Before getting started:
- Stand 6-8 feet away from the TV and ensure there is a line of sight between the remote and the digital box.
- Make sure the TV and digital box are on.
Programming Steps:
- Turn on the device that you would like to program the remote for. This could be your TV or an amplifier.
- Set the volume of the digital box to 25 by using the remote volume button before you program a TV or amplifier.
- Press and hold the [Optik Button] for 3 seconds, until the green LED next to the OPTIK button on the remote control flashes twice.
- From the lists below, enter the 4-digit code for the brand of your TV or amplifier. The LED light beside the TV button will flash twice in red when a TV code is entered; and will flash twice in yellow when an amplifier code is entered.
Codes for TV Brand
| Brand | Code |
|---|---|
| Funai | 0011 |
| Insignia | 0021 |
| LG | 0015 |
| Panasonic | 0013 |
| Philips | 0019 |
| RCA | 0020 |
| Samsung | 0018 |
| Sanyo | 0012 |
| Sharp | 0014 |
| Sony | 0017 |
| Toshiba | 0016 |
| Vizio | 0010 |
| Other* | 0029 |
Codes for Amplifier Brands
| Brand | Code |
|---|---|
| Aiwa | 0070 |
| Bose | 0067 |
| Denon | 0063 |
| Harman/ Kardon | 0062 |
| Hitachi | 0071 |
| LG | 0065 |
| Onkyo | 0066 |
| Phillips | 0069 |
| Pioneer | 0068 |
| Samsung | 0064 |
| Sanyo | 0073 |
| Sharp | 0072 |
| Sony | 0060 |
| Yamaha | 0061 |
| Other* | 0079 |
Completing the Setup:
- Press and hold the [Power Button] until your TV or amplifier switches off.
- As soon as your TV or amplifier switches off, remove your finger from the [Power Button] and press the [OK Button] to confirm – the red TV light will flash twice.
- Now press the [Power Button] again to switch your TV or amplifier back on.
Quick tip:
To have your digital box and TV come on with a single button press, follow the steps below:
- Press and hold the [Optik Button] for 3 seconds, until the green LED on the remote control flashes twice.
- Enter code 0007. The green LED flashes twice.
This will then turn on both your digital box and TV (and amplifier if programmed).
To turn power sync off, enter code 0006 and the green LED will flash twice.
Remote Control Description:
The TELUS Slimline remote control is black and designed for ease of use. It features a TELUS logo at the bottom and the phrase "the future is friendly®". Above the main buttons, there are indicators labeled "LED Lights".
The primary buttons are arranged as follows:
- Top Section: Power [Power Button], OPTIK [Optik Button], Apps, Search, On.
- Middle Section: Control buttons including Record [Record Button], Demand [Demand Button], Info [Info Button], playback controls (Rewind [Rewind Button], Play/Pause [Play/Pause Button], Fast Forward [Fast Forward Button]), Menu [Menu Button], and PVR [PVR Button].
- Navigation Pad: A central directional pad with Up [Up Arrow], Down [Down Arrow], Left [Left Arrow], and Right [Right Arrow] navigation buttons, surrounding a prominent OK [OK Button].
- Below Navigation: Back [Back Button], Exit [Exit Button], and Guide [Guide Button].
- Lower Section: Volume Up/Down [Volume Up/Down Buttons], Channel Up/Down [Channel Up/Down Buttons], a numeric keypad (0-9), Mute [Mute Button], and Delete [Delete Button].
A callout on the remote indicates: "Tap to go back. Press and hold to exit." referring to the navigation pad.
