Getting Started
To begin, ensure you have the DJI Mimo app installed on your smartphone. You can download it by visiting the provided URL.
Action: Download the DJI Mimo App.
Setup Steps
Step 1: Prepare Your Phone
Adjust the phone clamp to fit your smartphone's width. Then, securely mount your phone into the clamp.
[Illustration of phone clamp adjustment and phone being mounted]
Step 2: Unfold and Stabilize
Unfold the gimbal arm. Extend the built-in tripod legs to set the gimbal upright on a stable surface.
[Illustration of gimbal unfolding and tripod setup]
Step 3: Connect and Pair
Attach your smartphone magnetically to the gimbal. Open the DJI Mimo app on your phone. Connect the gimbal to your phone via Bluetooth. The app will display your device name (e.g., 'OM7-xxxxxx').
[Illustration of magnetic phone attachment and Bluetooth pairing]
Step 4: Power On and Charge
Press and hold the Power/M button to turn the gimbal on or off (hold for 2 seconds). To charge, connect a USB-C cable to the charging port and a power source.
Power On/Off: Hold Power/M button [Power button icon] (2s)
Charging: Use USB-C cable [USB-C cable icon] to power source [Power outlet icon].
Product Overview
The DJI Osmo Mobile 7 consists of the following components:
Part Number | Description |
---|---|
1 | DJI OM Magnetic Phone Clamp 4 |
2 | Pan Motor |
3 | Status Panel |
4 | Zoom Slider |
5 | Joystick |
6 | 1/4"-20 UNC Port |
7 | Switch Button |
8 | Shutter/Record Button |
9 | Power/M Button |
10 | Tilt Motor |
11 | Roll Motor |
12 | Trigger |
13 | Charging Port (USB-C) |
14 | Built-in Tripod |
[Illustration of the DJI Osmo Mobile 7 with numbered parts corresponding to the table]
Support and Legal
For further assistance, contact DJI Support.
Website: https://s.dji.com/guide97
DJI is a trademark of DJI. OSMO is a trademark of DJI OSMO.
Copyright © 2025 DJI All Rights Reserved.
Product Code: YCBZSS00304903