Monster Bluetooth® Audio Receiver

Introduction

Features

• Hands-free talking
• Siri® and Google Assistant virtual assistant
• Stream music to traditional audio devices via Bluetooth technology
• Multi-device Bluetooth pairing

What's Included

• Bluetooth Audio Receiver
• 3.5mm Adapter
• 3.5mm Aux Cable
• RCA to 3.5mm Adapter
• Micro USB Charging Cable
• Home Charger
• Car Charger

Safety Instructions

Please read and understand all instructions before using this product. Failure to follow instructions may void the warranty.

• Keep these instructions.
• Do not drop, puncture, or disassemble this product.
• Do not expose this product to liquids.
• Avoid long exposure to direct sunlight.
• Do not expose this product to open flames.
• Do not use the product in a strong magnetic field.
• Use a clean, soft cloth for cleaning. Do not use corrosive cleaners/oils.

WARNING: KEEP YOUR ATTENTION ON THE ROAD. DO NOT OPERATE THE CONTROLS OF THIS PRODUCT WHILE DRIVING.

At a Glance

Multi Function Button (MFB):

• Press to play and pause music.
• Press to answer and end calls.
• Press + hold to reject incoming calls.
• Double press for last number redial.
• Press + hold to activate Siri or Google Virtual Assistant.

Microphone

Micro USB Port

3.5mm Aux Port for car or earphone connection

LED Indicator

On/Off Power Button

Get Started

For Home

1. Using the included Micro USB cable & USB Wall Charger, fully charge your Monster Bluetooth Audio Receiver for a minimum of three (3) hours.
2. Connect the Bluetooth Audio Receiver to your home stereo or headphones aux port using the included 3.5mm Aux Cable. (For audio devices with RCA output, the RCA to 3.5mm Adapter may be used.)
3. Enable Bluetooth search mode on your audio device and search for the pairing name "MONSTER MBA9-1009". Select it on your device to pair.
4. Once connected, the LED indicator will slowly flash blue, indicating the receiver is ready to use.

For Car

1. Using the included Micro USB cable & USB Car Charger, fully charge your Monster Bluetooth Audio Receiver for a minimum of three (3) hours.
2. Connect the Bluetooth Audio Receiver to your car stereo's aux port using the included 3.5mm to 3.5mm Adapter (or the 3.5mm Aux Cable if more length is needed).
3. Enable Bluetooth search mode on your audio device and search for the pairing name "MONSTER MBA9-1009". Select it on your device to pair.
4. Once connected, the LED indicator will slowly flash blue, indicating the receiver is ready to use.

Usage

Play Music

Plug the receiver directly into a car or home stereo input aux jack using the included 3.5mm adapter or aux cable. For headphone use, plug headphones directly into the Bluetooth Audio Receiver. Press the Multi-Function Button (MFB) to play/pause music.

Activate Your Voice Virtual Assistance

Press and hold the Multifunction Button (MFB) for 3 seconds to activate. Speak through the receiver when prompted. Alternatively, activate your smartphone's "Hey Siri" or Google "Voice Match" feature and speak directly to your phone; the audio will transmit through the receiver.

Multi-Device Pairing

This feature allows two devices to be connected simultaneously. Pair the first device as noted in "Get Started". Then, "disconnect" the first device (while still paired) and pair the second device. Once the second device is paired, you can re-connect the first device.

Hands-free Talking

The Bluetooth audio receiver automatically switches to phone mode when receiving calls and returns to music mode when the call is complete.

• Press MFB to answer and end calls.
• Double press MFB for last number redial.
• Press MFB for 3 seconds to reject an incoming call.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's warranty or authority to operate the equipment.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed or mobile conditions. The minimum separation distance is 20cm.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this occurs, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

The device has been evaluated to meet general RF exposure requirement.

Customer Service

1 Year Limited Warranty

Phone: 866-246-2008