Introduction
This economical and environmentally friendly sprayer utilizes a high volume of air and low air pressure for superior paint misting. It is designed to reduce paint consumption while covering surfaces or objects effectively. Key features include multiple spray settings, a quick connect/disconnect function, and four included nozzles.
Specifications
Voltage rating: 120V AC
Amperage rating: 3.75A
Frequency rating: 60 Hz
Wattage: 450W
Fluid delivery type: Siphon
Nozzle size: 1.5, 1.8, 2.2 and 2.6 mm
Cup capacity: 1,200cc
Cup material: Polyethylene
Noise rating: 60 to 70 dB
Cord length: 6-1/2 ft
Cord type: SJT
Spray settings: Vertical, horizontal and round
Max. viscosity: 60 DIN-s
Weight: 2.8 lb
Includes: Viscosity cup, needle, cleaning brush and nozzles (4)
Standards: CU 72211540.01
Safety Precautions
Users must read and understand all instructions before operating the tool. Basic precautions should be followed to reduce the risk of personal injury and equipment damage. This manual contains important safety warnings, precautions, operating, inspection, and maintenance instructions.
Key safety areas covered include:
- Hazard Definitions (DANGER, WARNING, CAUTION, NOTICE)
- Work Area Safety
- Personal Safety (including Personal Protective Equipment and Personal Precautions)
- Specific Safety Precautions
- Electrical Safety
- Power Cord Safety
- Fire and Explosion Precautions
For more information, visit www.princessauto.com.
Operation and Maintenance
The tool operates using a moto-operated turbo blower system that pressurizes the container for coating material feed. It is compatible with various coating materials, including solvent-based and water-based lacquers, mordants, glazes, oils, varnishes, enamels, and paints. It is not compatible with facade paints, caustic solutions, acidic coating materials, flammable materials, or abrasive components.
Instructions are provided for preparing coating materials, setting the spray pattern (horizontal, vertical, circular), adjusting the coating material flow rate, aligning the suction tube for different surfaces, and preparing for spraying. Always ensure the tool is connected to a properly grounded and shock-proof socket.
