Nextivity SHIELD MegaFi 2 Software Guide

Introduction

This guide provides essential information for operating and configuring the Nextivity SHIELD MegaFi 2 wireless WAN HPUE router using its Mission Control software. It covers accessing, navigating, and managing the device's settings, including basic and advanced configurations.

For assistance with implementation or installation, please refer to the separate SHIELD MegaFi 2 User Guide.

The document is structured into four parts: Introduction, Mission Control, Basic Configuration Settings, and Expert Configuration Settings (forthcoming). It assumes users have basic computer skills and networking knowledge.

Mission Control Overview

Mission Control is the built-in web interface for the SHIELD MegaFi 2, allowing users to configure and manage the device. Access is typically through a web browser via an Ethernet connection or Wi-Fi. Remote access is also available through MegaPortal.

Key Features and Configurations

Accessing Mission Control via Ethernet connection.
Configuring network settings such as APN and LAN IP address.
Managing firmware updates, backups, and password changes.
Utilizing advanced features like NAT vs. Passthrough mode, Band Lock, and SSH access.
Configuring GPS output and WAN/LAN port modes.

Support Information

For any support issues, clarification, feedback, or recommendations, Nextivity's support desk can be contacted at support@nextivityinc.com. For additional assistance, call +1 (858) 485-9442 (Option 1) during business hours (6:00 AM – 5:00 PM PST).

	Nextivity SHIELD MegaFi 2 Software Guide: Configuration and Operation This software guide from Nextivity details the SHIELD MegaFi 2 wireless WAN HPUE router. It covers accessing and using the Mission Control interface for configuration, network management, firmware updates, and advanced settings.
	SHIELD MegaFi 2 Software Guide: Configuration and Operation A comprehensive guide to configuring and operating the Nextivity SHIELD MegaFi 2 wireless WAN HPUE router using the Mission Control software. Covers initial setup, network settings, firmware updates, security, and advanced features.
	Nextivity SHIELD MegaFi Fixed Kit Quick Start Guide: Setup and Configuration A quick start guide for setting up and configuring the Nextivity SHIELD MegaFi Fixed Kit router, including SIM installation, antenna connection, power setup, and cloud connectivity.
	Nextivity MegaPortal Guide A comprehensive guide to setting up, managing, monitoring, and maintaining Nextivity High Power User Equipment (HPUE) devices using the Nextivity MegaPortal cloud platform.
	Nextivity SHIELD MegaGo 2 Quick Start Guide A quick start guide for the Nextivity SHIELD MegaGo 2, detailing setup, connection, and usage instructions for the high-power mobile hotspot.
	CEL FI COMPASS SAR Test Report This SAR test report details the Specific Absorption Rate (SAR) testing for the CEL FI COMPASS device, ensuring compliance with FCC regulations (47 CFR Part2) and IEEE standards (C95.1, 1528) for human exposure to radio frequency energy.
	Nextivity SMART SERVER ANTENNA Module Data Sheet Data sheet for the Nextivity SMART SERVER ANTENNA Module, detailing its features, electrical specifications, interface, mechanical properties, compliance, and ordering information for cellular and public safety systems.
	Cel-Fi Roam R41 Signal Repeater Installation and User Guide \| Nextivity Comprehensive installation and user guide for the Nextivity Cel-Fi Roam R41 signal repeater. Learn how to install, set up, and troubleshoot your mobile signal booster for vehicles and small spaces.