Thermador T24UR925DS Under-Counter Double Drawer Refrigerator

General Properties

• SoftClose® Drawers: Yes
• Lighting: LED Lighting
• Customizable Aluminum Dividers / Shelving: Yes
• Removable Drawer Mats: Yes
• Full Extension Drawers: Yes
• Drawer Open Alarm: Yes
• Quick Chill: Yes
• Touch Electronic Controls: Yes
• STAR-X Certified Sabbath Mode: Yes

Capacity

• Total Capacity (cu. ft.): 4.4 cu. ft.

Temperature Ranges

• Refrigerator: 33°F (0.5°C) to 64°F (14.5°C)
• Pre-Set Cooling Modes: Refrigerator 37°F (3°C), Pantry 44°F (6.6°C), Bar 34°F (1°C)
• Quick Chill: Refrigerator 33°F (0.5°C) for approximately 24 hours

Technical Details

• Watts (W): 150 W
• Current (A): 15 Amp
• Volts (V): 115 V
• Frequency (Hz): 60 Hz
• Power Cord Length (in.): 60"
• Plug Type: 120V 3-Wire

Dimensions & Weight

• Appliance Dimensions (H x W x D) (in.): 34 1/8" x 23 7/8" x 23 5/8"
• Required Cutout Size (H x W x D) (in.): 34 1/2"-35 1/8" x 24" x 24"
• Net / Gross Weight (lbs.): 138 / 149 lbs.

Efficiency

• ENERGY STAR® Qualified: Yes
• Annual Energy Consumption: 269 kWh

Warranty

• Limited, Entire Appliance, Parts and Labor on any Part of the Refrigerator that Fails Because of a Manufacturing Defect: 2 Year
• Limited Warranty for Sealed Refrigeration System*; Parts and Labor 3rd to 6th Year
• Limited Warranty for Sealed Refrigeration System*; Parts Only 7th to 12th Year

*Height adjustable + 1/2" (13 mm) with legs fully extended

**Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and connection tubing

Available Models

• T24UR915DS – With Masterpiece® Series Handle
• T24UR905DP – Custom Panel-Ready

Features & Benefits

• Customizable cooling modes - Refrigerator, Pantry and Bar
• SoftClose® drawers for ultra-smooth closing
• Customizable drawer dividers and shelving
• Quick Chill
• LED Lighting
• Drawer mats keep items from sliding and remove for easy cleaning
• Touch electronic controls for temperature management

Product Dimensions

A visual representation of the refrigerator's external dimensions is provided, showing height, width, and depth. Top view and front view diagrams illustrate the overall size and proportions.

Cutout Dimensions

Diagrams detail the required cutout dimensions for installation, including height, width, and depth. It specifies the minimum and recommended dimensions for the counter opening and the placement of the unit within the cutout. A top view illustrates the cutout for flush installation.

Clearance Dimensions

Illustrations show the necessary clearance space around the refrigerator for proper ventilation and operation. This includes top, side, and back clearances, as well as the dimensions for the electrical connection and recommended outlet location.

Side-by-Side Installation

A top-view diagram demonstrates the side-by-side installation of two units, indicating the combined width and spacing requirements.

Electrical Location

Details the recommended area for electrical installation, including the size of the hole for the power cord and its location at the base of the appliance. It also advises on outlet placement for flush installations.

Important Notes

Information regarding warranty terms, legal rights, and the importance of referring to the Use & Care manual for complete details. It also states that specifications are for planning purposes only and Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada, and Thermador is not responsible for products transported from the U.S. for use in Canada.

Contact Information

• USA: 1 800 735 4328 | THERMADOR.COM
• CANADA: THERMADOR.CA

©2021 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.