Thermador T36IT900NP: Builder Quote Product Planning Specs
Important: Information is preliminary and should be used for planning purposes only. Consult with your BSH Builder Sales rep or Thermador.com for final specifications.
Thermador T36IT900NP
36-INCH BUILT-IN FRENCH DOOR BOTTOM FREEZER
FREEDOM® COLLECTION, PANEL-READY
AVAILABLE OCTOBER 2017
Image shown is not final
GENERAL PROPERTIES
| Panel Ready | Yes |
| Reversible Door Swing | No |
| SoftClose® Drawers | Yes |
| Carbon Air Filter | Yes |
| Lighting | New Bar ALL LED Sidewall and Theater Lighting |
| Full Width / Adjustable Shelves | Yes / Yes |
| Freezer Shelves | 0 |
| Shelf Material | Glass w/Aluminum Profile |
| Full Extension Drawers @ 115° Door Opening Angle | Yes |
| Full Extension Drawers @ 90° Door Opening Angle | Yes |
| Temperature / Humidity Controlled Drawer | 0 / 1 |
| General Use Drawer | 1 |
| Door / Gallon Bins | 2 / 1 |
| Delicate Produce Bins | 2 Small |
| External LED Proximity Sensor | No |
| Oversized Dispenser Opening | No |
| Chilled Water, Crushed and Cubed Ice | No |
| Rapid Water Replenishment System | No |
| Ice Maker with Diamond Ice System | Yes |
| Door Open Alarms | Yes |
| Open Door Assist | Yes |
| Special Modes | Yes |
FEATURES & BENEFITS
- Freedom® Hinge enables true flush design
- Open Door Assist: automatic door opening with just a slight push or a pull
- Delicate Produce Bins for expanded storage
- ThermaFresh System, Humidity and Temperature controlled drawers
- SoftClose® Drawers and Produce Bins for easy and controlled storage
- Sleek clean design for the perfect symmetry when paired with additional columns
- TFT control panel managing all your columns functions
TEMPERATURE RANGES
| Refrigerator | 35°F (2°C) to 46°F (8°C) |
| Freezer | -9°F (-23°C) to 7°F (-14°C) |
| Super Freeze | -9°F (-23°C) for approximately 52 hours |
| Super Cool | 35.5°F (2°C) for approximately 9 hours |
CAPACITY
| Total Unit Gross Capacity (cu. ft.) – AHAM | 19.8 cu. ft. |
| Freezer Gross Capacity (cu. ft.) | 5.8 cu. ft. |
| Refrigerator Gross Capacity (cu. ft.) | 14 cu. ft. |
TECHNICAL DETAILS
| Watts (W) | 588 W |
| Current (A) | 15 A |
| Volts (V) | 120 V - 3 prong |
| Frequency (Hz) | 60 Hz |
| Power Cord Length (in.) | 139 |
| Plug Type | 120V-3 Prong |
DIMENSIONS & WEIGHT
| Appliance Dimensions (H x W x D) (in.) | 84" x 35 3/4" x 24 3/4" |
| Required Cutout Size (H x W x D) (in.) | 84" x 36" x 24" or 25" |
| Net / Gross Weight (lbs) | 454 / 496 lbs |
EFFICIENCY
| ENERGY STAR® Qualified | Yes |
| Annual Energy Consumption | 585 |
*Height adjustable +/- 1/2" (+/-13 mm)
**Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and connection tubing
WARRANTY
| Limited, Entire Appliance, Parts and Labor on Any Part of the Refrigerator that Fails Because of a Manufacturing Defect | 2 Year |
| Limited Warranty for Sealed Refrigeration System*; Parts and Labor | 3rd to 6th Year |
| Limited Warranty for Sealed Refrigeration System*; Parts Only | 7th to 12th Year |
| Limited Warranty for Stainless Steel Rust-Through | Lifetime |
CUTOUT DIMENSIONS
A: Area for installation of power connection.
B: Area for running the water line. It is recommended that the waterbox is placed adjacent to the installation cavity, so that it can be accessed for service without uninstalling the appliance. If this is not possible, place the recessed waterbox adjacent to the water supply socket elevated at the heights as referenced in areas A and B.
C: Niche depth depends on kitchen design.
Diagram Description: The diagram shows a side view of the refrigerator cutout dimensions. Key measurements include the overall height of 84" (2134 mm), width of 36" (914 mm), and depth. Specific areas A, B, and C are indicated for power connection, water line, and niche depth respectively. Area A requires a minimum of 4" (102 mm). A 5 1/8" (130 mm) depth is shown for the water line area, with a 4" (102 mm) clearance.
TOP VIEW CLEARANCE
Diagram Description: The diagram illustrates the top view clearance required for the refrigerator, particularly around the door swing and furniture integration. It shows a 36" (914 mm) width. Clearances of 24" (610 mm) and 9 1/4" (235 mm) are indicated. The door handle clearance is noted as needing to be added to the 9 1/4" dimension. A 115° door opening angle is specified. A note indicates that the 3/4" (19 mm) clearance is relevant for the stainless steel door, depending on the thickness of the furniture door, and is a special accessory.
PANEL DIMENSIONS
Diagram Description: This diagram provides detailed panel dimensions for the refrigerator. It shows the overall height of 84" (2134 mm) and width of 35 3/4" (908 mm). The depth is shown as 24" (610 mm). Specific measurements for the door panels are provided, including 17 13/16" (452 mm) for each section of the French door. The bottom freezer drawer depth is indicated. A variable water connection is shown at the appliance, with a 1/8" (3 mm) clearance and a 28 7/16" (722 mm) dimension related to the water connection area.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2017 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
