SMART LED LIGHT BULB
This quick start guide is a fixed part of the operating instructions, which enables you to start up your product immediately. Read the operating instructions before use, and pay particular attention to the safety instructions.
In order to fully understand all functions of the product, please select the User Manual link in the app's [Me tab]. You may also download the full operating instructions from this website: http://www.lidl-service.com
Keep this quick start guide in a safe place. When passing this product on to third parties, be sure to include all documentation.
Contents
Intended use: Page 6
You will need: Page 6
Technical data: Page 7
Pairing product and mobile device: Page 8
Unpairing product from mobile device: Page 10
Resetting product manually: Page 11
Disposal: Page 12
Simplified EU declaration of conformity: Page 13
Intended use
This smart LED light bulb (hereinafter called "product") is used for lighting up interiors.
| Suitable | Not suitable |
|---|---|
| Private use | Industrial/commercial purposes |
| Use in tropical climates |
Any other use is considered improper. Any claims resulting from improper use or due to unauthorised modification of the product will be considered unwarranted. Any such use is at your own risk.
The [Lidl Home app] is required to control and set up the product.
You will need
[Gateway icon]: Gateway: (Sold separately. Please visit Lidl website for further details)
[Router icon]: Router: 2.4 GHz, IEEE 802.11b/g/n
[Mobile device icon]: Mobile device: iOS 9.0 or higher, Android 5.0 or higher
Technical data
| Model | HG08130A | HG08130B | HG08130C |
|---|---|---|---|
| Rated power | 5 W | 6 W | 9 W |
| Networked standby power (Pnet) | 0.38 W | 0.27 W | 0.27 W |
| Lamp socket | GU10 | E14 | E27 |
| Total luminous flux (6500 K) | 350 lm [In a sphere (360°)] 280 lm [In a cone (90°)] | 470 lm [In a sphere (360°)] | 806 lm [In a sphere (360°)] |
| Measurements (mm) (Ø x L) | 50 x 55 | 39 x 120 | 60 x 115 |
| Operating voltage | 230 V~, 50 Hz | ||
| Frequency band | 2405 to 2480 MHz | ||
| Max. transmitted power | 13 dBm | ||
| Life | 30000 h | ||
| Switching cycles | 100000 | ||
| Communication protocol | ZigBee 3.0 | ||
| Reception range | approx. 70 m (free area) | ||
Pairing product and mobile device
NOTES:
- The Android version of the app follows the same principles as the iOS version; you might encounter discrepancies between the two platforms, such as slightly different on-screen commands or icons.
- Updating the firmware might result in changes to the app's functionality.
An updated instruction manual can be found here:
Tap [Me tab] then [User Manual].
Preparation
- Install [Lidl Home app] and setup Gateway (refer to Gateway instruction manual).
- 1. Light switch off.
- 2. Screw product into lamp socket.
- 3. Light switch on. Product flashes slowly.
- 4. Ready for pairing.
- 5. Open [Lidl Home app].
- 6. In the [Home tab]: Tap [Add icon] (add further devices).
- 7. Select category: [Lighting]
- 8. Select: Smart LED light bulb
- iOS: [White]
- Android: [White]
- 9. Select Gateway. [Info icon] Only necessary, if you have 2 or more Gateways.
Following Pairing Steps
- 10. Follow the app instructions.
- 11. Establishing connection.
- 12. Naming the product: Tap [Edit icon] and enter a name.
- 13. Tap one of the rooms to set location of product (selected room is grayed out). [Info icon] If more than one product is connected: You can rename the product and define its location.
- 14. Tap [Done].
- 15. Pairing completed.
- 16. Return to home screen: Tap [<].
Unpairing product from mobile device
- 1. Open [Lidl Home app].
- 2. In the [Home tab]: Tap [White].
- 3. Tap [Edit icon].
- 4. Tap [Remove Device]. Select:
- [Disconnect]
- or
- [Disconnect and wipe data] (refer to "Additional functions" in the full instruction manual)
- 5. Tap [Confirm].
Resetting product manually
- 1. Light switch on/off 3 times.
- 2. Light switch on. Product flashes slowly. Reset successful. [Info icon] This function only resets the data which is stored in the local memory of the product. If you want to reset the cloud memory as well, perform a reset via the app (see "Additional functions", [Disconnect and wipe data] in the full instruction manual).
Disposal
[Info icon] Before passing on, disposing of or returning the product to the manufacturer, make sure that all data has been deleted from the product and the cloud. To do this, refer to the full instruction manual's chapter: "Additional functions", menu point: [Disconnect and wipe data].
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
[Recycling symbol] Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibreboard / 80-98: composite materials.
The product and packaging materials are recyclable, dispose of it separately for better waste treatment.
The [Triman logo] is valid in France only.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
Simplified EU declaration of conformity
Hereby, OWIM GmbH & Co. KG, Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY declares that the product SMART LED LIGHT BULB HG08130A, HG08130B, HG08130C is in compliance with Directive 2014/53/EU, 2011/65/EU and 2009/125/EC.
The full text of the EU declaration of conformity is available at the following internet address: www.owim.com
CE
