Baseus i-wok Series USB Asymmetric Light Source Screen Hanging Light (Youth)
Instruction Manual
1. Product Introduction
The Baseus i-wok Series USB Asymmetric Light Source screen hanging light features an asymmetric light source design. This design reduces screen reflection and glare, making it comfortable for the eyes during nighttime work and gaming.
2. Product Features
- Asymmetric Light Source
- No Blue Light / No Stroboflash
- 3 Lighting Modes
- Touch Control for Stepless Dimming
- Simple Alloy Process
- Installed and Fixed in 1 Second
- Stable Metal Counterweight
- USB Power Supply
3. Product Parameters
- Model: DGIWK-B01/DGIWK-B02
- LED quantity: 80Pcs
- Material: Aluminum Alloy+PC+ABS
- Color rendering index: 80
- Voltage: 5V
- Lumen value: 160lm
- Power: 5W (Max)
- Product size: 450 x 66 x 92mm
- Light source: LED
- Product weight: 480g
- Color temperature: 5500K (White Light) - 2800K (Warm Light) - 4000K (Mixed Light)
4. Product Accessory List
- Screen hanging light *1
- USB power cable (1.5m) *1
- Manual *1
5. Name of Product Parts
Product front view:
- Lamp body
- Light source surface
- Brightness adjustment
- On/off
- Lighting modes
Product side view:
- Damped rotating shaft
Product rear view:
- Type-C charging interface
- Counterweight base
6. Usage Instructions
Installation Instructions:
- Clamp the lamp body in the middle of the top of the screen. Suitable for screens of 6mm-28mm thickness.
- Insert the USB power cable into the Type-C interface of the lamp body, and connect the other end of the USB power cable to the USB output port of the computer or a 5V adapter. Notice: It may cause damage to the product and safety hazards if use an adapter or power supply device greater than 5V to power up the product!
- Turn the lamp body to adjust the lighting angle and complete the installation.
Usage Instructions:
- Turn on/off: Touch the switch button.
- Lighting modes: Cycle through white light (5500K), warm light (2800K), and mixed light (4000K) by touching the lighting modes button.
- Stepless dimming: Long press the dimmer switch to adjust the brightness steplessly.
- Memory function: When powered on via USB, the light turns on in the previous mode by default after being turned off. Note: The memory function does not work if the USB power cable is unplugged or if there is a power outage followed by turning the lamp on again. In such cases, the white light mode will turn on by default.
7. Names and list of hazardous substances in product
This form is compiled in accordance with SJ/T 11364.
| Hazardous substances | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent chromium (Cr(VI)) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) |
|---|---|---|---|---|---|---|
| Lampshade | Ο | Ο | Ο | Ο | Ο | Ο |
| Plastic parts | Ο | Ο | Ο | Ο | Ο | Ο |
| PCB | X | Ο | Ο | Ο | Ο | Ο |
| LED optical parts | Ο | Ο | Ο | Ο | Ο | Ο |
| Tube part | Ο | Ο | Ο | Ο | Ο | Ο |
Note:
- 'Ο' indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
- 'X' indicates that the content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
The "environmental protection service life of this product is 10 years", and the pollution control label is shown on the left. The harmful substances contained in electronic and electrical products will not be leaked or mutated, and the period of normal use of the electronic and electrical products by the electronic and electrical users will not cause serious pollution to the environment or cause serious damage to people and property.
8. Safety Warnings and Cautions
- Please use a 5V adapter or power supply equipment to supply power to the product, such as: computer, screen USB output port, 5V adapter, power bank, etc.; if you use an adapter or power supply equipment above 5V, it may cause product damage and bring security risks!
- Do not use in unstable places to avoid dumping and damaging the lamp.
- Do not cover flammable materials such as cloth or paper on the lamp to avoid fire accidents.
- Do not use this product in a damp environment.
- Do not plug or unplug the USB power cable with wet hands to avoid electric shock.
- Please clean the product regularly. When cleaning the product surface, unplug the power supply and wipe it with a soft cotton cloth. Do not use liquid, spray cleaner, or damp cloth for cleaning.
- Do not touch the hot part of the lamp body when the lamp is on or within 3 minutes after turning off the lamp to avoid burns.
- When not using the lamp for a long time, please pull out or cut off the power of the USB power cable.
- Do not disassemble the product by yourself.
- This product is for indoor use only.
- If the product is found to be faulty, please do not disassemble the product yourself to avoid damaging the product; it can be sent to the company's maintenance personnel for repair.
- The light source of this lamp is irreplaceable. When the light source reaches the end of its life, the entire lamp should be replaced.
