Livarno Home LED Ground Lights

Intended Use

These LED ground lights (hereinafter called "product") are used for effect lighting indoors or outdoors.

Suitable

• Private use

Not suitable

• Industrial/commercial purposes
• Use in tropical climates

Any other use is considered improper. Any claims resulting from improper use or due to unauthorised modification of the product will be considered unwarranted. Any such use is at your own risk.

You Will Need

Gateway: (Sold separately. Please visit Lidl website for further details)

Router: 2.4 GHz, IEEE 802.11b/g/n [Wi-Fi Symbol]

Mobile device: iOS 9.0 or higher, Android 5.0 or higher [Mobile Device Symbol]

The Lidl Home app [Lidl Home App Icon] is required to control and set up the product.

Scope of Delivery

Fig. A:

• 1 LED ground lights
• 1 LED controller
• 1 Power adaptor
• 5 Ground spike
• 1 Quick start guide
• 1 Safety instructions

Description of Parts

Diagram showing the components of the LED ground lights. It labels the parts as: 1 LED, 2 Ground spike, 3 DC plug (lamp), 4 Cap nut (lamp), 5 DC socket (LED controller), 6 LED controller, 7 Cap nut (LED controller), 8 DC plug (LED controller), 9 DC socket (power adaptor), 10 Power adaptor. Two configurations, HG08383A and HG08383B, are illustrated, showing multiple LED units connected by a cable.

Technical Data

LED ground lights

• Input voltage/power: 24 V ===, 7.7 W
• Frequency band: 2405 to 2480 MHz
• Max. transmitted power: 13 dBm
• Communication protocol: ZigBee 3.0
• Reception range: approx. 70 m (free area)
• Dimension of light (without ground spike): HG08383A: 15 x 9.2 cm (Ø x H), HG08383B: 12 x 11.2 cm (Ø x H)
• Ingress protection: IP44 (Splash-proof)

This product contains a light source of energy efficiency class F.

LED controller

• Model number: ST-ZIGBEE-01
• Input voltage: 24 V ===
• Input current: 500 mA
• Input power: 12 W
• Ingress protection: IP44 (Splash-proof)

Power adaptor

• Model number: XY12LF-240050VH-ET
• Input voltage: 220-240 V~
• Input AC frequency: 50/60 Hz
• Output voltage: 24 V ===
• Output current: 0.5 A
• Output power: 12 W
• Protection class: II
• Ingress protection: IP44 (Splash-proof)

LED ground lights + Power adaptor

• Total power consumption: 8 W

Trademark Notices

iOS and Apple are registered trademarks of Apple Inc. in the USA and other countries. App Store is a registered trademark of Apple Inc.

Android, Gmail, Google Play and Google Assistant* are registered trademarks of Google Inc.

Windows and Windows 7 / 8 / 10 / XP are registered trademarks of Microsoft Corporation in the USA and other countries.

* Zigbee is a registered trademark of The Zigbee Alliance.

USB® is a registered trademark of USB Implementers Forum, Inc.

The Livarno Home trademark and trade name is the property of their respective owners.

Any other names and products may be trademarks or registered trademarks of their respective owners.

Google Assistant is not available in certain languages and countries.

Installation

Ground spike

Diagram illustrating the connection of the LED unit (labeled 1) to the ground spike (labeled 2), with an arrow indicating insertion into the ground.

Connections

Diagram showing electrical connections. It illustrates connecting the DC plug [3] to the DC socket [5] and securing with cap nut [4], and connecting DC plug [8] to DC socket [9] and securing with cap nut [7].

Placement

Diagram showing the placement of the LED ground lights. It depicts the ground spikes [2] being inserted into the soil.

1. Connect the LED [1] to the ground spike [2] (Fig. B).
2. Connect the DC plug [3] with the DC socket [5]. Ensure gaskets are properly installed. Fasten cap nut [4] clockwise (Fig. C).
3. Connect the DC plug [8] with the DC socket [9]. Ensure gaskets are properly installed. Fasten cap nut [7] clockwise (Fig. C).
4. Place the product at the desired location. Insert the ground spike [2] into the ground (Fig. D).
5. Connect the power adaptor [10] with a socket-outlet.
6. The product is switched on and ready for use.

Pairing Product and Mobile Device

NOTES:

Screenshots are from the iOS 13.3 app version (if not otherwise marked). Older iOS versions may have functional limitations.

The Android version of the app follows the same principles as the iOS version; discrepancies may occur.

Firmware updates might change app functionality.

Updated manual available via: Tap {Me} tab -> {User Manual}.

Preparation

Install Lidl Home app and set up Gateway (refer to Gateway instruction manual).

1. Connect power plug [10] to socket-outlet. LED [1] flashes slowly, ready for pairing.
2. Open Lidl Home app.
3. Tap {Home} tab -> (add further devices).
4. Select category: {Lighting}.
5. Select: LED ground lights (iOS/Android: {LED Light Chain}).
6. Select Gateway (if more than one is present).
7. Follow app instructions.
8. Connection established.
9. Name the product: Tap and enter a name.
10. Tap a room to set product location (selected room is grayed out). If multiple products are connected, you can rename and define their location.
11. Tap {Done}.
12. Pairing complete.
13. Return to home screen: Tap {<}.

Unpairing Product from Mobile Device

1. Open Lidl Home app.
2. Tap {Home} tab -> {LED Light Chain}.
3. Tap [Edit Icon].
4. Tap {Remove Device}.
5. Select: {Disconnect} or {Disconnect and wipe data} (see "Additional functions" in full manual).
6. Tap {Confirm}.

Switching On/Off

Tap [Power Symbol].

Resetting Product Manually

1. Switch on/off 3 times by connecting/disconnecting the power plug.
2. Switch on. LED [1] flashes slowly. Reset successful.

ℹ️ This function only resets local data. For cloud data reset, use the app (see "Additional functions", {Disconnect and wipe data} in the full manual).

Disposal

Before passing on, disposing of, or returning the product, ensure all data is deleted from the product and cloud. Refer to the full manual: "Additional functions" -> {Disconnect and wipe data}.

Packaging is made of recyclable materials. Dispose of at local recycling facilities.

Observe packaging markings for waste separation: (a) abbreviations, (b) numbers: 1-7 plastics / 20-22 paper and fibreboard / 80-98 composite materials.

Product and packaging are recyclable; sort separately for better waste treatment.

Triman logo is valid only for France.

Contact local authorities for disposal information.

To protect the environment, do not dispose of the product in household waste. Ensure proper disposal. Information on collection points and opening hours is available from local authorities.

Simplified EU Declaration of Conformity

OWIM GmbH & Co. KG, Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY declares that the product LED GROUND LIGHTS, HG08383A / HG08383B complies with EU Directives 2014/53/EU, 2011/65/EU and 2009/125/EC.

Full text available at: www.owim.com [CE Mark]