Thermador T36BT915NS
36-INCH STAINLESS STEEL BUILT-IN FRENCH DOOR BOTTOM FREEZER
FREEDOM® COLLECTION, MASTERPIECE® SERIES HANDLES
General Properties
| Home Connect™ (Wi-Fi Enabled) | Yes |
| Reversible Door Swing | No |
| SoftClose® Door | Yes* |
| SoftClose® Drawers | Yes |
| Carbon Air Filter | Yes |
| Lighting | LED Sidewall and Theater Lighting |
| Adjustable Shelves - Refrigerator | 3 |
| Shelf Material | Glass w/Aluminum Profile |
| Full Extension Drawers @ 115° Door Opening Angle | Yes |
| Full Extension Drawers @ 90° Door Opening Angle | Yes |
| Adjustable Temperature Drawer | 1 |
| Humidity Managed Drawer | 1 |
| Door Bins - Refrigerator | 4 |
| Gallon Door Bins - Refrigerator | 2 |
| Defrost Process - Freezer | Frost-Free |
| Freezer Baskets | 2 |
| Ice Maker with Diamond Ice System | Yes |
| Door Open Alarms | Yes |
| Open Door Assist | Yes |
| SuperCool | Yes |
| SuperFreeze® | Yes |
| Special Modes | Sabbath, Economy, Vacation |
Capacity
| Total Capacity (cu. ft.) | 19.4 cu. ft. |
| Refrigerator Capacity (cu. ft.) | 13.9 cu. ft. |
| Freezer Capacity (cu. ft.) | 5.5 cu. ft. |
Technical Details
| Watts (W) | 350 W |
| Current (A) | 15 A |
| Volts (V) | 110-120 V |
| Frequency (Hz) | 60 Hz |
| Power Cord Length (in.) | 118 |
| Plug Type | 120V-3 Prong |
Dimensions & Weight
| Appliance Dimensions (H x W x D) (in.) | 83 3/4" x 35 3/4" x 24 3/4" |
| Required Cutout Size (H x W x D) (in.) | 84" x 36" x 25" |
| Net / Gross Weight (lbs) | 551 / 598 lbs |
Efficiency
| ENERGY STAR® Qualified | Yes |
| Annual Energy Consumption | 579 kWh |
Temperature Ranges
| Refrigerator | 36°F (2°C) to 46°F (8°C) |
| SuperCool | 36°F (2°C) for approximately 6 hours |
| Energy Saving (Economy) Mode | Refrigerator: 45°F (7°C), Freezer: 3°F (-16°C) |
| Freezer | -11°F (-24°C) to 7°F (-14°C) |
| SuperFreeze® | -22°F (-30°C) for approximately 52 hours |
Warranty
| Limited, Entire Appliance, Parts and Labor on Any Part of the Refrigerator that Fails Because of a Manufacturing Defect | 2 Year |
| Limited Warranty for Sealed Refrigeration System*; Parts and Labor | 3rd to 6th Year |
| Limited Warranty for Sealed Refrigeration System*; Parts Only | 7th to 12th Year |
| Limited Warranty for Stainless Steel Rust-Through | Lifetime |
*Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and connection tubing.
Cutout Dimensions
36" (914 mm)
84"-85 1/16" (2134 mm-2164 mm)
min. 4" (102 mm)
4" (102 mm)
Furniture return
- A: Area for installation of power connection.
- B: Area for running the water line. It is recommended that the waterbox is placed adjacent to the installation cavity, so that it can be accessed for service without uninstalling the appliance. If this is not possible, place the recessed waterbox adjacent to the water supply socket elevated at the heights as referenced in areas A and B.
- C: Niche depth depends on kitchen design. For a flush installation, the depth needs to be at least 24 inches plus the thickness of the door panel.
Stainless steel models contain a panel-ready base unit, ready-to-install stainless steel door(s) with a right or left door swing and handle(s).
Top View Clearance
36" (914 mm)
24" (610 mm)
17 13/16" (452 mm)
17 13/16" (452 mm)
20 15/16" (530 mm)
** door handle must be added to this dimension.
90°
115°
Frame
3/4" (19 mm)
7/16" (11 mm)
1/8" (3 mm)
1/8" (3 mm)
** 9 1/4" (235 mm)
** 9 1/4" (235 mm)
Product and Panel Dimensions
35 3/4" (908 mm)
24" (610 mm)
17 13/16" (452 mm) 17 13/16" (452 mm)
84" (2134 mm)
79 7/8" (2029 mm)
51 3/8" (1304 mm)
7 1/8" (181 mm)
2 13/16"-4 3/16" (72-106 mm)
24" (610 mm)
35 3/4" (908 mm)
4" (102 mm)
4" (102 mm)
35 3/4" (908 mm)
1/8" (3 mm)
28 7/16" (722 mm)
variable water- connection at the appliance
Accessories (Optional)
Storage
- 3DHFGALBIN: French Door Half Gallon Bin
- SPRODBIN10: Small Produce Bin
- 3DPRODRAIL: French Door Produce Railing
Filters
- REPLFLTR55: Freedom® Water Filter Replacement water filter for use in all freezer and bottom freezer models
Other
- FRAMEKIT10: Freedom® Frame Kit. For any custom column installation in 24-inch deep cutouts. With two metal side trims whose placement between the interior cutout wall and the appliance helps overcome the challenge of unfinished cabinet returns.
- HEATRKIT20: 13W @ 120V Freedom® Heater Kit. When two appliances are installed side-by-side, a sealing kit must be used. For combinations that involve a freezer column, this sealing kit is included. For all other (non-traditional, i.e. two wine columns, two bottom freezers, etc.) side-by-side combinations or instances where any appliances are installed less than 6-inches (152 mm) apart from one another but not connected side-by-side, purchase this kit. This kit is recommended for use with any installation in areas that are subject to humidity, or located next to an outside wall.
