Edimax EW-7822UBE Quick Installation Guide

I. Windows Plug-and-Play Installation

[Diagram: Three steps for Plug-and-Play installation: 1. Insert USB adapter into computer. 2. Plug-and-Play recognition. 3. Connect to Wi-Fi network.]

I-1. Insert the USB Adapter

Insert the USB adapter into your computer.

I-2. Plug-and-Play

1. The Wi-Fi icon will be displayed on the right-bottom Windows taskbar if Plug-and-Play is supported. (Refer to III. FAQ -> Q1)
2. Click the Wi-Fi icon to connect to the Wi-Fi network. The Wi-Fi icon might be different depending on your OS version. [Wi-Fi icon example showing network status and time/date]

I-3. Select & Connect Wi-Fi Network

Select your Wi-Fi Network (SSID), click "Connect" and enter the password if it is required.

[Screenshot of Windows network connection interface showing available Wi-Fi networks, with a prompt to enter a network security key for the 'Edimax' network.]

II. Windows Driver Installation

[Diagram: Three steps for driver installation: 1. Insert USB adapter into computer. 2. Download & Install Driver. 3. Connect to Wi-Fi network.]

II-1. Insert the USB Adapter

Insert the USB adapter into your computer.

II-2. Download & Install the Driver

1. Please access the link below. Search the model name in the search box and download the driver: https://www.edimax.com/download
2. [Illustration showing a download page with a search box labeled 'Model no.' and a link 'How do I find the model number?'. Text indicates users should enter the model number or follow simple steps.]
3. Unzip the downloaded file and run the setup.exe. Follow the instructions to complete the driver installation.
4. [Screenshot of the Edimax USB Adapter Driver installation wizard, displaying 'Edimax USB Adapter Driver' and navigation buttons like '< Back', 'Next >', 'Cancel'.]

II-3. Connect to the Wi-Fi Network

Follow these steps to connect to your Wi-Fi network after driver installation:

1. Click the Wi-Fi icon on the Windows taskbar. The icon may vary depending on your OS version. [Wi-Fi icon]
2. Select your Wi-Fi network (SSID), connect, and enter the password if required. [Screenshot of Windows network connection interface showing available Wi-Fi networks, with a prompt to enter a network security key for the 'Edimax' network.]

III. Frequently Asked Question (FAQ)

Q1. Why the Wi-Fi icon doesn't display on the Windows taskbar?

A: Your computer may not support Plug-and-Play for this device. Please refer to section II-2 to download and install the driver, then try again.

IV. More Information

For more information, please visit our website:

https://www.edimax.com/download

You can also scan the QR code below or search for the model name on the website to find the relevant page.

[QR Code for Edimax download page]

[Illustration showing a download page search interface with a field for 'Model no.' and a search icon.]

V. Safety Instructions

The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details.

• This product is designed for indoor use only.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (e.g., by touching grounded bare metal) before touching the product.
• The device contains no user-serviceable parts. Do not attempt to service or disassemble the product.
• Do not spill food or liquid on your product and never push any objects into the openings.
• Do not use this product near water, areas with high humidity, or condensation.
• Keep the product away from radiators and other heat sources.
• This device is not designed to be operated by children.
• Always unplug the product from mains power before cleaning and use a dry lint-free cloth only.

VI. Simplified EU Declaration of Conformity

Hereby, Edimax Technology declares that the radio equipment type, Wi-Fi USB Adapter, is in compliance with Directive 2014/53/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://www.edimax.com/download/doc

[CE logo] [FCC logo] [EAC logo] [R-NZ logo]

Copyright and Legal Information

Copyright © Edimax Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.

Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.

Federal Communication Commission (FCC) Statements

Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical lap held operations with the device contacted directly to the human body to the back side of the notebook computer. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmitting.

FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet.

Transmitters in the 5.925-7.125 GHz band are prohibited from operating to control or communicate with unmanned aircraft systems.

Body SAR

This product meets applicable national SAR limits of 1.6W/kg. This specific maximum SAR values can be found in the section of this user guide. When carrying the product or using it while worn on your body, maintain a distance of 0.5cm from the body to ensure compliance with RF exposure requirements.

Edimax is responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

RED Compliance Statement

Compliance with 2014/53/EU Radio Equipment Directive (RED)

In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

A simplified DoC shall be provided as follows: Article 10(9)

Hereby, Edimax Technology Co., Ltd. declares that the radio equipment is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/

This device meets the EU RED requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European SAR is measured with this device at a separation of 0.5cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 0.5cm away from your body to ensure exposure levels remain at or below the as-tested levels.

For class 2 device (supporting WLAN 5GHz: 5150-5350 MHz): The device is restricted to indoor use only when operating in the 5150 to 5350 MHz and 5945-6425 MHz frequency range.

[Table of EU country codes: AT, BE, BG, HR, CY, CZ, DK, DE, EE, FI, FR, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK, UK(NI)]

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.

EU Countries Not Intended for Use

None

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. (Full text available in multiple languages including English, French, Czech, Polish, Romanian, Russian, Hungarian, Turkish, Ukrainian, Slovak, German, Spanish, Italian, Dutch, Portuguese, Norwegian, Swedish, Danish, Finnish).

[WEEE recycling symbol] WEEE Directive & Product Disposal: At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.