NIIMBOT D101 Label Printer

01 Package Contents

Illustration of the NIIMBOT D101 label printer, a compact, rectangular device with a textured top panel featuring buttons.

• Label Printer *1
• Label Paper Roll *1
• USB Type-C Cable *1
• Quick System Guide *1

02 Installation

Step 1: Slide the slider to the left to open the lid.

Illustration showing the printer lid open, revealing the paper compartment and a movable partition.

Step 2: Remove or keep the partition according to the label paper width.

Note on partition: If your label paper is not wider than 15 mm, insert it directly. If its width is 15-27 mm, remove the partition before installation.

Step 3: After confirming the width, install the label paper roll on the right side of the paper compartment, with the print side down.

Illustration: Diagram showing how to insert the label paper roll into the printer, with an arrow indicating the paper path and the print side facing down.

Step 4: Close the lid. Long press the power button, and the printer will be ready for use.

Illustration of the printer with an indicator pointing to the power button.

03 App Installation

Step 1: Before using the printer, install the NIIMBOT app from Google Play or the App Store.

Illustration: NIIMBOT app logo and name.

Download on the App Store | Get it on Google Play

Further information is available in the NIIMBOT app. Navigate through: Log in to NIIMBOT App -> Me -> Help Center -> Hardware.

Step 2: Get the NIIM app for more home label designs.

Illustration: NIIM app logo and name.

Download on the App Store | Get it on Google Play

04 Connection and Printing

Step 1: Open the NIIMBOT app and turn on Bluetooth on your phone.

Illustration: Smartphone displaying the NIIMBOT app interface.

Illustration: Bluetooth symbol indicating wireless connection.

Step 2: On the home screen, tap "Connect label printer". Then select the device model.

Note: If a PIN code is required, enter 0000 or 1234.

Step 3: After connecting, tap "Current label template" on the Home tab and enter the label editor.

Special Notes: Product images, accessories, and the app in this guide are for illustration purposes only and may differ from actual products. Products may change without prior notice.

05 Basic Functions

06 LED Indicators

07 Specifications

08 Safety Precautions

Before using this product, please read all instructions and warnings in this guide carefully to ensure the proper functioning of the device and your safety.

Warning:

• [No Disassembly] - Do not disassemble the product without authorization. Disassembled products cannot be returned or exchanged.
• [Cleaning Caution] - Do not wipe the product with corrosive chemicals or cleaning agents.
• [Flammable Area Caution] - Do not use the product near flammable materials, such as gas stations or fuel depots.

1. Keep the product and accessories out of reach of children or use them under the supervision and guidance of a guardian.
2. If water gets into the product, turn off the power immediately.
3. In case of any product malfunction, turn off the power immediately.
4. If you intend to use a power adapter, always use one that is safe, complies with regulations, and is compatible.
5. Do not disassemble the product to replace the battery. Improper operation may cause an explosion.
6. The battery contains a special protective circuit. Do not disassemble the battery without authorization, otherwise, it may cause circuit shock or leakage. If electrolyte gets into your eyes, rinse them immediately with water and seek medical attention.
7. Do not expose the product and power adapter to high temperatures or high humidity. Do not immerse them in water, otherwise, it may cause circuit shock, and the battery may heat up, smoke, deform, be damaged, or even explode.
8. If smoke or odor comes from the product or power adapter, unplug the power adapter immediately to prevent burns.

09 Related Declarations

Consult your dealer or an experienced technician. The device has been evaluated to meet general radio wave exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.

NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device causes harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and the receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected.

Declaration of Conformity

Wuhan Jingchen Intelligent Identification Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product may be used in all EU member states. Wuhan Jingchen Intelligent Identification Technology Co., Ltd. hereby declares that the radio equipment type [NIIMBOT D101] is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://www.niimbot.com.

Canadian Declaration

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.