your needs.
4. Turn the computer back on. When the 'Found New Hardware Wizard' message appears, click 'Cancel'.

For EW-7108PCg/ EW-7708Pn / EW-7738Pn (PCMCIA/ExpressCard Adapters):

1. Insert the wireless network card into an empty PCMCIA slot (for EW-7108PCg/EW-7708Pn) or ExpressCard slot (for EW-7738Pn) on your computer. This can be done while the computer is powered on or off. Do not force the card into the PCMCIA or ExpressCard slot; if it feels stuck, remove it, flip it upside down, and try again.
2. When the 'Found New Hardware Wizard' message appears on your computer, click 'Cancel'.

Software Installation

This wizard can run on Windows 2000/XP/Vista. The following procedures are demonstrated on Windows XP.

You can install the Wireless Adapter using the EZMAX Setup Wizard from the included CD-ROM. This wizard is a user-friendly tool for configuring your internet connection. Upon starting the EZMAX Setup Wizard, a welcome screen will appear, prompting you to select a language for configuration. The wizard will guide you through the network connection process. Specific instructions for the EZMAX Setup Wizard are not provided here.

If you lose the CD-ROM or prefer a traditional setup, follow the instructions in this quick installation guide.

Step 1: Execute the 'Edimax_xxxx_Setup.exe' program to install your wireless adapter. Read the end-user license agreement and click 'I accept the terms of the license agreement' followed by 'Next' to proceed.

Step 2: Choose the configuration tool. It is recommended to select 'Edimax Configuration Tool' for full access to the wireless network card's functions. Alternatively, for configuration using Windows XP or Vista's built-in tools, select 'Microsoft Zero Configuration Tool', then click 'Next'.

Step 3: For wireless compatibility, select 'Optimize for WiFi mode' and click 'Next'. For enhanced wireless performance, select 'Optimize for performance mode'. Note that wireless compatibility is not guaranteed in performance mode. Refer to the user manual for details on performance mode.

Step 4: When the 'InstallShield Wizard Complete' message appears, click 'Finish' to finalize the driver installation.

Connect to Wireless Access Point

Using the Configuration Utility to Connect to a Wireless Access Point:

Step 1: After installation, a wireless configuration utility icon will appear in the lower-right corner of your Windows desktop. Right-click the icon and select 'Launch Config Utilities'.

Step 2: The configuration utility will automatically scan for wireless access points. Select the access point you wish to connect to and click 'Connect'. If your desired access point is not listed, click 'Rescan'.

Step 3: If the wireless access point uses encryption, you will need to enter the WEP passphrase or WPA preshared key. Please obtain this information from the access point owner. Enter the correct key and click 'OK'. Incorrect keys will prevent connection.

Step 4: Once successfully connected to the wireless access point, a 'Connected' message will appear in the lower-left corner of the utility window. Click 'OK' to exit.

For advanced settings and other features of this wireless network card, please refer to the user manual included on the CD-ROM.

Compliance Information

Federal Communication Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) as of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacturer must therefore be followed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Romania, Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.

EU Countries not intended for use

None

Please check the declaration of conformity on www.edimax.com.

Compliance Marks: CE, FCC, N20379, PC